Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

Innovative strategies for urban car-sharing systems and a simulator to assess their performance

In this paper, three innovative car-sharing systems for urban areas are proposed, based on fleets of individual intelligent vehicles with three service characteristics: instant access, open-ended reservations and one-way trips. These features provide high flexibility but create an uneven distribution of vehicles among stations. Therefore, relocation of vehicles must be performed. Three different system procedures are proposed: in the first system, relocations are performed by users; in the other two, vehicles relocate automatically, thanks to their automation. In the first two systems, vehicles are accessible only at stations, whereas in the third they are also accessible along roads. In order to provide transport managers with a tool to test systems in different realities, an object-oriented simulator is developed. The simulation provides outputs of system performance, in terms of user waiting times and system efficiency. The proposed systems are simulated for the city of Genoa, in Italy, and a comparative analysis is presented.     

Impact of ICT access on personal activity space and greenhouse gas production: evidence from Quebec City, Canada

This paper presents an approach to investigating the impact of information and communication technologies (ICTs) on travel behaviour and its environmental effects. The paper focuses on the spatial dispersion of out-of-home activities and travel (activity space) and greenhouse gas emissions (GHGs) at the level of the individual. An original method, combining spatial analysis in a geographic information system with advanced regression techniques, is proposed to explore these potentially complex relationships in the case of access to mobile phones and the internet, while taking into account the influence of socio-economics and built environment factors. The proposed methodology is tested using a 7-day activity-based survey in Quebec City in 2003?C2004, a juncture of particular interest because these ICTs had recently crossed the threshold of 40?% (mobile phone) and 60?% (home-based internet) penetration at the time. The study period also largely pre-dates the era of mobile internet access. Among other results, socio-demographic factors were found to significantly affect both ICT access and travel out-comes. The built environment, represented by neighbourhood typologies, also played an important role. However, it was found that after controlling for the self-selection effect, built environment and socio-demographics, those who had a mobile phone available produced 30?% more GHGs during the observed week than those who did not. This higher level of GHG pro-duction was accompanied by a 12?% higher measure of activity dispersion. On the other hand, having internet access at home was associated with lower GHGs (?19?%) and lesser activity dispersion (?25?%). Possibly, mobile phones enable individuals to cover more space and produce more emissions, while the internet provides opportunities to stay at home or avoid motorized travel thus reducing emissions. The estimated effects of having a mobile phone were not only negative but also larger in magnitude from the environmental point of view than those of fixed internet access. However, the results of this study also suggest that access to mobile phones and internet may have substantial and compensatory effects at the individual level that are undetected when using model structures that do not take into account that unobserved factors may influence both ICT choices and travel outcomes.     

Coastal management issues for the mouth of the river murray,South Australia

Abstract

This paper examines the management issues relating to the potential closure of the mouth of Australia's largest river. The importance of maintaining the river mouth is outlined, together with the implications of restricted river flow and the management response following the most recent closure of the mouth in 1981. One of the major unresolved issues is the question of responsibility and funding, which has arisen because of overlapping jurisdictions on either side of the river mouth and a lack of jurisdiction f or the mouth itself, which is an administrative boundary.     

Vehicle sensor data-based analysis on the driving style differences between operating indoor simulator and on-road instrumented vehicle

Abstract

Indoor simulator and on-road instrumented vehicle are the most popular ways to analyze driving behaviors by using collected Vehicle Sensor Data (VSD). However, for a same driver, the driving performance could be different in the real world and in the simulated world. Even though many studies have been conducted to discover the differences of driving behaviors in these two circumstances, little research has focused on analyzing the differences in driving style, which can provide more integrated knowledge of a driver from the natural structure, stimulus–response mechanism, of driving behaviors. Therefore, in this paper, the driving styles in both the real world and the simulated world are extracted by implementing the nonnegative matrix factorization method on the collected VSD data. Through this analysis, the driving style differences can be quantitatively described and discussed in detail. It is found that the drivers tend to be more unstable and sometimes aggressive when driving the simulator and the deviation in the perception of temporal gap in two circumstances is also discovered. The research findings are particularly valuable to calibrate the driving simulator and construct more reliable driving behavior models.     

