Green synthesis of zinc oxide nanoparticles using Amygdalus scoparia Spach stem bark extract and their applications as an alternative antimicrobial,anticancer, and anti-diabetic agent

For the first time in this study, Zinc oxide nanoparticles were biosynthesized by the eco-friendly and cost-effective procedure using Amygdalus scoparia stem bark extract then used as antibacterial, antifungal, anticancer, and anti-diabetic agents. The characterization techniques confirmed the biosynthesis, crystalline nature, structure, size, elemental composition of ZnO NPs and bioactive compounds that exist in A. scoparia extract accounting for Zn²⁺ ion reduction, capping and stabilization of ZnO NPs. The ZnO NPs displayed remarkable inhibitory activity against E. coli, E. aerigenes, S. aureus, P. oryzae, F. thapsinum, and F. semitectum compared to antibiotic standards. The ZnO NPs showed significant inhibitory effects on cancer cell lines, while it had no toxic effect on Vero normal cell line. The ZnO NPs (30 mg/kg)-treated diabetic rats showed significantly higher levels of insulin and lower AST, ALT and blood glucose compared with the STZ induced diabetic group and other treated groups (P < 0.05). The ZnO NPs- and extract-treated rats showed significantly higher levels of IR, GluT2, and GCK expression and lower TNFα expression compared with the STZ induced diabetic rats. Our findings showed that ZnO NPs represented an outstanding performance for biological applications.     

Asymptotically optimum detection of primary user in cognitive radio networks

Traditionally, the frequency spectrum is licensed to users by government agencies in a fixed manner where the licensee has exclusive right to access the allocated band. However, with increasing demand for the spectrum and scarcity of vacant bands, a spectrum policy reform seems inevitable. Meanwhile, recent measurements suggest the possibility of sharing spectrum among different parties subject to interference-protection constraints. In order to enable access to an unused licensed spectrum, a secondary user has to monitor licensed bands and opportunistically transmit whenever no primary signal is detected. Spectrum-sharing between a primary licensee and a group of secondary users has been studied. The structure of an asymptotically optimum detector based on the measurements of all secondary users is derived and the effect of the quantisation error in such a system is evaluated. Also, it is shown that by using the proposed detector in a sequential detection structure, it is possible to shorten the decision time needed by the detector. The results show the superiority of the proposed detector to other schemes.     

Experience classification for transfer learning in traffic signal control

In recent years, due to the drastic rise in the number of vehicles and the lack of sufficient infrastructure, traffic jams, air pollution, and fuel consumption have increased in cities. The optimization of timing for traffic lights is one of the solutions for the mentioned problems. Many methods have been introduced to deal with these problems, including reinforcement learning. Although a great number of learning-based methods have been used in traffic signal control, they suffer from poor performance and slow learning convergence. In this paper, a transfer learning-based method for traffic signal control has been proposed. Multi-agent system has also been used for modelling the traffic network and transfer learning has been used to make reinforcement learning agents transfer their experience to each other. Furthermore, a classifier has been utilized to classify the transferred experiences. The results show that using the proposed method leads to a significant improvement on average delay time and convergence time of the learning process.

     

A novel image encryption based on hash function with only two-round diffusion process

In this paper, a novel algorithm for image encryption based on hash function is proposed. In our algorithm, a 512-bit long external secret key is used as the input value of the salsa20 hash function. First of all, the hash function is modified to generate a key stream which is more suitable for image encryption. Then the final encryption key stream is produced by correlating the key stream and plaintext resulting in both key sensitivity and plaintext sensitivity. This scheme can achieve high sensitivity, high complexity, and high security through only two rounds of diffusion process. In the first round of diffusion process, an original image is partitioned horizontally to an array which consists of 1,024 sections of size 8 × 8. In the second round, the same operation is applied vertically to the transpose of the obtained array. The main idea of the algorithm is to use the average of image data for encryption. To encrypt each section, the average of other sections is employed. The algorithm uses different averages when encrypting different input images (even with the same sequence based on hash function). This, in turn, will significantly increase the resistance of the cryptosystem against known/chosen-plaintext and differential attacks. It is demonstrated that the 2D correlation coefficients (CC), peak signal-to-noise ratio (PSNR), encryption quality (EQ), entropy, mean absolute error (MAE) and decryption quality can satisfy security and performance requirements (CC <0.002177, PSNR <8.4642, EQ >204.8, entropy >7.9974 and MAE >79.35). The number of pixel change rate (NPCR) analysis has revealed that when only one pixel of the plain-image is modified, almost all of the cipher pixels will change (NPCR >99.6125 %) and the unified average changing intensity is high (UACI >33.458 %). Moreover, our proposed algorithm is very sensitive with respect to small changes (e.g., modification of only one bit) in the external secret key (NPCR >99.65 %, UACI >33.55 %). It is shown that this algorithm yields better security performance in comparison to the results obtained from other algorithms.     

