Strength of short concrete columns confined with CFRP sheets

The confinement of concrete columns provided by carbon fibre reinforced plastic (CFRP) sheets can be an efficient technique for their structural strengthening. The principal advantages of this technique are the high strength-to-weight ratio, good fatigue properties, non-corroding characteristics of the CFRP, and the facility of its application. An experimental research program, that included tests on 54 short column specimens, was carried out to investigate the gain in strength and ductility of concrete columns externally confined by CFRP wrapping. The variables studied were the column cross section shape (circular, square and rectangular) and the amount of confinement expressed in the number of CFRP sheet layers applied to the models (one or two layers). On the basis of the obtained results, equations were proposed to calculate the confined concrete strength and the ultimate confined concrete strain as a function of the confining lateral stress for each of the cross section geometry used, circular, square and rectangular. The estimations given by these equations and by those from formulas encountered in the literature were compared with the experimental ones and general conclusions were, finally, drawn.

---

Résumé Le confinement de colonnes de béton assuré par des feuilles de plastique renforcé par des fibres de carbone (CFRP) peut être une technique efficace pour leur comportement structural. Les principaux avantages de cette technique sont la haute relation résistance-poids, des bonnes propriétés de fatigue, les caractéristiques non-corrosives du CFRP, et la facilité de leur application. Un programme expérimental comprenant des essais sur 54 colonnes courtes fut entrepris en vue de déterminer le gain de résistance et de ductilité de colonnes en béton confinées sur le plan externe en les recouvrant de feuilles de CFRP. Les variables étudiées étaient la forme de la section transversale (circulaire, carrée et rectangulaire), et la quantité de renforcement, mesurée par le nombre de feuilles de CFRP appliquées aux modèles (une ou deux couches). En prenant comme base les résultats obtenus, des équations ont été proposées pour calculer la résistance du béton confiné et sa déformation spécifique ultime en fonction de la contrainte latérale de confinement, pour chaque forme de section transversale utilisée, circulaire, carrée et rectangulaire. Les estimations données par ces équations et celles données par des formules trouvées dans la litérature ont été comparées avec les résultats expérimentaux et des conclusions générales ont finalement été établies.

     

The antioxidant activity of amino acids in two vegetable oils

Of 27 amino acids studied, most had some antioxidant activity when added in aqueous solution to either safflower oil or a mixture of sunflower and cottonseed oil (active oxygen and storage methods). Cysteine-HCl, glutamic acid-HCl (in the mixture), and glutamic acid-HCl (in safflower oil) behaved as prooxidants. When added as a solid, most amino acids were ineffective. The protection factors of these amino acids were less than 1.3 in safflower oil with methionine, proline, lysine and cysteine providing the highest activ-ity. In the oil mixture (which had a higher metal content) lysine, arginine, glutamic acid, methionine, and hydroxyproline were anti-oxidant with protection factors of up to 1.85. Chelation of metals by amino acids was presumably responsible for the antioxidant activity. The increase in cysteine concentration up to 1% has more than doubled the protection factor in Bint oil (compared with the 0.01% level), whereas with some other amino acids the increase was either small or slight.     

Alkali release characteristics of blended cements

This paper presents results of an experimental program conducted to investigate the capacity of hydration products of different cementing materials to retain “bound” alkalis when the alkalinity of the surrounding solution drops. The study covered paste samples containing high-alkali Portland cement and various levels of silica fume and/or fly ash. The results showed that the ability of the hydration products of cement-fly ash systems to bind alkalis is a function of the CaO content of the fly ash, the binding increasing as the calcium content decreases. High-alkali fly ashes (Na₂O_e > 5.0% and CaO in the range of 15% to 20%) showed considerable amounts of alkali contributed to the test solutions. Silica fume does not have a high capacity to retain alkalis in its hydration products; however, ternary blends containing silica fume and fly ash have excellent capacity to bind and retain alkalis.     

