Color registration error reduction method compensating the influence of belt thickness variation in electrophotographic process

This paper proposes a new belt drive control method for reducing a belt velocity-fluctuation that is caused by a belt thickness-variation in the circumferential direction. A belt driving system performs feedback control with a rotary encoder-output mounted on a driven roller. This proposed method correct the reference value of the feedback control for the purpose of the belt velocity regulation. The correction includes two steps. The first step acquires the encoder-output of the driven roller and calculates the rotational angular velocity-fluctuation with one cycle of the belt rotation. The second step converts from the velocity-fluctuation to the correction value of the feedback reference. The correction value cancels a detection error of the driven roller caused by the belt thickness-variation. After these steps, the belt driving system controls the belt velocity as compensating the belt velocity-fluctuation. Experimental result showed the significant fluctuation reduction on a typical tandem-engine printer.     

Schottky barrier heights of contact metals to p-type ZnSe

Schottky barrier heights (SBHs) of a variety of metals (In, Cd, Nb, Ti, W, Cu, Ag, Au, Ni, Pt, and Se) contacting to p-ZnSe grown by a molecular beam epitaxy method were determined by analyzing capacitance-voltage (C-V) and/or current density-voltage (J-V) curves. The SBH values of the Au and Ni contacts were determined from intersections of straight lines of the C⁻²-V curves to be 1.23 and 1.13 eV, respectively. The J-V calculations provided a large SBH value of 1.2 ± 0.1 eV for a variety of metals, indicating that the Fermi-level could be pinned at the contact interface. Reduction of the SBH values to a level lower than 0.4 eV and/or increase of doping concentrations to a level higher than 10²⁰ cm⁻³ are essential to obtain an ohmic contact with contact resistivity of around 10⁻³ Ω·cm².     

The effects of 18 alpha,beta-glycyrrhetinic acid on the hormonal induction of tyrosine aminotransferase in rat primary cultured hepatocytes

Complementary medicine (CM) is popular with patients but physicians do not feel at ease with this situation and some fear that the patient might be the loser. Their fear is based on the perception that some CM practitioners have dubious qualifications and competence and that too little is known about the efficacy and safety of many complementary therapies. It follows that, in the interest of the patient and all other parties involved, we urgently need more and better research to fill the void. Integration of complementary medicine into mainstream care requires a minimum of essential evidence. As in all areas of medicine, there can be no short cut to rigorous research.     

Electrical properties at p-ZnSe/metal interfaces

In order to prepare low resistance ohmic contacts to p-ZnSn by the “deposition and annealing (DA)” technique which has been extensively used for GaAs and Si-based devices, formation of a heavily doped layer by the p-ZnSe/metal reaction is required. For p-ZnSe/Ni contacts, Ni and Se reacted preferentially at the ZnSe/Ni interface upon annealing at temperatures higher than 250°C. However, capacitance-voltage measurements showed that the net acceptor concentration (N_A-N_D) close to the p-ZnSe/Ni interface was reduced upon the Ni/ZnSe reaction, resulting in high contact resistance. For p-ZnSe/Au contacts, neither Au/ZnSe reaction nor reduction of the acceptor concentration were observed after annealing at temperatures lower than 300°C. This indicates that although the metal/p-ZnSe reaction is mandatory to prepare a heavily doped layer, the reaction induced an increase in the compensation donors in the p-ZnSe substrate. In order to increase the acceptor concentration in the vicinity of the p-ZnSe/metal interface through diffusion from the contact materials, Li or O which was reported to play the role of an acceptor in ZnSe was deposited with a contact metal and annealed at elevated temperatures. Ni or Ag was selected as the contact metal, because these metals were expected to enhance Li or O doping by reacting with ZnSe. However, the current density-voltage characteristics of the Li(N)/Ni and Ag(O) contacts exhibited rectifying behavior, and the contact resistances increased with increasing annealing temperature. The present results indicated that, even though the acceptor concentration in the p-ZnSe substrate increased by diffusion of the dopants from the contact elements, an increment of the compensation donors was larger than that of the acceptors. The present experiments indicated that preparation of low resistance ohmic contacts by forming a heavily doped intermediate layer between p-ZnSe and metal is extremely difficult by the DA technique.     

