Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Optimizing the Runoff Estimation with HEC-HMS Model Using Spatial Evapotranspiration by the SEBS Model

Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m³/s (R²?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m³/s (R²?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m³ runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.

     

Leakage mitigation in NW FET using negative Schottky junction drain and its process variation analysis

Journal of Computational Electronics - In this work, a Schottky junction on the drain side employing low workfunction (WF) metal is proposed as a method to suppress the OFF-state leakage in...     

Polynomial time approximation algorithms for proportionate open‐shop scheduling

This paper deals with the presentation of polynomial time (approximation) algorithms for a variant of open‐shop scheduling, where the processing times are only machine‐dependent. This variant of scheduling is called proportionate scheduling and its applications are used in many real‐world environments. This paper develops three polynomial time algorithms for the problem. First, we present a polynomial time algorithm that solves the problem optimally if , where n and m denote the numbers of jobs and machines, respectively. If, on the other hand, , we develop a polynomial time approximation algorithm with a worst‐case performance ratio of that improves the bound existing for general open‐shops. Next, in the case of , we take into account the problem under consideration as a master problem and convert it into a simpler secondary approximation problem. Furthermore, we formulate both the master and secondary problems, and compare their complexity sizes. We finally present another polynomial time algorithm that provides optimal solution for a special case of the problem where .     

Relay-Assisted Wireless Energy Transfer for Efficient Spectrum Sharing in Harsh Environments

International Journal of Wireless Information Networks - With exponential growth in the number of wireless devices and limited available spectrum, the problem of spectrum sharing remains in...     

Microblogs recommendations based on implicit similarity in content social networks

With the development of online social networking applications, microblogs have become a necessary online communication network in daily life. Users are interested in obtaining personalized recommendations related to their tastes and needs. In some microblog systems, tags are not available, or the use of tags is rare. In addition, user-specified social relations are extremely rare. Hence, sparsity is a problem in microblog systems. To address this problem, we propose a new framework called Pblog to alleviate sparsity. Pblog identifies users’ interests via their microblogs and social relations and computes implicit similarity among users using a new algorithm. The experimental results indicated that the use of this algorithm can improve the results. In online social networks, such as Twitter, the number of microblogs in the system is high, and it is constantly increasing. Therefore, providing personalized recommendations to target users requires considerable time. To address this problem, the Pblog framework groups similar users using the analytic hierarchy process (AHP) method. Then, Pblog prunes microblogs of the target user group and recommends microblogs with higher ratings to the target user. In the experimental results section, the Pblog framework was compared with several other frameworks. All of these frameworks were run on two datasets: Twitter and Tumblr. Based on the results of these comparisons, the Pblog framework provides more appropriate recommendations to the target user than previous frameworks.

     

Algorithms for a realistic variant of flowshop scheduling

This paper deals with a realistic variant of flowshop scheduling, namely the hybrid flexible flowshop. A hybrid flowshop mixes the characteristics of regular flowshops and parallel machine problems by considering stages with parallel machines instead of having one single machine per stage. We also investigate the flexible version where stage skipping might occur, i.e., not all stages must be visited by all jobs. Lastly, we also consider job sequence dependent setup times per stage. The optimization criterion considered is makespan minimization. While many approaches for hybrid flowshops have been proposed, hybrid flexible flowshops have been rarely studied. The situation is even worse with the addition of sequence dependent setups. In this study, we propose two advanced algorithms that specifically deal with the flexible and setup characteristics of this problem. The first algorithm is a dynamic dispatching rule heuristic, and the second is an iterated local search metaheuristic. The proposed algorithms are evaluated by comparison against seven other high performing existing algorithms. The statistically sound results support the idea that the proposed algorithms are very competitive for the studied problem.     

The distributed permutation flowshop scheduling problem

This paper studies a new generalization of the regular permutation flowshop scheduling problem (PFSP) referred to as the distributed permutation flowshop scheduling problem or DPFSP. Under this generalization, we assume that there are a total of F identical factories or shops, each one with m machines disposed in series. A set of n available jobs have to be distributed among the F factories and then a processing sequence has to be derived for the jobs assigned to each factory. The optimization criterion is the minimization of the maximum completion time or makespan among the factories. This production setting is necessary in today's decentralized and globalized economy where several production centers might be available for a firm. We characterize the DPFSP and propose six different alternative mixed integer linear programming (MILP) models that are carefully and statistically analyzed for performance. We also propose two simple factory assignment rules together with 14 heuristics based on dispatching rules, effective constructive heuristics and variable neighborhood descent methods. A comprehensive computational and statistical analysis is conducted in order to analyze the performance of the proposed methods.     

A high performing metaheuristic for job shop scheduling with sequence-dependent setup times

This paper investigates scheduling job shop problems with sequence-dependent setup times under minimization of makespan. We develop an effective metaheuristic, simulated annealing with novel operators, to potentially solve the problem. Simulated annealing is a well-recognized algorithm and historically classified as a local-search-based metaheuristic. The performance of simulated annealing critically depends on its operators and parameters, in particular, its neighborhood search structure. In this paper, we propose an effective neighborhood search structure based on insertion neighborhoods as well as analyzing the behavior of simulated annealing with different types of operators and parameters by the means of Taguchi method. An experiment based on Taillard benchmark is conducted to evaluate the proposed algorithm against some effective algorithms existing in the literature. The results show that the proposed algorithm outperforms the other algorithms.     

Probabilistic approach to multi-objective Volt/Var control of distribution system considering hybrid fuel cell and wind energy sources using Improved Shuffled Frog Leaping Algorithm

Deregulation and restructuring in power systems, the ever-increasing demand for electricity, and concerns about the environment are the major driving forces for using Renewable Energy Sources (RES). Recently, Wind Farms (WFs) and Fuel Cell Power Plants (FCPPs) have gained great interest by Distribution Companies (DisCos) as the most common RES. In fact, the connection of enormous RES to existing distribution networks has changed the operation of distribution systems. It also affects the Volt/Var control problem, which is one of the most important schemes in distribution networks. Due to the intermittent characteristics of WFs, distribution systems should be analyzed using probabilistic approaches rather than deterministic ones. Therefore, this paper presents a new algorithm for the multi-objective probabilistic Volt/Var control problem in distribution systems including RES. In this regard, a probabilistic load flow based on Point Estimate Method (PEM) is used to consider the effect of uncertainty in electrical power production of WFs as well as load demands. The objective functions, which are investigated here, are the total cost of power generated by WFs, FCPPs and the grid; the total electrical energy losses and the total emission produced by WFs, FCPPs and DisCos. Moreover, a new optimization algorithm based on Improved Shuffled Frog Leaping Algorithm (ISFLA) is proposed to determine the best operating point for the active and reactive power generated by WFs and FCPPs, reactive power values of capacitors, and transformers’ tap positions for the next day. Using the fuzzy optimization method and max-min operator, DisCos can find solutions for different objective functions, which are optimal from economical, operational and environmental perspectives. Finally, a practical 85-bus distribution test system is used to investigate the feasibility and effectiveness of the proposed method.