A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

Solubility of actinide surrogates in nuclear glasses

This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium L_III XANES spectroscopy showed that the Ce³⁺/Ce_total ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 °C. Cerium L_III XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce³⁺ is shown to be more soluble than Ce⁴⁺ in this borosilicate glass.     

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.     

Structure of metal site in Cd-substituted His117Gly mutant of azurin with and without addition of imidazole derivatives

The present work uses 111mCd-perturbed angular correlations of gamma-rays (PAC) to investigate the structure of the metal site of the His117Gly mutant of Pseudomonas aeruginosa azurin in aqueous solution and the effect on the structure upon addition of the following exogenous ligands: imidazole, 4-methyl imidazole, 1-methyl imidazole, 2-methyl imidazole and histidine. The nuclear quadrupole interaction of cadmium bound to the mutant without addition of exogenous ligands shows a strong pH dependence with three different nuclear quadrupole interactions consistent with two pKa values at about 7.2 and 8.6 at 2 degrees C. Addition of the imidazole derivatives resulted in a significant change in the PAC spectrum showing that they coordinate. This is in accordance with observations by EPR for the same mutant with copper at the metal site [den Blaauwen, T. & Canters, G. W. (1993) J. Am. Chem. Soc. 115, 1121-1129]. However, whereas EPR and ultraviolet/visual absorption show that the characteristics of the wild-type copper protein are regained by addition of the imidazole derivatives with the exception of the possible bidentates (histidine and histamine), the comparison of the PAC results to model calculations shows that the cadmium ion must be fourfold coordinated in most cases, probably binding an additional water or hydroxide ligand. A fourfold coordination is in contrast to cadmium-substituted wild-type azurin where PAC data inferred a threefold coordination by a Cys and two His residues [Danielsen, E. Bauer, R., Hemmingsen, L., Andersen. M., Bjerrum, M. J., Butz, T., Tr?ger, W., Canters, G. W., Hoitink, C. W. G., Karlsson, G., Hansson, O. & Messerschmidt, A. (1995) J. Biol. Chem. 270, 573-580]     

Hardware control of an active magnetic shield

The presented hardware controller controls the current in an active shield consisting of a number of compensation coils at well-chosen positions. In combination with a converter and the active shield, the controller reduces the fundamental component of the magnetic stray field of an induction heater by generating a magnetic counter field in a defined target area. The controller uses two input signals (from two magnetic field sensors) and generates amplitude and phase information for the converter. Based on this information, the latter produces the compensation current wave that is sent to the compensation coils to minimise the magnetic field. The frequency range of the controller is 1-100 kHz. Its dynamic behaviour is explained in theory and validated by experiments     

In vitro triggering of somatic mutation in human naive B cells

During T cell-dependent immune response, germinal center B cells accumulate somatic mutations in their Ig V(D)J genes and give rise to affinity-selected B cells. We tested several culture conditions for triggering somatic mutation in human tonsillar naive slgD+CD23+ cells after cross-linking their membrane Igs. CD40 activation, in the presence of exogenous cytokines (IL-2, IL-4, and IL-10), induced proliferation and isotype switch without somatic mutation. In contrast, after coculture with anti-CD3-activated cloned T cells, somatic mutation accumulated in a fraction of naive B cells. Mutations included shared as well as independent events in clonally related sequences, allowing reconstitution of genealogic trees generated in vitro. Naive tonsillar B cells sorted for slgD expression can be induced to mutate their Ig V(H) gene upon coculture with activated T cells, thereby providing a model to study somatic hypermutation in vitro.     

