The Role of Tumor Microenvironment Cells in Colorectal Cancer (CRC) Cachexia

Cancer cachexia (CC) is a multifactorial syndrome in patients with advanced cancer characterized by weight loss via skeletal-muscle and adipose-tissue atrophy, catabolic activity, and systemic inflammation. CC is correlated with functional impairment, reduced therapeutic responsiveness, and poor prognosis, and is a major cause of death in cancer patients. In colorectal cancer (CRC), cachexia affects around 50–61% of patients, but remains overlooked, understudied, and uncured. The mechanisms driving CC are not fully understood but are related, at least in part, to the local and systemic immune response to the tumor. Accumulating evidence demonstrates a significant role of tumor microenvironment (TME) cells (e.g., macrophages, neutrophils, and fibroblasts) in both cancer progression and tumor-induced cachexia, through the production of multiple procachectic factors. The most important role in CRC-associated cachexia is played by pro-inflammatory cytokines, including the tumor necrosis factor α (TNFα), originally known as cachectin, Interleukin (IL)-1, IL-6, and certain chemokines (e.g., IL-8). Heterogeneous CRC cells themselves also produce numerous cytokines (including chemokines), as well as novel factors called “cachexokines”. The tumor microenvironment (TME) contributes to systemic inflammation and increased oxidative stress and fibrosis. This review summarizes the current knowledge on the role of TME cellular components in CRC-associated cachexia, as well as discusses the potential role of selected mediators secreted by colorectal cancer cells in cooperation with tumor-associated immune and non-immune cells of tumor microenvironment in inducing or potentiating cancer cachexia. This knowledge serves to aid the understanding of the mechanisms of this process, as well as prevent its consequences.     

Synthesis of trimethylene carbonate/ϵ‐caprolactone copolymers initiated with zinc alkoxide: influence of copolymer chain microstructure on thermal and mechanical properties

Ethylzinc(II ) ethoxide is a highly active and efficient initiator for the bulk polymerization of 1,3‐trimethylene carbonate and its copolymerization with ? ‐caprolactone. This initiator allows one to obtain (co)polymers with high molar masses in quite a short time. Significant difference in co‐monomer reactivity and relatively low participation of intermolecular transesterification processes lead to the obtained copolymers being characterized by a gradient chain microstructure. In ¹³C NMR spectra, in all regions, we observed the presence of triads which were distinctly represented by four peaks for the carbonyl signal. Mechanical tests showed that copolymers containing 70% and more of ? ‐caprolactone presented a relatively high Young's modulus and a very high maximum elongation factor; therefore these materials are promising in many biomedical applications. Due to the high reaction rate, we also made an attempt at copolymerization using reactive extrusion which gave promising results. © 2017 Society of Chemical Industry     

Accuracy and uncertainty of single-shot, nonresonant laser-induced thermal acoustics

We study the accuracy and uncertainty of single-shot nonresonant laser-induced thermal acoustics measurements of the speed of sound and the thermal diffusivity in unseeded atmospheric air from electrostrictive gratings as a function of the laser power settings. For low pump energies, the measured speed of sound is too low, which is due to the influence of noise on the numerical data analysis scheme. For pump energies comparable to and higher than the breakdown energy of the gas, the measured speed of sound is too high. This is an effect of leaving the acoustic limit, and instead creating finite-amplitude density perturbations. The measured thermal diffusivity is too large for high noise levels but it decreases below the predicted value for high pump energies. The pump energy where the error is minimal coincides for the speed of sound and for the thermal diffusivity measurements. The errors at this minimum are 0.03% and 1%, respectively. The uncertainties for the speed of sound and the thermal diffusivity decrease monotonically with signal intensity to 0.25% and 5%, respectively.     

Structure and properties of 6061 + 26 mass% Si aluminum alloy produced via coupled rapid solidification and KOBO-extrusion of powder

