Monte Carlo simulation of hydrogen absorption in palladium and palladium–silver alloys

A modified Monte Carlo (MC) simulation was performed to investigate the hydrogen absorption behavior in Pd and Pd–Ag alloys of the composition Pd_xAg_1−x (x=0.7–0.8) under H₂ pressure (0.1 MPa) at different temperatures. The present method employed can consider the dissociative adsorption of hydrogen molecule and the subsequent absorption of hydrogen atom by formalizing the relationship between the pressure of hydrogen molecule and hydrogen atom. The potential parameters were determined to reproduce the solution enthalpy of hydrogen in pure metals. The results are in good agreement with experimental findings as well as previous theoretical studies. We confirmed that our method is useful to simulate the absorption of hydrogen in metals and alloys.     

Preparation of micrometer‐sized,monodisperse, magnetic polymer particles

Micrometer‐sized, monodisperse, magnetic composite particles were prepared by heating micrometer‐sized, monodisperse, hollow polystyrene/polydivinylbenzene composite polymer particles at 200°C for 4 h (particles had been dipped in pentacarbonyliron) and then washed in 12 N HCl and water. The hollow polymer particles were produced by seeded polymerization by the dynamic swelling method that was proposed by authors. The magnetic composite particles contained Fe₃O₄, the content of which was 49% based on total weight, and were attracted easily in water by a 1650 G magnet. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 428–433, 2003     

A study of suppression of vapor explosions by adding inversely soluble polymers

The mechanism of the suppression of vapor explosions by adding inversely soluble polymers in water is studied. Vapor explosion experiments and quench experiment are conducted using a silver test piece. Polymetric solution (polyethylene oxide), of concentrations from 0 to 500 wppm, whose normalized viscosity (by water) varies from 1.00 to 2.00, is used. No vapor explosion is observed in the aqueous polymer solution at a concentration higher than 200 wppm. Quench experiments using the silver test piece submerged in the polymer solution and water are performed in order to examine the stability of film boiling. The suppression of the vapor film collapse is attributed to the precipitation of polyethylene as a gel around the vapor film. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(4): 297–306, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10037     

High-performance carbon counter electrode for dye-sensitized solar cells

Here, we reported that a new carbon electrode prepared with an activated carbon was superior to a Pt sputtered electrode as the counter electrode of dye-sensitized solar cells. The photovoltaic performance was largely influenced by the roughness factor of carbon electrode. The open-circuit voltage increased by about 60 mV using the carbon counter electrode compared to the Pt counter electrode because of positive shift of the formal potential for I₃⁻/I⁻ couple.     

碳钢高温变形后的静态软化行为

在形变温度为1133K、形变速率为2×10~(-3)s~(-1)的试验条件下,采用两段加载拉伸试验方法研究了0.4%C-1.5%Mn钢高温变形后的静态软化行为.调查了由两次加载拉伸变形时的屈服应力求得的静态软化率以及相对峰值应力比和峰值应变比随等温保持时间的变化.详细讨论了动态回复组织和动态再结晶组织对高温变形后的静态软化过程的影响.     

The combined method: a novel access technique for fetal endoscopic surgery

BACKGROUND/PURPOSE: To develop practical and less invasive techniques for fetal endoscopic surgery, new methods of lifting the uterine wall to allow fetal surgery without maternal laparotomy were developed and assessed. METHODS: Fetal endoscopic surgical procedures, including tracheostomy and umbilical vascular cannulation, were performed using one of the three methods to enter the uterus without maternal laparotomy in pregnant goats (n = 6; 105 to 115 days' gestation): (1) direct uterine lifting with an air-cushion device; (2) indirect uterine lifting, in which the uterine wall was fixed to the maternal abdominal wall using balloon tip ports inserted percutaneously by Seldinger's method, then the maternal abdomen was lifted mechanically; and (3) combined method, in which low pressure CO2 (5 mm Hg for initial inflation and 2 mm Hg for maintenance) was insufflated into the uterus in addition to the indirect uterine lifting cited above. RESULTS: The direct uterine lifting caused massive injury of myometrium and uterine membranes. The creation of intrauterine space and the protection of the membranes were not accomplished effectively by the indirect uterine lifting only. The combined method provided the adequate intrauterine space and excellent endoscopic visibility for completion of the endoscopic procedures with minimal uterine injury. CONCLUSION: The fetal endoscopic surgery may be accomplished simply and safely by the combined method, a novel technique of uterine lifting to allow fetal surgery without maternal laparotomy.     

Poly(butylene succinate)/poly(vinyl phenol) blends. Part 1. Miscibility and crystallization

Miscibility has been investigated in blends of poly(butylene succinate) (PBSU) and poly(vinyl phenol) (PVPh) by differential scanning calorimetry in this work. PBSU is miscible with PVPh as shown by the existence of single composition dependent glass transition temperature over the entire composition range. In addition, the polymer–polymer interaction parameter, obtained from the melting depression of PBSU using the Nishi–Wang equation, is composition dependent, and its value is always negative. This indicates that PBSU/PVPh blends are thermodynamically miscible in the melt. Preliminary morphology study of PBSU/PVPh blends was also studied by optical microscopy (OM). OM experiments show the spherulites of PBSU become larger with the PVPh content, indicative of a decrease in the nucleation density, and the coarseness of PBSU spherulites increases too with increasing the PVPh content in the blends.     

CUDA programs for the GPU computing of the Swendsen–Wang multi-cluster spin flip algorithm: 2D and 3D Ising,Potts, and XY models

We present sample CUDA programs for the GPU computing of the Swendsen–Wang multi-cluster spin flip algorithm. We deal with the classical spin models; the Ising model, the q$q$-state Potts model, and the classical XY model. As for the lattice, both the 2D (square) lattice and the 3D (simple cubic) lattice are treated. We already reported the idea of the GPU implementation for 2D models (Komura and Okabe, 2012). We here explain the details of sample programs, and discuss the performance of the present GPU implementation for the 3D Ising and XY models. We also show the calculated results of the moment ratio for these models, and discuss phase transitions.     

Dynamic compensation by fusing a high-speed actuator and high-speed visual feedback with its application to fast peg-and-hole alignment

This paper presents a dynamic compensation concept to grapple with the dynamic defects of a traditional robot arm, especially while performing high-speed endpoint regulations. The proposed high-speed dynamic compensation concept offers a new point of view for cooperating with a traditional manipulator to realize highly dexterous performance of manipulations. The concept is realized through adoption of a high-speed light-weight actuator as well as endpoint closed loop configured high-speed cameras. The dynamic compensation is analyzed experimentally with 1000 Hz visual feedback and a high-speed finger for a robot arm in the case of one degree of freedom. The advantage of the proposed approach is that the modeling for the robot system’s dynamics is not needed, whereas it is necessary and trivial in order to realize high-speed regulations by traditional approaches. Thus, the control issue becomes easier with the proposed approach. As an application for this concept, fast peg-and-hole alignment with large position and attitude uncertainty is studied. The alignment algorithm is based on a visual compliance strategy. Alignment experiments show that with the proposed concept of dynamic compensation as well as visual compliant motion control, robust and fast convergence was realized for most cases.