The Chemistry of DPPH· Free Radical and Congeners

Since the discovery in 1922 of 2,2-diphenyl-1-(2,4,6-trinitrophenyl) hydrazyl stable free radical (DPPH^·), the chemistry of such open-shell compounds has developed continuously, allowing for both theoretical and practical advances in the free radical chemistry area. This review presents the important, general and modern aspects of the chemistry of hydrazyl free radicals and the science behind it.     

Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.     

System identification from noisy measurements by using instrumental variables and subspace fitting

This paper considers the estimation of the parameters of a linear discrete-time system from noise-perturbed input and output measurements. The conditions imposed on the system are fairly general. In particular, the input and output noises are allowed to be auto-correlated and they may be cross-correlated as well. The proposed method makes use of an instrumental variable (IV)-vector to produce a covariance matrix that is pre- and postmultiplied by some prechosen weights. The singular vectors of the so-obtained matrix possess complete information on the system parameters. A weighted subspace fitting (WSF) method is then applied to the aforementioned singular vectors to consistently estimate the parameters of the system. The IV-WSF technique suggested herein is noniterative and easy to implement, and has a small computational burden. The asymptotic distribution of its estimation errors is derived and the result is used to motivate the choice of the weighting matrix in the WSF step and also to predict the estimation accuracy. Numerical examples are included to illustrate the performance achievable by the method.This work has been supported by the Swedish Research Council of Engineering Sciences under contract 93-669 and by the Göran Gustafsson Foundation.     

MODE-type algorithm for estimating damped, undamped, or explosive modes

We propose a new algorithm for estimating the parameters of damped, undamped, or explosive sinusoidal signals. The algorithm resembles the MODE algorithm, which is commonly used for direction of arrival estimation in the array signal processing field. It is derived as a natural approximation to an asymptotically (high-SNR) optimal parameter estimator and has excellent statistical accuracy. Nevertheless, it is computationally simple and easy to implement. Numerical examples are included to illustrate the performance of the proposed method.This work has been supported by the Swedish Research Council for Engineering Sciences (TFR).     

The effect of structural features on mechanical properties of loose optical fiber poly(butylene terephthalate) tubes

Results of a study on the modifying mechanical properties of loose optical‐fiber poly(butylene terephthalate) (PBT) tubes, produced during the standard industrial extrusion process, show that heat treatment make the structure of their material to change. The study comprised measurements of mechanical strengths properties of the tubes (tensile strength, compression strength, kinking) and determination of tube material structure [by differential thermal analysis (DTA), wide angle X‐ray scattering analysis (WAXD), and scanning electron microscopy (SEM)]. Results of the study allowed observation that the annealing at 70°C for 34 h of the tubes caused the crystalline α phase to increase in the tube material from ～28.5% to ～31.5% and the structure of the existing crystallites to become more perfect. This made the values of certain mechanical properties of the tubes to increase even by as much as 30%. The tubes following such thermal treatment could be used in cables exposed to heavy‐duty operation in arduous environments, where a larger margin from the standpoint of mechanical properties is required. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2130–2134, 2002     

Further evidence of responsibility of impurities in MgO for variability in its basicity and catalytic performance in oxidative coupling of methane

Further evidence was delivered that certain impurities, which could be contained in MgO samples, might be responsible for observed variability in MgO basicity and catalytic performance in oxidative coupling of methane. The surface basicity/base strength distribution of a series of MgO samples containing or not containing Ca and Na impurities was determined by a temperature-programmed desorption of CO₂. It was revealed that samples containing Ca and Na impurities have much more medium, strong and very strong basic sites. The surface basicity of MgO samples containing added alkali or alkaline earth compounds or water was characterized by a test reaction of transformation of 2-butanol. It was confirmed that the introduction of these compounds to a pure MgO enhanced both its basicity and activity in oxidative coupling of methane.     

Postintegration methods for numerical integration of non-linear dynamic equations of motion

The paper presents a family of methods with postintegration, for numerical integration of non-linear dynamic equations of motion of discrete systems. Both explicit and implicit algorithms of these methods are conditionally stable, but can give solutions of accuracy of a few orders higher than the known methods with preintegration, corresponding to them. A general analysis of stability and accuracy of single-step methods is carried out. The postintegration methods have been tested on a single-degree-of-freedom non-linear system.     

Multifactorial assessment of bulimia nervosa.

Investigated a multifactorial approach to the assessment of bulimia nervosa by means of hierarchical factor analysis. 245 bulimia nervosa patients and 68 patients with either anorexia nervosa or eating disorders not otherwise specified were administered a self-report battery that was organized into 21 dimensions relevant to eating disorder patients. When dimensions from this battery were subjected to hierarchical factor analysis, support for bulimia nervosa as a unique diagnostic category was obtained. However, the emergence of 3 secondary factors and 6 primary factors suggests that bulimia nervosa can also be described more complexly. The emergence of a multifactorial model of bulimia nervosa that incorporates several existing unidimensional models suggests the potential for both divergent and complicated clinical presentation in bulimia nervosa patients. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Association of Escherichia coli O157:H7 with preharvest leaf lettuce upon exposure to contaminated irrigation water.

Recent foodborne outbreaks have linked infection by enterohemorrhagic Escherichia coli (EHEC) serotype O157:H7 to the consumption of contaminated lettuce. Contamination via food handler error and on-the-farm contamination are thought to be responsible for several outbreaks. Though recent studies have examined the application of EHEC to store-bought lettuce, little is known about the attachment of EHEC to growing plants. We investigated the association of lettuce seedlings with EHEC O157:H7 strains implicated in lettuce or fruit outbreaks using hydroponic and soil model systems. EHEC strains that express the green fluorescent protein were observed by stereomicroscopy and confocal laser scanning microscopy to determine adherence patterns on growing lettuce seedlings. Bacteria adhered preferentially to plant roots in both model systems and to seed coats in the hydroponic system. Two of five nonpathogenic E. coli strains showed decreased adherence to seedling roots in the hydroponic system. EHEC was associated with plants in as few as 3 days in soil, and contamination levels were dose-dependent. EHEC levels associated with young plants inoculated with a low dose suggested that the bacteria had multiplied. These data suggest that preharvest crop contamination via contaminated irrigation water can occur through plant roots.     

A genetic algorithm for the optimisation of assembly sequences

This paper describes a Genetic Algorithm (GA) designed to optimise the Assembly Sequence Planning Problem (ASPP), an extremely diverse, large scale and highly constrained combinatorial problem. The modelling of the ASPP problem, which has to be able to encode any industrial-size product with realistic constraints, and the GA have been designed to accommodate any type of assembly plan and component. A number of specific modelling issues necessary for understanding the manner in which the algorithm works and how it relates to real-life problems, are succinctly presented, as they have to be taken into account/adapted/solved prior to Solving and Optimising (S/O) the problem. The GA has a classical structure but modified genetic operators, to avoid the combinatorial explosion. It works only with feasible assembly sequences and has the ability to search the entire solution space of full-scale, unabridged problems of industrial size. A case study illustrates the application of the proposed GA for a 25-components product.