Experiments on mechanical consolidation of rapidly solidified (RS) powder of 6061 + 26 mass% Si alloy were performed using the oscillating-die extrusion method. The RS powder was wrapped in thin-wall 6061-alloy cup 35 mm in diameter and vacuum-compressed by means of 100 ton press. Bars 8 mm in diameter were extruded with cross-section reduction of λ = 19 without any preheating of the charge. Tubes with a diameter/wall thickness of 14 mm/1 mm and cross-section reduction of λ = 33 were also manufactured with success. TEM/STEM observations revealed a very fine structure of as-extruded material and bimodal distribution of quasi-spherical silicon particles. Statistical analysis revealed a silicon fine fraction of 0.1–0.7 μm and a coarse fraction 2.1–2.5 μm in diameter. Examination by means of TEM did not reveal any significant changes in the morphology of the silicon particles, even when a high extrusion ratio and the material annealing after deformation were used. Hot compression tests on as-extruded rods (λ = 19) and preliminary annealed samples were performed at a constant true strain rate of 5 × 10^?3 s^?1 within the temperature range of 293–823 K. High strength of the material and relatively high ductility of samples deformed by compression up to ?_t ? 0.4 were observed. The maximum flow stress value for as-extruded material was reduced with deformation temperature from ～390 to ～3.5 MPa for 293 and 823 K, respectively. Annealing of the samples at 773 K/30 min was found to reduce the maximum flow stress by 30–40%. Tensile strengths of similar as-cast alloys and materials manufactured by means of other powder metallurgy methods were shown for the purpose of comparison.     

Accelerated weathering of pectin/poly(vinyl alcohol) blends studied by spectroscopic methods

The blends of pectin (PEC) and poly(vinyl alcohol) (PVA) at different components ratios were prepared by mixing in water. Thin polymeric films of PEC/PVA blends and pure polymers were obtained by casting method. All samples were then artificially aged using Suntest apparatus (Atlas) up to 780 h. The changes in chemical structure during sample ageing have been monitored by infrared and ultraviolet‐visible absorption spectroscopies. The first stage of weathering (up to ～ 300 h) was very slow and alteration of chemical structure was negligible in all samples. Prolonged ageing (>300 h) caused more significant degradation processes. FTIR spectra exhibited the highest changes in hydroxyl and carbonyl band ranges indicating the efficient photooxidation of macromolecules. The mechanisms of the observed processes have been discussed. It was found that PVA undergoes faster photoxidative degradation than pectin aged at the same conditions. The PEC/PVA blends exhibited the improved resistance to weathering comparing with both polymers aged individually. Mutual stabilization effect can be explained by intermolecular interactions between PEC and PVA confirmed by spectroscopic methods. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Silver nanostructured catalyst for modification of dielectrics surface

The preparation of nano-size Ag particles and their application for forming nanostructured catalysts on various surfaces are described. Silver colloid solutions were prepared by reduction of Ag(I) salt by tin(II) and characterized by electron microscopy, X-ray diffraction and light absorption spectra. Depending on the colloid preparation conditions metal particles of 5-100 nm size were obtained. According to XRD data, the colloid particles contain Ag and SnO₂ phases and no metallic Sn. The Ag nanoparticles were found to be efficient electrocatalysts for anodic oxidation of formaldehyde in alkaline solutions. The catalytic activity of a glassy carbon electrode with Ag surface coverage of 0.3-1 μg cm⁻² is similar or even exceeds that of the metallic electrode. The silver particles were used for the initiation of the electroless copper deposition process on dielectrics; for that 1-2 μg cm⁻² Ag is needed.     

Accepted practices of thermal spray technology

This is the fourth and final article in a series of articles dealing with the metallographic preparation and evaluation of thermal spray coatings. Previous articles have covered variables and best practices for the sectioning, mounting, and coarse grinding of coated components. In this article, the relationship between fine grinding and polishing practices, consumables, and resultant plasma spray coating structure are discussed.     

Improving Steam Boiler Operation by On-Line Monitoring of the Strength and Thermal Performance

The operation of steam boilers with high efficiency requires control of thermo-hydraulic and strength parameters in the on-line mode. During operation under transient conditions, there are significant temperature differences over the circumference of the horizontal pressure vessels. This occurrence is caused by the different values of heat transfer coefficients on the inner surface of the boiler drum in the water and steam region. Large thermal stresses can occur in partially filled horizontal vessels. This takes place in large steam generator drums, superheater headers, and steam pipelines. The paper presents a method for determination of thermo-flow parameters for steam boilers. This method allows performing the calculations of the boiler furnace chamber and heating flow rates absorbed by superheater stages. These parameters are important for monitoring the performance of the power unit and determining the degree of the furnace chamber slagging. Knowledge of these parameters allows determining the degree of the furnace chamber slagging. The calculation can be performed in online mode and use to monitoring of steam boiler. The presented method allows to the operation of steam boiler with high efficiency.