On-chip Diamond MEMS Magnetic Sensing through Multifunctionalized Magnetostrictive Thin Film

Electrically integrable, high-sensitivity, and high-reliability magnetic sensors are not yet realized at high temperatures (500 °C). In this study, an integrated on-chip single-crystal diamond (SCD) micro-electromechanical system (MEMS) magnetic transducer is demonstrated by coupling SCD with a large magnetostrictive FeGa film. The FeGa film is multifunctionalized to actuate the resonator, self-sense the external magnetic field, and electrically readout the resonance signal. The on-chip SCD MEMS transducer shows a high sensitivity of 3.2 Hz mT⁻¹ from room temperature to 500 °C and a low noise level of 9.45 nT Hz^−1/2 up to 300 °C. The minimum fluctuation of the resonance frequency is 1.9 × 10⁻⁶ at room temperature and 2.3 × 10⁻⁶ at 300 °C. An SCD MEMS resonator array with parallel electric readout is subsequently achieved, thus providing a basis for the development of magnetic image sensors. The present study facilitates the development of highly integrated on-chip MEMS resonator transducers with high performance and high thermal stability.     

Size effect in the low-field Hall coefficient of single-crystal copper films

Measurements of the low-field Hall coefficientR _H of single-crystal copper films were made at 4.2 K by the use of a SQUID. The surface normaln of the samples was directed in the [100], [110], and [111] directions and the ratio of the thickness to the mean free path ranged from 0.1 to 0.7. It is found that the effect of surface scattering causesR _H to decrease whenn [100], whereas it causesR _H to increase whenn [110] and [111]. This behavior is interpreted in terms of the geometrical characteristics of the Fermi surface.     

Robust tracking servo system considering force disturbance for the optical disk recording system

This paper proposes a new robust tracking servo system for the optical disk recording system with feedforward controller based on the prediction of the tracking error. In optical recording systems, the feedback servo system must suppress the influence of force disturbance and parameter variation. To overcome this problem, this paper designs the robust feedback control system by using coprime factorization and disturbance observer. The detecting signal of the optical disk recording system is only a tracking error. Hence, the feedforward controller of the proposed tracking control system is constructed based on both the "zero-phase-error tracking" control theory and the prediction of the tracking error. The experimental results point out that the proposed tracking servo system has a quick and precise tracking response and keeps the residual tracking error below its tolerance.     

Charge behavior in flowing oil in oil/ pressboard insulation system by electro-optic field measurement

The electrical insulation structure of most power transformers is a combination of insulating oil and solid materials. One of the crucial problems we face in transformer operation is flow electrification, which occurs at a flowing oil/solid material interface. Thus, for the transformer insulation design, we need to clarify the now electrification phenomena. In this paper, we measured the electric field strength in an oil/pressboard composite insulation system using an electro-optic method of the Kerr effect. We obtained the time variation of electric field distribution in both flowing uncharged and charged oil. It is notable that we could quantitatively clarify the electric field distortion in flowing charged oil by flow electrification. Furthermore, we measured the leakage current from divided electrodes and derived a charge density distribution along the flow direction. Finally, we quantitatively discussed the electric field distribution and the charge behavior from the measurement results.     

Effects of Using Alternative Extreme Pressure (EP) and Anti-Wear (AW) Additives with Oxy-Nitrided Samples

Oxy-nitriding is a widely used industrial process aiming to improve the tribological properties and performance of components. Previous studies have shown the effectiveness of the treatment with friction and wear performance, but very few have focussed on optimising this behaviour. The lubrication properties of several EP and AW additives were examined to investigate their effectiveness in improving the tribological properties of the layers formed after treatment. Previous studies showed the presence of an oxide layer on the sample could improve the effectiveness of the sulphurised olefin (SO) and tricresyl phosphate (TCP) additives. The friction and wear behaviour of oxy-nitrided samples were analysed using a tribometer and surface profiler. Scanning electron microscope, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were employed to identify the morphologies and chemical compositions of the treated surface before and after testing. No real effect on friction was observed when using the SO or TCP additives, mostly due to lack of interaction with the less reactive iron nitride layer and their roles as anti-wear additives. However, when the zinc dialkyldithiophosphate-containing lubricant was used, a higher friction coefficient was observed. Greater improvements in anti-wear properties with the presence of additives in comparison with only using base oil were reported, with the TCP additive producing the lowest wear rates. The study effectively demonstrated that the additive package type used could impact the tribological and tribochemical properties of oxy-nitrided surfaces.