Attention control with reinforcement learning for face recognition under partial occlusion

In this paper a new method for handling occlusion in face recognition is presented. In this method the faces are partitioned into blocks and a sequential recognition structure is developed. Then, a spatial attention control strategy over the blocks is learned using reinforcement learning. The outcome of this learning is a sorted list of blocks according to their average importance in the face recognition task. In the recall mode, the sorted blocks are employed sequentially until a confident decision is made. Obtained results of various experiments on the AR face database demonstrate the superior performance of proposed method as compared with that of the holistic approach in the recognition of occluded faces.     

A Novel Model for the Time Dependent Competitive Vehicle Routing Problem: Modified Random Topology Particle Swarm Optimization

This paper presents a novel model for a time dependent vehicle routing problem when there is a competition between distribution companies for obtaining more sales. In a real-world situation many factors cause the time dependency of travel times, for example traffic condition on peak hours plays an essential role in outcomes of the planned schedule in urban areas. This problem is named as “Time dependent competitive vehicle routing problem” (TDVRPC) which a model is presented to satisfy the “non-passing” property. The main objectives are to minimize the travel cost and maximize the sale in order to serve customers before other rival distributors. To solve the problem, a Modified Random Topology Particle Swarm Optimization algorithm (RT-PSO) is proposed and the results are compared with branch and bound algorithm in small size problems. In large scales, comparison is done with original PSO. The results show the capability of the proposed RT-PSO method for handling this problem.     

Nano levels detection of beryllium by a novel beryllium PVC-based membrane sensor based on 2,3,5,6,8,9-hexahydro-1,4,7,10-benzotetra oxacyclododecine-12-carbaldehyde-12-(2,4-dinitrophenyl)hy

A novel poly(vinyl chloride)-based 2,3,5,6,8,9-hexahydro-1,4,7,10-benzotetra oxacyclododecine-12-carbaldehyde-12-(2,4-dinitrophenyl)hy (PBC) with sodium tetraphenyl borate (NaTPB) as an anion excluder, benzyl acetate (BA), acetophenon (AP) and o-nitrophenyloctyl ether (NPOE) as plasticizing solvent mediators was prepared and investigated as a beryllium selective sensor. The best performance was observed with the membrane having the PVC–NaTPB–NPOE–PBC composition 30%:3%:62%:5%, which worked well over a very wide concentration range (1.0×10⁻⁷ M to 1.0×10⁻¹ M). The sensor exhibits a Nernstian slope of 29.9 mV per decade of Be²⁺ activity. The detection limit of the sensor is 7.0×10⁻⁸ M (630 ppt). The proposed electrode shows excellent discriminating ability toward Be²⁺ ion with regard to alkali, alkaline earth, transition and heavy metal ions. It was successfully applied to the determination of beryllium in a mineral sample.     

Taguchi Optimization of Solvent-Antisolvent Crystallization to Prepare Ammonium Perchlorate Particles

The sphericity and size of ammonium perchlorate (AP) particles significantly influence the properties of composite propellants. As the AP particles become more spherical, the accumulation coefficient increases, the viscosity during casting decreases, and the particle loading and burning rate increase. Hence, the production of micronized AP particles with an average size between 1 and 20 μm is important to increase the loading percentage of AP in the composite propellant. Here, the Taguchi experimental design was used to optimize the solvent-antisolvent crystallization (SAC) process for the preparation of micronized AP particles with higher sphericity. SAC parameters such as the type of antisolvent, the solvent-to-antisolvent ratio, the antisolvent temperature, the stirring speed, and the retention time were investigated at four levels. The type of antisolvent and the solvent-to-antisolvent ratio were found to mainly contribute to improving the sphericity and size of the AP particles, respectively.     

Analytical investigation of viscoelastic creeping flow and heat transfer inside a curved rectangular duct

An exact solution for creeping viscoelastic flow and heat transfer in a curved rectangular duct is presented based on the order of magnitude technique. Here, the Criminale-Eriksen-Filbey model is used as constitutive equation. The closed form of axial velocity, flow rate, flow resistance ratio, pressure distribution, stress field, temperature and Nusselt number are presented, and the effect of aspect ratio, curvature ratio and both of the first and the second normal stress differences on the flow and heat transfer are investigated. One of the noticeable results of current research is confirming the independency of flow resistance and Nusselt number of creeping flow inside the curved duct to curvature ratio at aspect ratio 0.89077.