Dopamine and octopamine in whole body extracts of the bulb mite

Summary Using high performance liquid chromatography with electrochemical detection, whole body extracts of the bulb mite,Rhizoglyphus echinopus (Fumouze and Robin), were found to contain the biogenic amines dopamine and octopamine at concentrations of 4.3±0.6 and 2.3±1.4 ng g^–1 wet weight, respectively. Adrenaline, noradrenaline, tyramine,N-methyldopamine,N-acetyldopamine, and 5-hydroxytryptamine, if present, were below the limits of detectability. This is the initial demonstration of the presence of octopamine in a mite species.     

Silicon carbide resonant tuning fork for microsensing applications in high temperature and high G shock environments

We present the fabrication and testing of a silicon carbide(SiC)balanced mass double-ended tuning fork that survives harsh environments without compromising the device strain sensitivity and resolution bandwidth.The device features a material stack that survives corrosive environments and enables high-temperature operation.To perform high-temperature testing,a specialized setup was constructed that allows the tuning fork to be characterized using traditional silicon electronics.The tuning fork has been operated at 600 ℃ in the presence of dry steam for short durations.This tuning fork has also been tested to 64 000 G using a hard-launch,soft-catch shock implemented with a light gas gun.However,the device still has a strain sensitivity of 66 Hz/με and strain resolution of 0.045 με in a 10 kHz bandwidth.As such,this balanced-mass double-ended tuning fork can be used to create a variety of different sensors including strain gauges,accelerometers,gyroscopes,and pressure transducers.Given the adaptable fabrication process flow,this device could be useful to micro-electro-mechanical systems(MEMS) designers creating sensors for a variety of different applications.     

Fabrication method and microstructural characteristics of coal-tar-pitch-based 2D carbon/carbon composites

The lignin-cellulosic texture of wood was used to produce two-dimensional (2D) carbon/carbon (C/C) composites using coal tar pitch. Ash content tests were conducted to select two samples among the different kinds of woods present in Iran, including walnut, white poplar, cherry, willow, buttonwood, apricots, berry, and blue wood. Walnut and white poplar with ash contents of 1.994wt% and 0.351wt%, respectively, were selected. The behavior of these woods during pyrolysis was investigated by differential thermal analysis (DTA) and thermo gravimetric (TG) analysis. The bulk density and open porosity were measured after carbonization and densification. The microstructural characteristics of samples were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. The results indicate that the density of both the walnut and white poplar is increased, and the open porosity is decreased with the increasing number of carbonization cycles. The XRD patterns of the wood charcoal change gradually with increasing pyrolysis temperature, possibly as a result of the ultra-structural changes in the charcoal or the presence of carbonized coal tar pitch in the composite's body.     

Synthesis and characterization of carbon-coated cobalt ferrite nanoparticles

Cobalt ferrite nanoparticles (CFNPs) were prepared via a reverse micelle method. The CFNPs were subsequently coated with carbon shells by means of thermal chemical vapor deposition (TCVD). In this process, acetylene gas (C₂H₂) was used as a carbon source and the coating was carried out for 1, 2, or 3 h at 750°C. The Ar/C₂H₂ ratio was 10:1. Heating during the TCVD process resulted in a NP core size that approached 30 nm; the thickness of the shell was less than 10 nm. The composition, structure, and morphology of the fabricated composites were characterized using X-ray diffraction, simultaneous thermal analysis, transmission electron microscopy, high-resolution transmission electron microscopy, and selected-area diffraction. A vibrating sample magnetometer was used to survey the samples’ magnetic properties. The deposited carbon shell substantially affected the growth and magnetic properties of the CFNPs. Micro-Raman spectroscopy was used to study the carbon coating and revealed that the deposited carbon comprised graphite, multiwalled carbon nanotubes, and diamond- like carbon. With an increase in coating time, the intensity ratio between the amorphous and ordered peaks in the Raman spectra decreased, which indicated an increase in crystallite size.     

Mechanisms and structures of crotonase superfamily enzymes – How nature controls enolate and oxyanion reactivity

Structural and mechanistic studies on the crotonase superfamily (CS) are reviewed with the aim of illustrating how a conserved structural platform can enable catalysis of a very wide range of reactions. Many CS reactions have precedent in the 'carbonyl' chemistry of organic synthesis; they include alkene hydration/isomerization, aryl-halide dehalogenation, (de)carboxylation, CoA ester and peptide hydrolysis, fragmentation of beta-diketones and C-C bond formation, cleavage and oxidation. CS enzymes possess a canonical fold formed from repeated betabetaalpha units that assemble into two approximately perpendicular beta-sheets surrounded by alpha-helices. CS enzymes often, although not exclusively, oligomerize as trimers or dimers of trimers. Two conserved backbone NH groups in CS active sites form an oxyanion 'hole' that can stabilize enolate/oxyanion intermediates. The range and efficiency of known CS-catalyzed reactions coupled to their common structural platforms suggest that CS variants may have widespread utility in biocatalysis.     

