Sequestration of muscarinic acetylcholine receptor m2 subtypes. Facilitation by G protein-coupled receptor kinase (GRK2) and attenuation by a dominant-negative mutant of GRK2

Sequestration of m2 receptors (muscarinic acetylcholine receptor m2 subtypes), which was assessed as loss of N-[3H]methylscopolamine ([3H]NMS) binding activity from the cell surface, was examined in COS 7 and BHK-21 cells that had been transfected with expression vectors encoding the m2 receptor and, independently, vectors encoding a G protein-coupled receptor kinase (GRK2) (beta-adrenergic receptor kinase 1) or a GRK2 dominant-negative mutant (DN-GRK2). The sequestration of m2 receptors became apparent when the cells were treated with 10(-5) M or higher concentrations of carbamylcholine. In this case, approximately 40% or 20-25% of the [3H]NMS binding sites on COS 7 or BHK-21 cells, respectively, were sequestered with a half-life of 15-25 min. In cells in which GRK2 was also expressed, the sequestration became apparent in the presence of 10(-7) M carbamylcholine. Approximately 40% of the [3H]NMS binding sites on both COS 7 and BHK-21 cells were sequestered in the presence of 10(-6) M or higher concentrations of carbamylcholine. When DN-GRK2 was expressed in COS 7 cells, the proportion of [3H]NMS binding sites sequestered in the presence of 10(-5) M or higher concentrations of carbamylcholine was reduced to 20-30%. These results indicate that the phosphorylation of m2 receptors by GRK2 facilitates their sequestration. These results are in contrast with the absence of a correlation between sequestration and the phosphorylation of beta-adrenergic receptors by the GRK2 and suggests that the consequences of phosphorylation by GRK2 are different for different receptors.     

Information systems effectiveness: research designs for causal inference

Abstract. This paper examines the capacity of the research designs of 37 empirical studies of information systems (IS) effectiveness to provide a basis for the development of theories about behaviour related to IS effectiveness. The power of each study to support causal inference was evaluated in terms of (a) its handling of the time dimension, (b) its ability to weigh differences and (c) its resistance to internal validity threats that pose alternative explanations for its reported findings. Of the reviewed studies, 29.7% could account for the time dimension, 32.4% employed a comparison group and 16.2% were not susceptible to any internal validity threats. Only 13.5% of the studies combined an accounting for the time dimension with the use of a comparison group. Of these, however, only 5.4% were also invulnerable to internal validity threats. The research designs of nearly 95% of these published studies were deficient in supporting causal inference. In those studies, suggestions that one variable was causally related to another variable could not be substantiated. Encouragement for the future capacity of IS effectiveness research to support causal inference was found in a trend towards the use of quasiexperimental designs. Recommendations are made regarding ways to increase the inferential capacity of research designs employed in the study of IS effectiveness.     

Diffusion-controlled size-selective chloride ion sensing in the presence of bromide ion using a thin, nanoporous, plasma-polymerized coating on an Ag/AgCl electrode

We have developed a diffusion-controlled size-selective method for sensing chloride ion in the presence of bromide ion, based on a thin, nanoporous, plasma-polymerized coating of hexamethyldisiloxane on an Ag/AgCl electrode. Sub-nanometer-sized pores responsible for a highly cross-linked polymer network in the plasma-polymerized coating allowed diffusion-controlled permeation of chloride ion while blocking the larger bromide ion. An electrode coating of thickness greater than 70 nm enabled chloride detection in the concentration range 1-10 mM in the presence of 0.63 mM bromide ion. Advantages of this approach are: (1) simple design compared with ionophore-based strategies and (2) compatibility with microfabrication and mass production processes.     

Evaluation of hydrological processes in a mountainous small basin using a quinone biomarker.

An applicability of quinone biomarker to the analysis of hillslope runoff was investigated. At first, quinone profiles of three streams as well as a hillslope runoff in a forested headwater catchment were compared. The quinone composition of hillslope runoff differed from others. Moreover, there were remarkable differences in quinone profile of hillslope runoff under different rainfall conditions. Then, the behavior of quinone biomarker during the increase and decrease of hillslope runoff after a rainfall event was examined. The fractional changes in Q-9 (H2), Q-10 (H2), Q-11, MK-6 and MK-10 suggested the effect of interflow.     

Mutations in the N-terminal globular domain of the type X collagen gene (COL10A1) in patients with Schmid metaphyseal chondrodysplasia

STATEMENT OF PROBLEM: Improved dental stone has been widely used for producing dies for the fabrication of restorations with the lost-wax technique. Improved dental stone is used for several reasons, but it is selected most often because of its reasonable cost, ease of use, and ability to produce consistent results. PURPOSE: This study evaluated the ability of an epoxy resin die material and a type IV dental stone to dimensionally reproduce a custom-fabricated metal die. MATERIAL AND METHODS: Dies were fabricated and measurements were made from three reference lines. Measurements were repeated three times for the master die and for the specimen dies. A mean measurement and percent relative change for each dimension was calculated. RESULTS: A significant difference in the relative change for die height was found between the groups studied (p < 0.003). CONCLUSIONS: This epoxy die system will provide a degree of dimensional accuracy comparable to gypsum when used with addition silicone impression material.     

