Mine operating accurate stability control with optical fibersensing and Bragg grating technology: the European BRITE/EURAM STABILOSproject

Recent developments of stability control in mines, essentially based on Ge-doped fiber Bragg gratings (FBG) are reported including results about the different aspects of the system: accurate characterizations of FBG, sensor network topology and multiplexing method, user interface design and sensor packaging     

The effect of sodium sulfate on solidification/stabilization of a synthetic electroplating sludge in cementitious binders

The effect of sodium sulfate on the solidification/stabilization of a large quantity of a synthetic electroplating sludge in cementitious binders was s     

Electrical qualification of new ultrathin integration techniques

The aim of this paper is to analyze the feasibility of ultrathin packages through the electrical qualification of the technological process used, i.e. mechanical lapping. It considers polysilicon bipolar transistors which thickness can reach values lower than 10 μm. Forward mode and reverse mode characterizations show no significant degradation of pertinent characteristics, thus allowing to find applications in new compact packaging concept.     

Antimicrobial activity of statistical polymethacrylic sulfopropylbetaines against gram‐positive and gram‐negative bacteria

A series of statistical copolymers derived from 2‐(dimethylamino)ethyl methacrylate with four different hydrophobic comonomers (ethyl, butyl, cyclohexyl, and octyl methacrylates) have been prepared via conventional free radical copolymerization under bulk conditions. The copolymers have been subsequently modified, with 1,3‐propanesultone to yield the corresponding polysulfoproylbetaine derivatives. Those copolymers exhibiting the requisite aqueous solubility have been screened with respect to their antimicrobial activity against two common and notorious pathogens, namely Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). We show that certain copolymers do indeed exhibit antimicrobial activity. The extent of activity is related to the molecular characteristics of the materials such as the molar composition and structure of the hydrophobic comonomer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1036–1041, 2006     

Development and evaluation of terminally epoxidized triglycerides for coatings applications

Epoxidized 10-undecenoic acid triglyceride, an experimental seed oil derivative that has a terminal epoxy group on each of the three acyl glyceride segments, has been found to have good reactivity with amine curatives and allows room temperature cures to be obtained. Coatings based on epoxidized 10-undercenoic acid triglyceride have also shown excellent UV stability. As an example, coatings samples placed in a QUVA chamber exhibit no loss in gloss after 3000 hr of a cycled exposure to high intensity UV lamps and moisture at temperatures of 50–60°C. In comparison, coatings based on standard liquid epoxy resins (LERs) and commercially available hydrogenated LERs lose gloss due to chalking/decomposition within 200–800 hr. Presented at the 81 st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Coherent addition of adjacent lasers by forked eigenstate operation

Forked laser eigenstates are shown to provide a powerful tool both to phase lock spatially separated laser oscillators and to add their powers coherently into a TEM(00) output beam. Coherent addition of the powers extracted from two fiber-coupled diode-pumped Nd:YAG channels is theoretically and experimentally demonstrated. Pure TEM(00) oscillation is obtained with a 20% optical-to-optical conversion efficiency. The coherence of the two-propagation-axis laser is proved, and single-frequency operation is demonstrated. The scalability of the scheme is discussed.     

Epidural hematoma with atypical clinical course

The prognosis of epidural haematomas (EDH) is generally favourable if an operation is carried out in good time. Suspected EDH is mostly diagnosed as a result of a "typical" neurological manifestation (initial unconsciousness/asymptomatic interval/loss of consciousness), which then leads to an in-depth diagnosis (X-ray of the skull, CT, MRI). However, atypical clinical manifestations are frequent and can result in dangerous delays in diagnosis and treatment. A decisive factor in the early detection of EDH is close clinical-neurological monitoring by specially trained staff and their prompt reaction when changes occur, no matter how minor. Qualitative changes in the patient's state of consciousness and behaviour are just as important in this respect as quantitative ones.     

Mapping of Sahelian vegetation parameters from ERS scatterometer data with an evolution strategies algorithm

The West African Sahel rainfall regime is known for its spatio-temporal variability at different scales which has a strong impact on vegetation development. This study presents results of the combined use of a simple water balance model, a radiative transfer model and ERS scatterometer data to produce map of vegetation biomass and thus vegetation cover at a spatial resolution of 25 km. The backscattering coefficient measured by spaceborne wind scatterometers over Sahel shows a marked seasonality linked to the drastic changes of both soil and vegetation dielectric properties associated to the alternating dry and wet seasons. For lack of a direct observation, METEOSAT rainfall estimates are used to calculate temporal series of soil moisture with the help of a water balance model. This a priori information is used as input of the radiative transfer model that simulates the interaction between the radar wave and the surface components (soil and vegetation). Then, an inversion algorithm is applied to retrieve vegetation aerial mass from the ERS scatterometer data. Because of the nonlinear feature of the inverse problem to be solved, the inversion is performed using a global stochastic nonlinear inversion method. A good agreement is obtained between the inverse solutions and independent field measurements with mean and standard deviation of −54 and 130 kg of dry matter by hectare (kg DM/ha), respectively. The algorithm is then applied to a 350,000 km² area including the Malian Gourma and Seno region and a Sahelian part of Burkina Faso during two contrasted seasons (1999 and 2000). At the considered resolution, the obtained herbaceous mass maps show a global qualitative consistency (r²=0.71) with NDVI images acquired by the VEGETATION instrument.     

Surface potential measurements of Langmuir films of azo dye/liquid crystal mixtures

Two-component films of a non-amphiphilic azo dye and a liquid crystal with strongly polar –CN group were studied at an air–water interface on the basis of the surface potential–mean molecular area dependence recorded simultaneously with the surface pressure–mean molecular area isotherm. Additionally, the morphology of the films was monitored with the aid of Brewster angle microscope. A conventional Langmuir technique was used to form dye/liquid crystal films during reduction and expansion of an area occupied by the molecules. From the surface potential value, the effective dipole moment in the first monolayer formed on the water was calculated. Moreover, the number of molecules with dipole moments directed from the water to the air with respect to those directed towards water was estimated. The influence of the two components' miscibilities upon the surface potential after addition of the dye to the liquid crystal was determined.