Recognizing arabic handwritten characters using deep learning and genetic algorithms

Automated techniques for Arabic content recognition are at a beginning period contrasted with their partners for the Latin and Chinese contents recognition. There is a bulk of handwritten Arabic archives available in libraries, data centers, historical centers, and workplaces. Digitization of these documents facilitates (1) to preserve and transfer the country’s history electronically, (2) to save the physical storage space, (3) to proper handling of the documents, and (4) to enhance the retrieval of information through the Internet and other mediums. Arabic handwritten character recognition (AHCR) systems face several challenges including the unlimited variations in human handwriting and the leakage of large and public databases. In the current study, the segmentation and recognition phases are addressed. The text segmentation challenges and a set of solutions for each challenge are presented. The convolutional neural network (CNN), deep learning approach, is used in the recognition phase. The usage of CNN leads to significant improvements across different machine learning classification algorithms. It facilitates the automatic feature extraction of images. 14 different native CNN architectures are proposed after a set of try-and-error trials. They are trained and tested on the HMBD database that contains 54,115 of the handwritten Arabic characters. Experiments are performed on the native CNN architectures and the best-reported testing accuracy is 91.96%. A transfer learning (TF) and genetic algorithm (GA) approach named “HMB-AHCR-DLGA” is suggested to optimize the training parameters and hyperparameters in the recognition phase. The pre-trained CNN models (VGG16, VGG19, and MobileNetV2) are used in the later approach. Five optimization experiments are performed and the best combinations are reported. The highest reported testing accuracy is 92.88%.

     

Effect of electron irradiation on alternating current electrical properties of gelatin – cadmium sulfide nano-composite films

Gelatin was doped with 1 %, 3 %, 5 % and 10 % cadmium sulfide nanoparticles in weight concentrations forming the gelatin-cadmium sulfide nanocomposites and irradiated by various electron beam doses equals 50 kGy, 75 kGy, 100 kGy, and 150 kGy using 3 MeV – 3 mA electron accelerator. The applied alternating current electrical field frequency ranging from 70 Hz to 5 MHz is what caused the fluctuation in dielectric properties and alternating current electrical conductivity of these nanocomposites. The results showed that the films of 1 %, 3 %, 5 %, and 10 % for blank (nanocomposite film without electron beam irradiation) nanocomposites had the highest dielectric parameters (έ, ϵ′′, tan δ) at 0.5 kHz with values of (0.696, 0.0233, 0.034), (0.533, 0.0114, 0.0215), (0.402, 0.001196, 0.003), and (0.459, 0.00418, 0.0091), respectively. However, the lowest dielectric parameters were (0.645, 0.00618, 0.0066), (0.523, 0.00165, 0.0215), (0.417, 0.00035, 0.0008), and (0.455, 0.00066, 0.0015) at 5 MHz, respectively. The highest conductivity values for blank nanocomposites of 1 %, 3 %, 5 %, and 10 % were 1.79×10⁻⁴ S/m, 1.45×10⁻⁴ S/m, 1.16×10⁻⁴ S/m, 1.27×10⁻⁴ S/m at 5 MHz, and the lowest values were 1.92×10⁻⁸ S/m, 1.49×10⁻⁸ S/m, 1.13×10⁻⁸ S/m, 1.26×10⁻⁸ S/m at 0.5 kHz, respectively. For irradiated nanocomposites at 5 MHz, the dielectric constant order for 1 % was 100 kGy, 150 kGy, 50 kGy, and 75 kGy with values 0.63, 0.537, 0.532, and 0.523, respectively. For 10 % weight concentration, the order was 50 kGy, 100 kGy, 150 kGy, and 75 kGy with values 0.515, 0.477, 0.47, and 0.437, respectively. Otherwise the dielectric constant order for 3 % and 5 % was 100 kGy, 75 kGy, 150 kGy, and 50 kGy. The highest dielectric properties and conductivity values for blank and irradiated nanocomposites were observed at 100 kGy for 1 %, 3 %, and 5 %.     

