New CAMAC based data acquisition and beam control system for Lund nuclear microprobe

A new CAMAC based data acquisition system has been installed at the Lund Nuclear Microprobe facility. This paper reports on the development and present status of the data acquisition system. The system is a true multiparameter CAMAC based system with fast Fera bus readout and in crate memory buffer. The user interface is based on Sparrow Kmax software for a Power Macintosh platform. The system read out and tag the event data with position on-line, which make fast on-line monitoring of spectra or element maps possible.Simultaneously, all data can be saved event by event for off-line analysis. The beam scanning part is software controlled through a timed D/A converter, this allows fast scanning of the beam. With a CCD-camera and video card the area to be analysed could be defined directly from the image, and the sample position can be moved. Any kind of irregular scan patterns could be defined.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Emission of excited potassium species from an industrial iron catalyst for ammonia synthesis

The angular dependence of potassium emission-desorption is studied from a fused iron catalyst of the type used for ammonia synthesis. The excited species (K^*, K _n ^* , etc.) and positive ions K⁺ have strongly different angular distributions. The bilobular distribution measured for ion desorption is concluded to be either due to excited atoms, so-called Rydberg atoms, or excited clusters. Both types of species have to desorb from the edges of the sample and become field ionized and deexcited just outside the sample, as reported in previous studies on an iron oxide catalyst. The peak in the normal direction measured for excited species is due to excited cluster formation outside the catalyst surface. Similarities with previous results for other catalysts are observed. The possibility that the promoter function of potassium in the ammonia synthesis is due to excited species is pointed out.On leave from Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Cracow, Poland.     

Sociomaterial actors in the assimilation gap: a case study of web service, management and IT-assimilation

This paper investigates the conditions for the assimilation of information systems (IS) and information technology (IT) in organizations and the influence of various actors in the organization and eBusiness context. To do so it draws on the literature on assimilation gap, sociomateriality and infrastructure together with a study of implementation and use of information and communication technology in and among organizations in a Swedish region. There were substantial investments in web infrastructure made on a regional level and the focus of this study is how the investments were transformed and assimilated in practices, relations and communication. Based on the empirical data from the case study, the paper extends the assimilation process into interplay among actors in organizations contexts. It describes organizations’ strategies for coping with their needs for information and the actors in these processes. Two categories of actors are identified, sensemaking and sensegiving actors, as most important in assimilation of IS/IT in organizations. A sociomaterial perspective gives guidance and a better understanding of the assimilation process in terms of knowledge and interpretative frames, and how assimilation involves identity construction and negotiations among sensemaking and sensegiving actors. The contribution of this paper is a better understanding of the context of assimilation and adaptation of IT in organizations’ business processes, and steps to be taken to improve readiness.     

Recent developments in large‐area photomasks for display applications

One of the most critical areas in the manufacturing process for FPD panels or shadow masks for CRTs is lithography. Most existing lithography technologies require high‐quality large‐area photomasks. The requirements on these photomasks include positioning accuracy (registration) and repeatability (overlay), systematic image quality errors (“mura” or display quality), and resolution (minimum feature size). The general trend toward higher resolution and improved performance, e.g., for TFT desktop monitors, has put a strong focus on the specifications for large‐area‐display photomasks. This article intends to give an overview of the dominant issues for large‐area‐display photomasks, and illustrates differences compared with other applications. The article will also present state‐of‐the‐art methods and trends. In particular, the aspects of positioning accuracy over large areas and systematic image‐quality errors will be described. New qualitative and objective methods have been developed as means to capture systematic image‐quality errors. Results indicating that errors below 25 nm can be found early in the manufacturing process is presented, thus allowing inspection for visual effects before the actual display is completed. Positioning accuracy below 400 nm (3 sigma) over 720 × 560 mm have been achieved. These results will in the future be extended up toward 1 × 1 m for generation 4 in TFT‐LCD production.     

Open Embedded Control

Embedded control devices today usually allow parameter changes, and possibly activation of different pre-implemented algorithms. Full reprogramming using the complete source code is not allowed for safety, efficiency, and proprietary reasons. For these reasons, embedded regulators are quite rigid and closed concerning the control structure. In several applications, like industrial robots, there is a need to tailor the low level control to meet specific application demands. In order to meet the efficiency and safety demands, a way of building more generic and open regulators has been developed. The key idea is to use pieces of compiled executable code as functional operators, which in the simplest case may appear as ordinary control parameters. In an object oriented framework, this means that new methods can be added to controller objects after implementation of the basic control, even at run-time. The implementation was carried out in industrially well accepted languages such as C and C++. The dynamic binding at run-time differs from ordinary dynamic linking in that only a subset of the symbols can be used. This subset is defined by the fixed part of the system. The safety demands can therefore still be fulfilled. Encouraged by results from fully implemented test cases, we believe that extensive use of this concept will admit more open, still efficient, embedded systems.     

Aliphatic 18F-Radiofluorination: Recent Advances in the Labeling of Base-Sensitive Substrates**

Aliphatic fluorine-18 radiolabeling is the most commonly used method to synthesize tracers for PET-imaging. With an increasing demand for ¹⁸F-radiotracers for clinical applications, new labeling strategies aiming to increase radiochemical yields of established tracers or, more importantly, to enable ¹⁸F-labeling of new scaffolds have been developed. In recent years, increased attention has been focused on the direct aliphatic ¹⁸F-fluorination of base-sensitive substrates in this respect. This minireview gives a concise overview of the recent advances within this field and aims to highlight the advantages and limitations of these methods.     

Re‐calibration of Engelmaier's Model for Leadless,Lead‐free Solder Attachments

In this paper, the solder attachment fatigue model created by Werner Engelmaier is re‐calibrated in order to make it applicable in conjunction with leadless, lead‐free solder attachments. Sn3.8Ag0.7Cu solder attached ball‐grid‐array components are addressed to three thermal cycling test profiles. Based on the results, both physical and statistical parameters are obtained and compared with the values relevant to tin–lead solder assemblies. The validity of the statistical distribution selection (two‐parameter Weibull) is studied. Acceleration factors correlating different test profiles are obtained, and they are found to be only weakly dependent on the test vehicle type. Copyright © 2006 John Wiley & Sons, Ltd.     

Emission control of nitrogen oxides in the oxy-fuel process

The interest in oxy-combustion as a method to capture carbon dioxide has increased drastically during recent years. The oxy-fuel process offers new process conditions and may take advantage of innovative techniques as well as of new ways to apply conventional measures for emission control. The present work reviews available techniques for controlling both the emission of nitrogen oxides (NO_x) to the atmosphere and the content of NO_x in the captured carbon dioxide. The results indicate that for a first generation of oxy-fuel power plants, conventional primary NO_x control should be sufficient to meet today's emission regulations, if based on emission per unit of fuel supplied. However, there are several opportunities for new methods of NO_x control in oxy-fuel plants, depending on future emission and storage legislation for carbon capture schemes. Improved understanding of the behaviour of nitric oxide and nitrogen dioxide during compression and condensation of carbon dioxide is needed, as well as improved knowledge on the influence of the parameters of oxy-combustion on nitrogen chemistry.