Synergistic effect of Al and Gd on enhancement of mechanical properties of magnesium alloys

The effect of Gd/Al ratio on the properties of as-cast Mg-Gd-Al-Zn alloys was investigated by changing the chemical composition from that of AZ61 to GZ61. At the ratio of 1, the Al2Gd phase becomes predominant and Mg17Al12 is hardly seen in the microstructure. As a potent inoculant, the Al2Gd phase resulted in intense grain refinement and enhancement of strength, ductility and toughness. For instance, the tensile strength and elongation to failure of Mg-3Gd-3Al-1Zn alloy were enhanced by ~4% and 180% compared with those of AZ61 alloy, respectively. However, at high Gd/Al ratios, the Al2Gd phase was replaced by (Mg,Al)3Gd and Mg5Gd phases and very large grain sizes were achieved, which led to poor tensile properties and the appearance of cleavage facets on the fracture surfaces. Therefore, it can be deduced that the presence of Gd and Al, in appropriate amounts to reach Gd/Al ratio of ~ 1, is required for the achievement of grain refinement, good ductility, high strength, and the appearance of ductile fracture surfaces in the Mg-Gd-Al-Zn system. Conclusively, the Mg-Gd-Al-Zn alloys can be considered as a new class of structural magnesium alloy and it is superior to both AZ (Mg-Al-Zn) and GZ (Mg-Gd-Zn) series of alloys.     

Rapid synthesis of MoSi2-Si3N4 nanocomposite via reaction milling of Si and Mo powder mixture

The nanocomposite of MoSi2-SiaN4 （molybdenum disilicide-silicon nitride） was synthesized by reaction milling of the Mo and Si powder mixture. Changing the processing parameters led to the formation of different products such as a- and B-MoSi2, SiaN4, Mo2N, and M05Si3 at various milling times. A thermodynamic appraisal showed that the milling of Moa2Siss powder mixture was associated with highly exothermic mechanically induced self-sustaining reaction （MSR） between Mo and Si. The MSR took place around 5 h of milling led to the formation of a-MoSi2 and the reaction between Si and N2 to produce Si3N4 under a nitrogen pressure of 1 MPa. By increasing the nitrogen pressure to 5 MPa, more heat is released, resulting in the dissociation of Si3N4 and the transformation of a-MoSi2 to β-MoSi2. Heat treatment was also performed on the milled samples and led to the formation of Mo2N and the transformation of a-MoSi2 to β-MoSi2 at the milling times of 10 and 40 h, respectively.     

Dopamine and octopamine in whole body extracts of the bulb mite

Using high performance liquid chromatography with electrochemical detection, whole body extracts of the bulb mite, Rhizoglyphus echinopus (Fumouze and Robin), were found to contain the biogenic amines dopamine and octopamine at concentrations of 4.3 +/- 0.6 and 2.3 +/- 1.4 ng g-1 wet weight, respectively. Adrenaline, noradrenaline, tyramine, N-methyldopamine, N-acetyldopamine, and 5-hydroxytryptamine, if present, were below the limits of detectability. This is the initial demonstration of the presence of octopamine in a mite species.     

Microstructural evolution and mechanical properties of friction stir-welded C71000 copper-nickel alloy and 304 austenitic stainless steel

Dissimilar joints comprised of copper-nickel and steel alloys are a challenge for manufacturers in modern industries, as these metals are not thermomechanically or chemically well matched. The present study investigated the effects of tool rotational speed and linear speed on the microstructure and mechanical properties of friction stir-welded C71000 copper-nickel and 340 stainless steel alloys using a tungsten carbide tool with a cylindrical pin. The results indicated that a rotational-to-linear speed ratio of 12.5 r/mm did not cause any macro defects, whereas some tunneling defects and longitudinal cracks were found at other ratios that were lower and higher. Furthermore, chromium carbide was formed on the grain boundaries of the 304 stainless steel near the shoulder zone and inside the joint zone, directing carbon and chromium penetration toward the grain boundaries. Tensile strength and elongation percentages were 84% and 65% of the corresponding values in the copper-nickel base metal, respectively.