Reduced dwell times resulting from train–platform improvements: the costs and benefits of improving passenger accessibility to metro trains

Abstract

This paper examines whether a dwell time reduction on a high-intensity metro service, as a result of a series of accessibility enhancements, can contribute to an increased level of service and accessible public transport for passengers together with a reduction in costs for the operator. Actual train operation data were collected by on-site observations and from London Underground Ltd. A simple simulation is built to represent the effect on the overall cycle times of trains if certain parameters (e.g. dwell time) are changed. Four models are developed, concerning: (1) step height between train and platform, (2) an assumption of passenger service time to be no longer than 20 s, (3) door width and (4) the combination of step height and door width. From the application of the models it appears that the fourth model provides the highest reduction in dwell time and diminishes the overall cycle times of trains. However, it is the most expensive to implement as it requires work to raise platforms and the purchase of new rolling stock.     

What determines commute time choices? A structural equation modelling approach

Abstract

Many researchers have been attracted by the phenomenon of constant travel time, and the time spent on travel has been an important indicator of understanding travellers’ behaviours. This paper is based on a survey conducted in a university in London which includes both objective and subjective variables in relation to commute time and some demographic characteristics. Two conceptual structural models are examined in order to explore the factors determining travellers’ choices. Results of the analysis reveal some interesting relationships: (1) a positive relationship between age and commute time; (2) females are more likely to read or listen to music during their journeys, and their ideal commute time (ICT) and current commute time (CCT) generally tend to be longer; (3) academic staff tend to have the habit of working during their commute, administrative staff tend to commute longer while students tend to spend a shorter time commuting; (4) normally, a habit while travelling is significantly associated with CCT; those with a habit of reading or working during their commute journey tend to have longer commute times and (5) the relationship between CCT and commuters’ ICT and tolerable commute time is positive; both hypothesised causal relationships are significant so that a loop is formed between subjective and objective variables, and thus a dynamic modelling process could be envisaged as temporal sequences of those variables.     

A micro-level approach to measuring the accessibility of footways for wheelchair users using the Capability Model

There are a growing number of people with mobility impairments who use wheelchairs to get around the built environment. This number is likely to increase in the future due to an increasingly ageing population combined with advances in medical technology which help to overcome some of the barriers to access that have hitherto prevented people from leading as full a life as they would have liked. Footways form an integral part of the transport network and therefore it is essential they can be accessed by all people. Currently, however, there is no well-defined method to measure the accessibility of footways for wheelchair users. One aspect of a footway is the crossfall – the transverse gradient designed to facilitate surface water drainage – which adds to a wheelchair user's difficulty when progressing along the footway. This paper first reviews previous research on measuring the effect of crossfalls on wheelchair accessibility, highlighting the need for a new approach. It then proposes the Capability Model as a starting point for this new approach. The model is updated and populated with an initial capability set chosen to measure footway accessibility across footways with three different crossfall gradients (0%, 2.5% and 4%). The focus is on the physical work provided by the user to the wheelchair in order to keep it travelling in a straight line. It is shown that in order to travel in a straight line when a footway is flat only a single principal capability is required: the ability to produce sufficient force over the required distance to overcome the inertia and rolling resistance and keep the wheelchair moving at the chosen velocity. When a positive crossfall gradient is introduced a second capability is required: the ability to apply different levels of force to the left and right sides of the wheelchair. It is concluded that it is possible to measure these two capabilities and these provide a good insight into the effect of crossfalls on footway accessibility for wheelchair users.     

Can we really measure the impact of port governance reform?

Approaches by governments to reforming the way in which ports are governed are critical to how ports operate and fulfil their roles, and much research is devoted to investigating the impact of such reform. Yet, although the challenges of such research are noted, little attention is devoted to questioning whether measuring such impact is actually possible. We argue consideration of this question is fundamentally important for policy makers and researchers. Specifically, if uncertainty exists regarding whether we have measured the impact of the reform, how can we research its effect or justify its introduction? Conversely, a more conscious consideration of whether we can really measure the impact of port governance reform arguably means a more effective contextualization and rationalization of both policy and research. In this polemical paper, we critically consider three salient areas in relation to whether we can really measure the impact of port governance reform: ‘key terms and their ambiguity’, ‘aspects of time and geography’ and ‘issues of methods and context’. We summarize the key issues and offer suggestions for policy makers and researchers to approach them in an aim to both help measure the impact of port governance reform and also aid future policy development.