The success of locoregional, low-dose recombinant interleukin-2 therapy in tumor-bearing mice is dependent on the time of rIL-2 administration

The most common chromosomal aberrations in myelodysplastic syndromes (MDS) are complete or partial loss of chromosomes 5 and 7, and trisomy 8. To identify genes important in the pathogenesis of this disease that could be associated with these gross chromosomal defects, we have employed the differential display PCR (DDPCR) procedure developed by Liang and Pardee. This method allows simultaneous comparison of several cDNA sources for the presence of differentially expressed genes. Polymorphonuclear cells (PMNs) from two MDS patients, containing a 5q deletion or a trisomy 8, and three healthy controls were used. Initial screening resulted in the identification of five and three partial cDNA sequences, respectively that were either differentially expressed in both patient samples or in individual patients, as compared with the controls. The authenticity of aberrant expression was verified by reanalyzing the same primer combinations on newly prepared cDNA. Differential expression of the three remaining fragments was subsequently checked on a larger panel of MDS patients, using amplicon-specific primer sets. These were obtained by cloning and sequencing of the fragments. For one partial cDNA (DC3), the original expression pattern, i.e., decreased expression in individual MDS patients, was confirmed. These results demonstrate the utility of the DDPCR procedure to isolate differentially expressed sequences in primary patient samples where the availability of cells is a limiting factor.     

Mechanism of paper wet strength development by polycarboxylic acids with different molecular weight and glutaraldehyde/poly(vinyl alcohol)

In our previous research, we found that crosslinking paper using poly(carboxylic acid)s with different molecular weight or using the combination of glutaraldehyde and poly(vinyl alcohol) (PVA) significantly improved the wet strength of the paper. In this research, we studied the mechanism of paper wet strength development using crosslinking systems with different molecular weight by measuring scanning electron microscopic (SEM) images, wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. The paper crosslinked by a high‐molecular weight (MW) poly(carboxylic acid) shows more swelling by water than that crosslinked by a low‐MW polycarboxylic acid in the SEM micrographs even though both treated paper samples have similar wet strength. Thus, the data suggest that high‐MW poly(carboxylic acid)s promote the formation of interfiber crosslinking. Crosslinking paper by glutaraldehyde, a crosslinking agent of small molecular size, improves wet strength and reduces flexibility and swellability of paper because of the formation of intrafiber crosslinking. Combining glutaraldehyde with PVA as a coreactant increases wet strength and also retains flexibility and swellability of the treated paper because of the formation of interfiber crosslinking. The hypothesis that PVA reacts with glutaraldehyde to form a polymeric pentanedialated‐PVA crosslinking system and promotes the formation of interfiber crosslinking on the paper is supported by the data of wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 277–284, 2006     

Balanced corpus of contemporary written Japanese

The balanced corpus of contemporary written Japanese (BCCWJ) is Japan’s first 100 million words balanced corpus. It consists of three subcorpora (publication subcorpus, library subcorpus, and special-purpose subcorpus) and covers a wide range of text registers including books in general, magazines, newspapers, governmental white papers, best-selling books, an internet bulletin-board, a blog, school textbooks, minutes of the national diet, publicity newsletters of local governments, laws, and poetry verses. A random sampling technique is utilized whenever possible in order to maximize the representativeness of the corpus. The corpus is annotated in terms of dual POS analysis, document structure, and bibliographical information. The BCCWJ is currently accessible in three different ways including Chunagon a web-based interface to the dual POS analysis data. Lastly, results of some pilot evaluation of the corpus with respect to the textual diversity are reported. The analyses include POS distribution, word-class distribution, entropy of orthography, sentence length, and variation of the adjective predicate. High textual diversity is observed in all these analyses.     

Uniqueness and multiplicity criteria for an nth order chemical reaction

New and very strong criteria are presented for a priori prediction of the conditions for which the steady-state lumped parameter model of an nth order chemical reaction (n ≥ 0) in an adiabatic CSTR has either a unique or multiple solutions. The criteria show that the higher the order of the reaction the smaller is the region in the parameters space for which multiplicity can occur.New uniqueness and multiplicity criteria are developed also for an nth order reaction in a porous catalyst using a model, which accounts for intraparticle concentration gradients, while assuming a uniform intraparticle temperature different from the ambient one. The region in the parameters space for which steady state multiplicity can occur for this model is smaller than that for a corresponding lumped model, which ignores the intraparticle concentration gradients.