Groundwater Utilization and Management in the State of Kuwait

Abstract

The main brackish groundwater resources in the State of Kuwait are the groundwater located in the Kuwait Group and the Dammam limestone aquifers. Most of the groundwater used in the State of Kuwait is for irrigation, some part of it is used for domestic purposes and for small scale industries. Since rainfall is seasonal and is less than the annual evaporation, the recharge from rainfall is negligible. Water levels in both the aquifers are highly affected by the pumping rate from each well. The groundwater is extracted heavily resulting in decline of water levels and the deterioration of groundwater quality though there is underflow from Saudi Arabia. Improvement of the groundwater management is essential for maintaining long-term productivity of the aquifers in the State of Kuwait.     

Shear Strength of Pre-Cast Prestressed Composite Beams with Discontinuous Connections Made of Cast-in-Place Shear Keys

This work investigates the horizontal and web shear resistance of continuous and discontinuous slab-web connections in pre-cast pre-tensioned bridge systems. The beams were full scale pre-cast pre-tensioned girders and the slabs were made of ordinary reinforced concrete either cast in place, for continuous connections, or pre-cast slabs with holes spaced at 312.5 mm to be set in place, for discontinuous connections. The main variables were the connection type (continuous or discontinuous) and the ratio of the connection steel. From the test results and the numerical analysis performed, a modified stress field for the inclined compressive strut in the truss model is proposed for continuous and discontinuous slab-web connections. The analytical results obtained with the proposed modified stress field in the truss model compared well with the tests results. Design procedures for these types of elements are also discussed.     

Nano-structured zinc oxide–cotton fibers: synthesis, characterization and applications

Zinc oxide nanoparticles were prepared and subsequently deposited onto the surface of the cotton fiber by ultrasonic irradiation. The optical, structure and morphology of the coated and un-coated cotton were examined by UV, fourier transform infrared spectroscopy, X-ray diffraction analysis (XRD) and scanning electron microscope (SEM)/Energy Dispersive X-ray analysis. XRD analysis revealed the presence of the crystalline metal oxide of hexagonal phase with an average crystallite size of 12 nm. These nanoparticles are probably physically adsorbed onto the cotton fiber surface. SEM analysis showed a distribution of ZnO nanorod assemblies of various diameters and lengths physically adsorbed onto the cotton fiber surface may take place. The ZnO-cotton fiber nano-composite were tested against Escherichia coli (gram negative) and Staphylococcus aureus (gram positive) cultures, and showed a significant antimicrobial activity.     

Wells turbine for wave energy conversion: a review

In the past 20 years, the use of wave energy systems has significantly increased, generally depending on the oscillating water column concept. Wells turbine is one of the most efficient oscillating water column technologies. This article provides an updated and a comprehensive account of the state‐of‐the‐art research on Wells turbine. Hence, it draws a roadmap for the contemporary challenges, which may hinder future reliance on such systems in the renewable energy sector. In particular, the article is concerned with the research directions and methodologies, which aim at enhancing the performance and efficiency of Wells turbine. The article also provides a thorough discussion of the use of CFD for performance modeling and design optimization of Wells turbine. It is found that a numerical model using the CFD code can be employed successfully to calculate the performance characteristics of W‐T as well as other experimental and analytical methods. The increase of research papers about CFD, especially in the last 5 years, indicates that there is a trend that considerably depends on the CFD method. Copyright © 2016 John Wiley & Sons, Ltd.     

Characteristics and 3D formation of PVA and PEO electrospun nanofibers with embedded urea

The behavior of electrospun polyvinyl alcohol (PVA) and polyethylene oxide (PEO) nanofibers embedded with urea is studied as a function of various process parameters. Our results show that three‐dimensional nanofiber networks can be obtained when high concentrations of urea in the solution are used during electrospinning. The nanofibers are characterized using both scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR). The stability of the nanofiber as a function of electric field has also been studied. The successful formation of three‐dimensional nanofiber networks can open new trends toward applications in fertilizers containing nanofibers in the nanoagricultural field. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39840.