Analysis and comparison of machine learning classifiers and deep neural networks techniques for recognition of Farsi handwritten digits

The Journal of Supercomputing - Handwriting recognition remains a challenge in the machine vision field, especially in optical character recognition (OCR). The OCR has various applications such as...     

Ignite-GPU: a GPU-enabled in-memory computing architecture on clusters

The Journal of Supercomputing - During recent years, big data explosion and the increase in main memory capacity, on the one hand, and the need for faster data processing, on the other hand, have...     

A potential trackable bone filler: Preparation and characterization

This study reported the synthesis of fluorescent hydroxyapatite/alginate/carbon quantum dots (HA/Alg/CQDs) nanocomposites via the co-precipitation technique. The N-doped CQDs as a new class of fluorescent materials were prepared by the citric acid pyrolysis method, with an average size around 4 nm. Physical, chemical, and optical properties of the synthesized nanocomposites were investigated by X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), field-emission scanning electron microscopy (FESEM), UV–visible spectroscopy, and photoluminescence (PL) spectroscopy, respectively. The PL spectroscopy data verified the favorable in vitro luminescent emission of the HA/Alg/CQDs nanocomposites in comparison with HA/Alg and HA samples. The XRD patterns of the prepared samples confirmed the formation of crystalline HA in all composites, possessing a Ca/P ratio around 1.5 as obtained by EDX elemental analysis. The FESEM analysis exhibited HA nanoplates that homogeneously distributed throughout the alginate matrix. Therefore, the synthesized nanocomposites could be regarded as potential trackable drug carriers for hard tissue engineering applications.     

New block copolymers II. Synthesis and characterization of an ABA-type block copolymer

A new regular ABA-type triblock copolymer has been synthesized by polycondensation of the acid chloride of carboxy-terminated butadience-acrylonitrile rubber (CTBN) with hydroxyterminated polyethylene isophthalate (PEI) oligomer. This block copolymer was characterized by elemental (nitrogen) analysis, vapor pressure osmometry, viscometry, and IR and NMR spectroscopy. Quantitative estimation of block segments has been carried out by measuring the area under peaks assigned to various protons in the NMR spectrum of the polymer. NMR spectral analysis has been found to agree well with the nitrogen analysis of the polymer. The solubility and solution viscosity behavior of the polymer has also been studied.     

Modification of glassy carbon electrode with multi-walled carbon nanotubes and iron(III)-porphyrin film: Application to chlorate, bromate and iodate detection

In this study, multi-wall carbon nanotubes (MWCTs) is evaluated as a transducer, stabilizer and immobilization matrix for the construction of amperometric sensor based on iron-porphyrin. 5,10,15,20-Tetraphenyl-21H,23H-porphine iron(III) chloride (Fe(III)P) adsorbed on MWCNTs immobilized on the surface of glassy carbon electrode. Cyclic voltammograms of the Fe(III)P-incorporated-MWCNTs indicate a pair of well-defined and nearly reversible redox couple with surface confined characteristics at wide pH range (2-12). The surface coverage (Γ) and charge transfer rate constant (k_s) of Fe(III)P immobilized on MWCNTs were 7.68 × 10⁻⁹ mol cm⁻² and 1.8 s⁻¹, respectively, indicating high loading ability of MWCNTs for Fe(III)P and great facilitation of the electron transfer between Fe(III)P and carbon nanotubes immobilized on the electrode surface. Modified electrodes exhibit excellent electrocatalytic activity toward reduction of ClO₃⁻, IO₃⁻ and BrO₃⁻ in acidic solutions. The catalytic rate constants for catalytic reduction of bromate, chlorate and iodate were 6.8 × 10³, 7.4 × 10³ and 4.8 × 10² M⁻¹ s⁻¹, respectively. The hydrodynamic amperometry of rotating-modified electrode at constant potential versus reference electrode was used for detection of bromate, chlorate and iodate. The detection limit, linear calibration range and sensitivity for chlorate, bromate and iodate detections were 0.5 μM, 2 μM to 1 mM, 8.4 nA/μM, 0.6 μM, 2 μM to 0.15 mM, 11 nA/μM, and 2.5 μM, 10 μM to 4 mM and 1.5 nA/μM, respectively. Excellent electrochemical reversibility of the redox couple, good reproducibility, high stability, low detection limit, long life time, fast amperometric response time, wide linear concentration range, technical simplicity and possibility of rapid preparation are great advantages of this sensor. The obtained results show promising practical application of the Fe(III)P-MWCNTs-modified electrode as an amperometric sensor for chlorate, iodate and bromate detections.     

Noisy metrology: a saturable lower bound on quantum Fisher information

Quantum Information Processing - We present a general problem of quantum entanglement quantified by von Neumann entropy for N-level atomic system. Time evolution of state vector of the entire...     

Flow resistance in a compound gravel-bed bend

In this paper, the effect of a gravel-bed in a compound bend (similar to sinusoidal top view) of a natural river (Zayandehrud River flowing through Isfahan, Iran) has been investigated for flow resistance analysis, measuring the velocity with a micro current meter. The data were analysed and the following observations were made. In a compound bend, the law of the wall can be valid for up to 66% of the flow depth from the bed. The parabolic law is the most effective method for the determination of shear velocity. Based on the existing criteria for verifying the equilibrium boundary layer, the flow cannot be in equilibrium. The shear stress distribution and the sediment transport parameters have considerable influence on resistance to flow. Froude number and the flow depth relative to the representative gravel size have little effect on the flow resistance estimation.     

A new FMEA method by integrating fuzzy belief structure and TOPSIS to improve risk evaluation process

Failure mode and effect analysis (FMEA) model is a technique used to evaluate the risk. This paper aimed to propose a new FMEA model combining technique for order of preference by similarity to ideal solution (TOPSIS) and belief structure to overcome the shortcomings of the traditional index of FMEA. In this paper, the fuzzy belief TOPSIS method is combined with FMEA to introduce a belief structure FMEA to describe the expert knowledge by a number of linguists as a grammatical phenomenon. Moreover, the weights of components in FMEA index can be different from each other. Therefore, the flexibility of assigning weight to each factor in this method is more compatible to the real decision-making situation. In other word, TOPSIS method is applied to determine the preference of alternatives versus risk criteria. Using linguistic terms in the fuzzy belief approach, the risk factors described a more meaningful value and decision-makers’ judgment is assigned with belief degrees through evaluation of factors. Finally, a numerical case study about the preference of cause failures of steel production process is provided to illustrate the process of proposed method, and then result and discussion is performed for each case.     

Perfect state transfer via quantum probability theory

The transfer of quantum states plays an important role in quantum information processing. In fact, the transfer of a quantum state from point A to point B with unit fidelity has been the center of attention during the last decades. One of the ways to aim this goal is to transfer a quantum state in a spin chain described by designing a Hamiltonian in which a mirror symmetry with respect to the network center is created. In this paper, we introduce a method based on the spectral distribution of the adjacency matrix and stratifying a spin network, with respect to an arbitrary vertex denoted by o which is called starting vertex (reference vertex), to make perfect quantum state transfer possible between antipodes in the spin network. Then we design the coupling coefficients in a way to create a mirror symmetry in the Hamiltonian with respect to the center of the network. In this method the initial state is encoded on the starting vertex and then it is received at its antipode. There is no need to consider any external control in this approach.