Mathematical model for computer simulation and control of steelmaking

A dynamic model for computer simulation and control of steelmaking has been developed. It is essentially based on multicomponent mixed transport control theory with the incorporation of energy balance calculations. The model is applicable to both steelmaking in electric furnaces as well as in oxygen steelmaking converters. The adjustable parameters of the model for simulation of oxygen steelmaking are gas evolution rate (G_co). oxygen flux factor (F_o) and emulsification factor (EM). These simulation parameters, when combined with on-line measurement of off-gas composition and temperature, enable complete dynamic control of the process. The model developed is applied, as an example, to an industrially produced heat in a top blown oxygen steelmaking converter and the results of simulation are discussed.     

BRCA1 mutations in women attending clinics that evaluate the risk of breast cancer

BACKGROUND: To define the incidence of BRCA1 mutations among patients seen in clinics that evaluate the risk of breast cancer, we analyzed DNA samples from women seen in this setting and constructed probability tables to provide estimates of the likelihood of finding a BRCA1 mutation in individual families. METHODS: Clinical information, family histories, and blood for DNA analysis were obtained from 263 women with breast cancer. Conformation-sensitive gel electrophoresis and DNA sequencing were used to identify BRCA1 mutations. RESULTS: BRCA1 mutations were identified in 16 percent of women with a family history of breast cancer. Only 7 percent of women from families with a history of breast cancer but not ovarian cancer had BRCA1 mutations. The rates were higher among women from families with a history of both breast and ovarian cancer. Among family members, an average age of less than 55 years at the diagnosis of breast cancer, the presence of ovarian cancer, the presence of breast and ovarian cancer in the same woman, and Ashkenazi Jewish ancestry were all associated with an increased risk of detecting a BRCA1 mutation. No association was found between the presence of bilateral breast cancer or the number of breast cancers in a family and the detection of a BRCA1 mutation, or between the position of the mutation in the BRCA1 gene and the presence of ovarian cancer in a family. CONCLUSIONS: Among women with breast cancer and a family history of the disease, the percentage with BRCA1 coding-region mutations is less than the 45 percent predicted by genetic-linkage analysis. These results suggest that even in a referral clinic specializing in screening women from high-risk families, the majority of tests for BRCA1 mutations will be negative and therefore uninformative.     

IEEE-PES Transmission and Distribution Conference and Exposition Call for Papers

Static network-related system voltage stability margin (VSM) depends on the availability of reactive power to support the transport of real power from sources to sinks. Based on this premise, the total VAr loss is minimized in the unified OPF framework considering real and reactive power controllers, and its effect on VSM is studied. Studies are conducted on a three-bus system, the IEEE 30-bus system, and a 191-bus Indian electric power system, and their results are reported.     

Performance Optimizations for Deploying VoIP Services in Mesh Networks

In the recent past, there has been a tremendous increase in the popularity of VoIP services as a result of huge growth in broadband access. The same voice-over-Internet protocol (VoIP) service poses new challenges when deployed over a wireless mesh network, while enabling users to make voice calls using WiFi phones. Packet losses and delay due to interference in a multiple-hop mesh network with limited capacity can significantly degrade the end-to-end VoIP call quality. In this work, we discuss the basic requirements for efficient deployment of VoIP services over a mesh network. We present and evaluate practical optimizing techniques that can enhance the network capacity, maintain the VoIP quality and handle user mobility efficiently. Extensive experiments conducted on a real testbed and ns-2 provide insights into the performance issues and demonstrate the level of improvement that can be obtained by the proposed techniques. Specifically, we find that packet aggregation along with header compression can increase the number of supported VoIP calls in a multihop network by 2-3 times. The proposed fast path switching is highly effective in maintaining the VoIP quality. Our fast handoff scheme achieves almost negligible disruption during calls to roaming clients     

Characteristics of microstrip transmission lines withhigh-dielectric-constant substrates

An efficient numerical code is developed from a full-wave analysis in the Fourier transform domain to determine the characteristics of a single-strip or multistrip coplanar transmission line. Modes of both even and odd symmetries are included. The impedance of the transmission line is calculated using the power-current equivalent model. Coupling constants between the even and the odd modes are also calculated. Results are provided for a shielded two-strip coupled microstrip transmission line on high-dielectric-constant substrate such as lanthanum aluminate with applications to superconducting transmission lines     

Microwave-Assisted Synthesis of Fine Particle Oxides Employing Wet Redox Mixtures

Interaction of electromagnetic radiation with a physical mixture of metal nitrates and amides/hydrazides is observed to initiate high-temperature reactions, useful for realizing several high-temperature ceramic materials. A judicious choice of such redox mixtures undergoes exothermic reactions when they couple with microwave radiation. The coupling of electromagnetic radiation with metal salts and amides/hydrazides depends on the dielectric properties of the individual components in the reaction mixture. The approach has been used to prepare γ-Fe₂O₃, Fe₃O₄, MgCr₂O₄, α-CaCr₂O₄, and La_0.7Ba_0.3MnO₃.     

Evaluation of hot hardness and creep of a 350 grade commercial maraging steel

The hardening response and the indentation creep of a 350 grade commercial maraging steel were evaluated using a hot hardness tester. The hardness versus temperature plot exhibited three distinct regions. Hardness response was noted between 500–800 K. The unusually high values of activation energy and stress exponent obtained during the creep experiment could be rationalized by a novel concept of introducing a back stress term in the indentation creep relation. The corrected value of the activation energy was found to be reasonably in agreement with the activation energy for diffusion of Ni in iron. Results are supplemented with microstructural observation.     

Aggregation dynamics of particles in a microchannel due to an applied magnetic field

Functionalized magnetic microspheres have promising applications in different microfluidic devices including MEMS-scale biosensors. These particles exhibit magnetic field-induced aggregation, which can be harnessed to achieve several practical tasks in microfluidic devices. For this, the particle aggregation needs to be well characterized. Herein, a numerical simulation and experimental validation of particle-chaining is presented. Simulations show that the particle aggregation time scales linearly with a group parameter. The predicted growth of one- two- and three-particle chains with time shows a similar trend as that found in the experiments. The results of the study could help predicting the performance of magnetic aggregate-based lab-on-a-chip devices.     

Glass fiber-reinforced epoxy composites

Glass fiber-reinforced epoxy composites were prepared from the matrix resins tetraglycidyl diaminodiphenylmethane

1 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-diaminodiphenylmethane.

(TGDDM) and tetraglycidyl bis(o-toluidino)-methane

2 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-bis(o-toluidino)methane.

(TGMBT) using various amines like 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulfone (DDS) and diethylene triamine (DETA) as curing agents. The fabricated laminates were evaluated for their mechanical and dielectrical properties and chemical resistance. The composites prepared using an epoxy fortifier (20 phr) showed significant improvement in the mechanical properties.     

Grafting of methyl methacrylate onto guar gum by hydrogen peroxide initiation

Graft copolymerization of methyl methacrylate (MMA) onto guar gum (GG) in aqueous slurry has been carried out using hydrogen peroxide (H₂O₂) as initiator. The copolymers were characterized by infrared spectroscopy. The grafting parameters like percent grafting, grafting efficiency, percent add-on, and the grafting frequency were determined, and the effect of reaction time, concentration of initiator, and [GG]/[MMA] ratios on the grafting parameters have been discussed. The decrease in % add-on at increasing concentration of H₂O₂ indicated enhancement in the rate of homopolymerization of methyl methacrylate.