Synthesis of new hyperbranched urethane-acrylates and their evaluation in UV-curable coatings

Three series of hyperbranched urethane-acrylates (HB-UA), based on aliphatic hyperbranched polyesters and polyethyleneglycol acrylate, were prepared and evaluated for use in UV-curable coatings. UV-curing kinetics were monitored by FT-IR spectroscopy. The thermal and mechanical properties of UV-cured HB-UA were investigated by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) and correlated to the mechanical properties of coatings (hardness and flexibility). These new HB-UA's are very reactive and did not show oxygen inhibition. Obtained coatings have good mechanical properties and solvent resistance.     

Triple-product optical processor for analysis of pulse-repetition and carrier frequencies of radar signals

A triple-product acousto-optic processor output was studied analytically and numerically. The processor is capable of detecting the carrier frequency and the modulation envelope of a signal.     

Rheological properties of hydroxyl‐terminated and end‐capped aliphatic hyperbranched polyesters

The rheological behavior of two series of aliphatic hyperbranched (HB) polyesters, based on 2,2‐bis(hydroxymethyl)propionic acid (bis‐MPA) and di‐trimethylol propane (Di‐TMP) as a tetrafunctional core, was studied. The effect of the size (pseudo‐generation number, from second to eight) and structure on the melt rheological properties was investigated for a series of hydroxyl‐terminated HB polyesters. In addition, the influence of the nature and degree of modification of the terminal OH groups in a series of fourth‐generation polyesters end‐capped with short and long alkyl chains and some aryl groups on the rheological properties was analyzed. The time–temperature superposition procedure was applied for the construction of master curves and for the analysis of the rheological properties of HB polyesters. The data obtained from WLF analysis of the HB polyesters showed that the values of the thermal coefficient of expansion of free volume α_f and the fractional free volume at the glass transition temperature, f_g, increase with increasing size of the HB polyesters. It was shown that the modified HB polyesters exhibited lower T_g and T_G′=G″ temperatures, above which viscous became dominant over elastic behavior. From an analysis of the master curves of the modified HB polyesters, it was observed that with increasing degree of modification, both storage and loss modules and complex dynamic viscosity and apparent energy for viscoelastic relaxation decrease, because of reduced intermolecular hydrogen interactions. They do not exhibit a plateau of rubbery behavior, which confirms that no entanglements are present and that the molar masses are below the critical molar mass. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41479.     

A study on the Co-W activated Ni electrodes for the hydrogen production from alkaline water electrolysis - Energy saving

Hydrogen is considered to be the most promising candidate as a future energy carrier. One of the most used technologies for the electrolytic hydrogen production is alkaline water electrolysis. However, due to high energy requirements of about 4.5-5 kWh/Nm³ H₂ in most industrial electrolysers, the cost of hydrogen produced in such a way is high. There are various attempts to overcome this problem, like zero-gap cell geometry, development of new diaphragm materials, development of new electrocatalytic materials for electrodes, etc.In continuous search to improve this process using advanced electrocatalytic materials for the hydrogen evolution reaction (HER), based on transition metal series, catalyst based of cobalt and wolfram was investigated as cathode material. On the basis of the results of our experiments, there is a strong indication that the Co-W catalyst reduces energy needs per mass unit of hydrogen produced for more than 20% in some cases. Objective of this work was to investigate the electrocatalytic efficiency using quasi-potentiostatic, galvanostatic and impedance spectroscopy techniques. Results are presented to show the Tafel slopes, the exchange current densities, the apparent energy of activation, the apparent electrochemical surface and the stability of Co-W catalyst. Results suggest to significant catalytic performance not only from the increase of the real surface area of electrodes, but also from the true catalytic effect of the Co-W catalyst.     

Computation of high-frequency and time characteristics of corona noise on HV power line

This work presents an algorithm for the computation of frequency and time characteristics of the corona noise in power-line carrier communications. In the frequency domain, the corona noise is represented with a power spectral density and with a Gaussian noise voltage with variable root mean square value in the time domain. Simulations results are compared with measurements on an actual 400-kV power line.     

Electrocatalytic activation of Ni electrode for hydrogen production by electrodeposition of Co and V species

Hydrogen is considered to be the most promising candidate as a future energy carrier. One of the most used technologies for the electrolytic hydrogen production is alkaline water electrolysis. Electrode materials used in alkaline water electrolysis are mainly made from Ni or Ni-based alloys due to their desirable mechanical and chemical stability in hot and alkaline solution. Considerable research effort has been conducted on enhancement of electrocatalytic activity of Ni electrodes.