Thermal behaviour of TiO2-encapsulating polymers

Comparing the thermal properties of TiO₂ encapsulating polystyrene and poly(methyl methacrylate) with those of TiO₂ dispersion polymers it was found that the encapsulating polymers have two thermal relaxation regions. The activation energy of those thermal relaxation regions was determined using the Wunderlich method and it was found that the values are similar to the activation energy for the dynamic dispersion. It is suggested that the low-temperature thermal relaxation is caused by the local change of conformation of molecular chains, while the high-temperature thermal relaxation is similar to that of the normal glass transition temperature including the interaction with TiO₂. In addition, the thermal behaviour near the degradation point in different atmospheres indicates that the encapsulating polymer has a specific structure for adsorbing a large amount of oxygen.     

Interaction of cation-exchange membrane with polycation I. Poly(N-methyl-4-vinylpyridinium chloride)

We elucidated the effect of the molecular weight of poly(N-methyl-4-vinylpyridinium chloride) (PMVP) on its adsorbed or ion-exchanged amount on the cation-exchange membrane and the preferntial permselectivity of the membrane for sodium ion to calcium ion. The amount of the adsorbed or ion-exchanged PMVP increases with time and then attains to a definite value at a definite concentration. Also, the ultimate value increases with increasing the concentration of PMVP. When the molecular weight of PMVP is 3090, the ratio of the pyridinium groups of PMVP ion-exchanged with the sulfonic acid groups on the membrane surface to the total pyridinium groups of the cohered PMVP is in the range of 70–80%. The relative transport number of calcium ions to sodium ions(P_Na^Ca) decreases with increasing the amount of adsorbed or ion-exchanged PMVP and the numbe rof non-ion-exchanged pyridinium groups of PMVP and the number of non-ion-exchanged pyridinium groups of PMVP on the membrane surface. The smaller the molecular weight of PMVP, the more the adsorbed or ion-exchanged amount and the more preferable the permselectivity for sodium ion.     

Enzymatic syntheses of N-lauroyl-β-alanine homologs in organic media

Enyzmatic amidation of the primary amines β-alanine ethyl ester and 3-aminopropionitrile with methyl laurate by means of immobilized lipase (Candida antarctica lipase, CAL) resulted in the formation in good yield of N-lauroyl-β-alanine ethyl ester and 3-(N-lauroylamino)-propionitrile, respectively. When 3-amino-propionitrile was used as substrate, diisopropyl ether was a suitable solvent. Changing the reaction temperature (12–80°C) did not affect the yields, and room temperature was a suitable temperature for this reaction. In the investigation of reaction conditions, the use of equimolar amounts (5 mmol) of substrate and ester, along with 0.5 g of CAL, in diisopropyl ether gave the best yield (99.3%) after 24 h of incubation at 24°C. The enzyme activity in the amidation reaction did not decrease even after six uses. With β-alanine ethyl ester hydrochloride as substrate, diisopropyl ether was unsuited as a solvent owing to the low solubility of the substrate in this solvent. In this reaction, the best yield (82.0%) was attained by using dioxane as solvent. CAL achieved higher extents of amide synthesis with long-chain than with short-chain ester substrates. The enzyme accepted only nonbulky primary amines as substrates.     

Warm deep drawing of wrought magnesium alloy sheets produced by semi-solid roll strip-casting process

This paper is concerned with the development of a continuous strip-casting technology to facilitate the manufacture of magnesium sheet alloys economically whilst maintaining high quality. Established in the paper is warm formability of cast magnesium alloy sheets after being hot rolled by semi-solid roll strip-casting process. It has been found that magnesium sheet with 2.0–4.0 mm thickness could be produced at a speed of 25 m/min. Hot rolling and annealing temperatures during hot rolling were also changed to examine which condition would be appropriate for producing wrought magnesium alloys with good formability. Microstructures of the crystals of the manufactured wrought magnesium alloys were observed. It has been found that a limiting drawing ratio of 2.7 was possible in a warm deep-drawing test of the cast magnesium alloy sheets after being hot rolled.     

Gaze direction based vehicle teleoperation method with omnidirectional image stabilization and automatic body rotation control

In robot teleoperation, a robot works as a physical agent at a remote site for a robot operator. There are mainly two tasks in robot teleoperation using camera images: environment recognition using visual information and robot control according to the recognition. In this paper, we propose a gaze direction based vehicle teleoperation method with an omnidirectional image stabilization and an automatic body rotation control. In the proposed method, we manage above two tasks in the same manner that are usually treated separately. This method is an intuitive vehicle teleoperation method where an operator do not need to have concern about vehicle body orientations and can absorb differences of vehicle driving mechanisms. That is, this method frees an operator from being bothered from controlling a vehicle and the operator can concentrate on where he/she intends to go. This method mainly consists of two technologies: an omnidirectional image stabilization technology and automatic body rotation control. The conducted experiments show effectiveness of the proposed method.