Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Fire safe,sustainable loose furnishing

The aim of this exploratory study has been to investigate the fire properties and environmental aspects of different upholstery material combinations, mainly for domestic applications. An analysis of the sustainability and circularity of selected textiles, along with lifecycle assessment, is used to qualitatively evaluate materials from an environmental perspective. The cone calorimeter was the primary tool used to screen 20 different material combinations from a fire performance perspective. It was found that textile covers of conventional fibres such as wool, cotton and polyester, can be improved by blending them with fire resistant speciality fibres. A new three‐dimensional web structure has been examined as an alternative padding material, showing preliminary promising fire properties with regard to ignition time, heat release rates and smoke production.     

In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

Effects of breed and age at slaughter on degradation of muscle lipids during processing of dry‐cured hams

Hams from Landrace, Duroc and Hampshire pigs slaughtered at ages 6, 7.5 and 9 months were processed to generate Norwegian Parma‐style hams. Lipid contents and the compositions of fatty acid classes (ΣSFA, ΣMUFA, ΣPUFA) within neutral lipids, phospholipids and free fatty acids were determined. Small differences in lipid degradation and composition of the classes were revealed. However, significant sensory differences related to lipids were observed. Breed was more important than age. Dry‐cured Hampshire hams gave a more intense mature odour that may be associated with higher overall lipid degradation. Unexpectedly, these hams also demonstrated high juiciness and tenderness, which could be related to the melting characteristics of the fat. Dry‐cured Duroc hams showed a higher susceptibility towards rancidity, presumably associated with preferential oxidation of n‐6 fatty acids relative to C18:1 n‐9. Dry‐cured Landrace hams showed the lowest juiciness and tenderness, likely due to their lower fat content (marbling).     

Single fundamental-mode output power exceeding 6 mW from VCSELs with a shallow surface relief

A single fundamental-mode output power of 6.5 mW was achieved from an 850-nm vertical-cavity surface-emitting laser (VCSEL) with a shallow surface relief, the highest single-mode power ever reported using this technique. The VCSELs were fabricated from epitaxial material grown to yield an antiphase reflection from the topmost layer. A circular surface relief, acting as a mode discriminator, was etched in the center to reduce the mirror loss for the fundamental mode. This "inverted" surface-relief technique offers relaxed etch depth control and, therefore, improves reproducibility and yield.     

Buchbesprechungen

Ohne Zusammenfassung     

A streamlined approximation and duality scheme for structural optimization

An efficient and commonly used approach to structural optimization is to solve a sequence of approximate design problems that are constructed iteratively. As is well-known, a major part of the computational burden of this scheme lies in the sensitivity analysis needed to state the approximate problems. We propose a possibility for reducing this burden by streamlining the calculations in a combined approximation and duality scheme for structural optimization. The difference between this scheme and the traditional one is that, instead of calculating all the constraint gradients to state an approximate design problem explicitly, linear combinations of these gradients are generated as they are needed during the solution of the approximate problem by the dual method. We show, by analysing some typical scenarios of problem characteristics, that this rearrangement of the calculations may be a computationally viable alternative to the traditional scheme. An advantage of streamlining the calculations is that there is no need to incorporate an active set strategy in the scheme, as is usually done, since all the design constraints may be taken into consideration without any loss of computational efficiency. This may, clearly, enhance the practical rate of convergence of the overall approximation scheme. Moreover, the proposed rearrangement of the calculations may make it computationally viable to apply iterative equation solvers to the structural analysis problem. Numerical results with direct as well as iterative equation solvers show that the streamlined scheme is a feasible and promising approach to structural optimization.     

Parabolic dish concentrators approximated by simple surfaces

Two different concentrating mirrors have been constructed that resemble parabolic dish reflectors. Both mirrors are made of slightly curved strips of flat, bendable material. The strips of the most simplified mirror have only large-radius circles and straight lines as boundaries. The necessary equations for making the mirrors are given. Also a simple way to make a stiff, lightweight frame and support for the mirror strips has been developed. Models of the mirrors have been built and successfully used for cooking and baking.     

Magnetic resonance imaging of disseminated sclerosis

Multiple sclerosis is a chronic demyelinating disease. Paraclinical examinations may contribute to the diagnosis of multiple sclerosis. Magnetic resonance imaging (MRI) has a very high sensitivity concerning multiple sclerosis, and has made it possible to visualize multiple sclerosis plaques in vivo, to follow each plaque over the course of time and in this way to obtain information about the pathogenesis. MRI has shown that the size of plaques may vary considerably, and that plaques are dynamic structures with the ability to change in size over few weeks. By using MRI and the contrast agent Gadolinium-DTPA, it is possible to distinguish a newly developed plaque from an older one. Therefore, MRI has become an important examination in therapeutic trials. Just now, MRI with Gadolinium-DTPA is being used to evaluate the efficacy of plasmapheresis and immunoglobulin treatment in a joint study between Rigshospitalet and Hvidovre Hospital.