Hybrid intelligent framework for one-day ahead wind speed forecasting

Neural Computing and Applications - Nowadays wind power is considered as one of the fastest growing alternative energies, that is expected to continue to grow rapidly in the upcoming...     

Note: He puff system for dust detector upgrade

Local detection of surface dust is needed for the safe operation of next-step magnetic fusion devices such as ITER. An electrostatic dust detector, based on a grid of interlocking circuit traces biased to 50 V, has been developed to detect dust on remote surfaces and was successfully tested for the first time on the National Spherical Torus Experiment. In this note, we report a helium puff system that clears residual dust from this detector and any incident debris or fibers that might cause a permanent short circuit. Two consecutive helium puffs delivered by three 0.45 mm nozzles at an angle of 30° cleared the entire 5 cm × 5 cm surface of the detector.     

The Inhibition Performance of trans-Cinnamaldehyde as a Green Compound for Mild Steel in Acidic 1 M HCl Medium: Correlation between Experimental and Theoretical Studies

Protection of Metals and Physical Chemistry of Surfaces - Corrosion inhibition propriety of (2E)-3-phenylprop-2-enal, known as trans-cinnamaldehyde (TCA) for mild steel in 1 M HCl medium was...     

L-cystein modified bentonite-cellulose nanocomposite (cellu/cys-bent) for adsorption of Cu2+, Pb2+, and Cd2+ ions from aqueous solution

In this study, L-cystein modified bentonite-cellulose (cellu/cys-bent) nanocomposite was synthesized and characterized by XRD, FTIR, SEM with EDS, TGA, and TEM techniques. In order to optimize the process the effect of various operational parameters such as pH, adsorbent dosage, contact time, and temperature were also investigated. The adsorption experiments were carried out in initial concentrations range of 20-100 mg L^?1and the adsorbent affinity for metal ions was found to be in order of Cu²⁺ > Pb²⁺ > Cd²⁺. The optimum pH for adsorption of Cu²⁺ and Cd²⁺ was observed at 5 while for Pb²⁺ it was pH 6. Based on the Langmuir model, the maximum adsorption capacity of Cu²⁺, Pb²⁺, and Cd²⁺ at 50^?C was found to be 32.36, 18.52, and 16.12 mg g^?1, respectively. The Langmuir isotherm and pseudo-second order model were found to be better fitted than the other isotherms and kinetic models. The results of thermodynamic parameters confirmed the process to be endothermic and spontaneous in nature.     

Routing for disruption tolerant networks: taxonomy and design

Communication networks, whether they are wired or wireless, have traditionally been assumed to be connected at least most of the time. However, emerging applications such as emergency response, special operations, smart environments, VANETs, etc. coupled with node heterogeneity and volatile links (e.g. due to wireless propagation phenomena and node mobility) will likely change the typical conditions under which networks operate. In fact, in such scenarios, networks may be mostly disconnected, i.e., most of the time, end-to-end paths connecting every node pair do not exist. To cope with frequent, long-lived disconnections, opportunistic routing techniques have been proposed in which, at every hop, a node decides whether it should forward or store-and-carry a message. Despite a growing number of such proposals, there still exists little consensus on the most suitable routing algorithm(s) in this context. One of the reasons is the large diversity of emerging wireless applications and networks exhibiting such “episodic” connectivity. These networks often have very different characteristics and requirements, making it very difficult, if not impossible, to design a routing solution that fits all. In this paper, we first break up existing routing strategies into a small number of common and tunable routing modules (e.g. message replication, coding, etc.), and then show how and when a given routing module should be used, depending on the set of network characteristics exhibited by the wireless application. We further attempt to create a taxonomy for intermittently connected networks. We try to identify generic network characteristics that are relevant to the routing process (e.g., network density, node heterogeneity, mobility patterns) and dissect different “challenged” wireless networks or applications based on these characteristics. Our goal is to identify a set of useful design guidelines that will enable one to choose an appropriate routing protocol for the application or network in hand. Finally, to demonstrate the utility of our approach, we take up some case studies of challenged wireless networks, and validate some of our routing design principles using simulations.     

Effect of some tripodal bipyrazolic compounds on C38 steel corrosion in hydrochloric acid solution

The corrosion inhibition of C38 steel in molar HCl by N,N-bis[2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl]buthylamine (P1) and 5-{N,N-bis[2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl] amino} pentanol (P2) has been investigated at 308 K using electrochemical and weight loss measurements. Measurements show that these compounds act as good inhibitors without changing the mechanism of the corrosion process. Moreover, the inhibiting efficiency increases with the increase in concentration of the studied inhibitors. Compound P2 showed better protection properties even at relatively higher temperatures when compared to P1. The associated activation corrosion and free adsorption energies have been determined. P1 and P2 are adsorbed on the C38 steel surface according to a Langmuir isotherm adsorption model.     

Conservative Polarimetric Scatterers and Their Role in Incorrect Extensions of the Cameron Decomposition

The properties of conservative symmetric polarimetric scatterer scattering matrices are examined. It is shown that the unambiguous rotation angle for "conservative" symmetric polarimetric scatterers is the interval (-pi/4,+pi/4] as compared with (-pi/2,+pi/2] for nonconservative symmetric scatterers. Errors relating to the Cameron decomposition, which are recently introduced into the literature, are discussed. It is demonstrated that these errors arise from a faulty symmetric scatterer scattering matrix distance measure. This, in turn, leads to an improper mapping of the symmetric scatterer unit disk to a hemisphere. The correct mapping of the symmetric scatterer unit disk to the symmetric scatterer unit sphere is described     

Hydatid cyst of the psoas muscle. Apropos of a case

The authors report a rare case of hydatid cyst of the psoas muscle in a 28-year-old woman, operated for vertebrospinal hydatid cyst. The patient presented with a left iliac fossa mass. Ultrasonography and computed tomography contributed to the preoperative diagnosis, despite negative hydatid serology. A retroperitoneal approach by left lumbotomy with partial pericystectomy was performed. In the light of this case, the authors discuss the diagnostic and therapeutic problems raised by hydatid cyst of the psoas muscle.     

Nanocarriers for Biomedicine: From Lipid Formulations to Inorganic and Hybrid Nanoparticles

Encapsulation of cargoes in nanocontainers is widely used in different fields to solve the problems of their solubility, homogeneity, stability, protection from unwanted chemical and biological destructive effects, and functional activity improvement. This approach is of special importance in biomedicine, since this makes it possible to reduce the limitations of drug delivery related to the toxicity and side effects of therapeutics, their low bioavailability and biocompatibility. This review highlights current progress in the use of lipid systems to deliver active substances to the human body. Various lipid compositions modified with amphiphilic open-chain and macrocyclic compounds, peptide molecules and alternative target ligands are discussed. Liposome modification also evolves by creating new hybrid structures consisting of organic and inorganic parts. Such nanohybrid platforms include cerasomes, which are considered as alternative nanocarriers allowing to reduce inherent limitations of lipid nanoparticles. Compositions based on mesoporous silica are beginning to acquire no less relevance due to their unique features, such as advanced porous properties, well-proven drug delivery efficiency and their versatility for creating highly efficient nanomaterials. The types of silica nanoparticles, their efficacy in biomedical applications and hybrid inorganic-polymer platforms are the subject of discussion in this review, with current challenges emphasized.