A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Surface Chemistry of Lead Titanate and Its Impact on Binder Removal

Carbon residue after binder burnout was characterized for several nonstoichiometric lead titanate powders. Thermal decomposition of the poly(methyl methacrylate) (PMMA) binder was performed in nitrogen at 600°C. A drastic decrease in carbon retention was obtained in the case of the titanium-rich samples. The amount of carbon retention varies from 0.2 mg/m² to 1.2 mg/m² by changing the Pb/Ti molar ratio from 0.92 to 1.08. The surface reaction between PMMA and lead titanate particles was studied by diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS). Surface hydroxyls reacted with ester groups in the PMMA or the methylmethacrylate monomer produced upon pyrolysis. The DRIFTS results showed that titaniumrich samples are less reactive and produce less surfacebound organic groups. Interestingly, titanium-rich samples contained more surface hydroxyls. Isoelectric point measurements, however, show that titanium-rich samples are more acidic. Thus, the reactivity of the surface hydroxyls is determined primarily by their acid-base characteristics rather than their concentration. Lead titanate powder was exposed to MMA vapor in a tube furnace at the indicated temperatures using nitrogen carrier gas as a model experiment. DRIFTS difference spectroscopy and Raman spectroscopy were performed on these samples after the exposure. MMA reacts with lead titanate powder in manner similar to PMMA. Analysis for sp ² and sp ³ absorbance of Raman spectra of these exposed powders at 400°–600°C showed pyrolysis behavior of surface-reacted species. The relative amount of sp ² bonded carbon decreases with increasing exposure temperature.     

Pheromone biosynthesis in lepidoptera

Pheromone components for many lepidopteran species are produced by the use of unique chain-shortening and 9, 10, and 11 desaturase systems. Correlations in the Tortricidae indicate that the pheromone components derived from 9 and 01 desaturases are found in the more primitive species (those possessing morphological plesiomorphies). The precise blend ofZ andE acetates in a number of species is regulated in the final reduction sequence from acyl intermediates. Preliminary research has been conducted on the characterization of the various desaturase enzymes used and on the important blend regulating sequence. Initial purification work on the 11 desaturase enzyme found in the cabbage looper moth is reported.     

Effect of Composition and Size of Crystallite on Crystal Phase in Lead Barium Titanate

Lead titanate, barium titanate, and lead barium titanate powders (>99.9% pure), the particle size of which varied from 0.03 to 0.15 μm depending on the calcination temperature and the composition, was prepared from barium lead titanyl oxalate, which was previously prepared by reacting high-purity ammonium titanyl oxalate with barium and lead acetate. The critical crystallite size of BaTiO₃ powder from the cubic to the tetragonal phase is around 1 μm. Pb_0.3Ba_0.7TiO₃ powder with an average size of 0.057 μm showed the tetragonal phase.     

Preparation of Spherical, Submicrometer Oxide Particles by Hydrolysis of Emulsified Alkoxide Droplets

A new method for forming spherical, submicrometer ceramic oxide particles by the hydrolysis of emulsified alkoxide droplets is reported. Emulsions are formed of alkoxide droplets dispersed in an inert, polar solvent. The alkoxide droplets are hydrolyzed to form oxide particles by adding water to the emulsion. It was shown that individual droplets acted as "microreactors" and controlled the powder size, shape, and composition. Both single-oxide and mixed-oxide powders were formed by this technique.     

The pheromone of the eastern tent caterpillar,Malacosoma americanum (F.) (lepidoptera,Lasiocampidae)

The pheromone system of the eastern tent caterpillar,M. americanum, has been identified as a mixture of (E,Z)-5,7-dodecadienal and the corresponding alcohol. Field data on the attractiveness of the aldehyde alone were not consistent, but mixtures of aldehyde and alcohol in varying proportions were attractive to males. Addition of small amounts ofE,Z acetate toE,Z aldehyde had no effect on male response, but larger amounts reduced trap catch. Traps baited withZ,E, E,E, orZ,Z aldehydes were not more attractive than blank traps. Pherocon IC traps fortified with extra adhesive and baited with lures consisting of 500 µg (E,Z)-5,7-dodecadienal with either 250 or 100 µg of the corresponding alcohol trapped as many as 100 males/trap/night with means of 15–20. Lures prepared from purified (94%E,Z) aldehyde and alcohol were more attractive than those prepared from unpurified (58%E,Z) materials.DeceasedMention of a company name or proprietary product does not constitute an endorsement by the U.S. Department of Agriculture.     

Identification of the female-produced sex pheromone of the scarab beetle,Hoplia equina

Hoplia equina LeConte (Coleoptera: Scarabaeidae: Melolonthinae) is a beetle pest of cranberry beds in Massachusetts. Larvae feed on the roots of the cranberry plant, reducing yield as well as vine density. The female sex pheromone was identified as 2-tetradecanone. There were eight compounds found in the airborne volatiles collected from females that elicited antennal responses from males. Of the eight compounds tested (nonanal, decanal, dodecanal, 2-dodecanone, 2-tridecanone, 2-tetradecanone, 2-pentadecanone, and 2-hexadecanone), 2-tetradecanone was the only one that attracted male beetles in the field. Combining any of the other seven antennally active compounds with 2-tetradecanone did not increase male capture.     

Ecological efficiency and thermoeconomic analysis of a cogeneration system at a hospital

This work aims with an approach for cogeneration plants evaluation based on thermoeconomic functional diagram analysis. The second law of thermodynamics is used to develop a methodology to analyse cogeneration systems, based on exergoeconomics evaluation. The thermoeconomic optimisation method developed is applied to allow a better configuration of the cogeneration plant associated to a university hospital. Also ecological efficiency is evaluated. The method was efficient and contributes for thermoeconomics modelling and analysis and can be applied to any sort of thermal system, especially those with combined heat and power in thermal parity.     

Uncertain Classification of Fault-Prone Software Modules

Many development organizations try to minimize faults in software as a means for improving customer satisfaction. Assuring high software quality often entails time-consuming and costly development processes. A software quality model based on software metrics can be used to guide enhancement efforts by predicting which modules are fault-prone. This paper presents statistical techniques to determine which predictions by a classification tree should be considered uncertain. We conducted a case study of a large legacy telecommunications system. One release was the basis for the training dataset, and the subsequent release was the basis for the evaluation dataset. We built a classification tree using the TREEDISC algorithm, which is based on ² tests of contingency tables. The model predicted whether a module was likely to have faults discovered by customers, or not, based on software product, process, and execution metrics. We simulated practical use of the model by classifying the modules in the evaluation dataset. The model achieved useful accuracy, in spite of the very small proportion of fault-prone modules in the system. We assessed whether the classes assigned to the leaves were appropriate by statistical tests, and found sizable subsets of modules with uncertain classification. Discovering which modules have uncertain classifications allows sophisticated enhancement strategies to resolve uncertainties. Moreover, TREEDISC is especially well suited to identifying uncertain classifications.