Use of Zebrafish Embryo Assay to Evaluate Toxicity and Safety of Bioreactor-Grown Exopolysaccharides and Endopolysaccharides from European Ganoderma applanatum Mycelium for Future Aquaculture Applications

Natural mycelial exopolysaccharide (EPS) and endopolysaccharide (ENS) extracted from bioreactor-cultivated European Ganoderma applanatum mushrooms are of potential high commercial value for both food and adjacent biopharmaceutical industries. In order to evaluate their potential toxicity for aquaculture application, both EPS (0.01–10 mg/mL) and ENS (0.01–10 mg/mL) extracts were tested for Zebrafish Embryo Toxicity (ZFET); early development effects on Zebrafish Embryos (ZE) were also analyzed between 24 and 120 h post-fertilization (HPF). Both EPS and ENS are considered non-toxic with LC₅₀ of 1.41 mg/mL and 0.87 mg/mL respectively. Both EPS and ENS did not delay hatching and teratogenic defect towards ZE with <1.0 mg/mL, respectively. No significant changes in the ZE heart rate were detected following treatment with the two compounds tested (EPS: 0.01–10 mg/mL: 176.44 ± 0.77 beats/min and ENS: 0.01–10 mg/mL: 148.44 ± 17.75 beats/min) compared to normal ZE (120–180 beats/min). These initial findings support future pre-clinical trials in adult fish models with view to safely using EPS and ENS as potential feed supplements for supplements for development of the aquaculture industry.     

Preparation and characterization of polyethylene/cellulose composite with diatomite and bentonite as fillers

ABSTRACT

This research work was carried out to examine the performance of different polyethylene/cellulose composites. The effect of three different factors was examined. First factor was the effect of clay type as filler, in which diatomite and bentonite were used. Second factor was the effect of cellulose grafting with cyclic oxymethylene. Third factor was the presence of polyethylene grafted with maleic anhydride (PE-g-MA) in the polymer matrix of polyethylene/cellulose as a compatibilizer. The polymer matrix was characterized by scanning electron microscope (SEM), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Tensile test and permeability were also examined.     

Flicker noise in gate overlapped polycrystalline silicon thin-filmtransistors

A study of the noise performance of gate overlapped polycrystalline silicon thin-film transistors (TFTs) is presented. Low-frequency noise measurements were carried out on n- and p-type samples fabricated by excimer laser crystallization. It is shown that the carrier number fluctuation model applies not only to n-type but also to p-type devices. The density of oxide traps was extracted from the noise measurements and was of the order of 10¹⁸-10¹⁹ eV^-1 cm^-3     

Influence of eccentricity on the frequency limitations of circular-pad via-holes

We study the influence of the technologically caused eccentricity of a circular-pad via-hole. We derive an eigenvalue equation using a rigorous method based on a linear transformation of the via-hole polar coordinates. The eigenvalue equation is used to compute the modal resonant frequencies and the modal fields of the eccentric via. It is shown that the via-hole misalignment shifts the modal frequencies and influences its frequency band. The proposed model is verified with published experimental data, and is also compared with results generated with the full-wave simulator Agilent Momentum-2002.     

Reliability‐based estimation of the survival of Listeria monocytogenes in chorizos

Reliability analysis is especially important when critical decisions are to be made involving potentially severe adverse consequences such as foodborne illness. Owing to uncertainty associated with the parameters controlling survival of Listeria monocytogenes in chorizo (a Mexican‐style sausage), the time needed to reduce the count by a certain number (n) of logs (t_nD) is probabilistic. In this paper the first‐order second‐moment (FOSM) method based on Taylor series expansion is used to derive the expected value and standard deviation of t_nD as function of the operating conditions (random variables) affecting survival, namely initial water activity (a_w0) of the sausage batter, storage temperature (T) and airflow velocity (F), along with their uncertainties characterised by their means and coefficients of variation. For any given n the derived t_nD probability distribution enables one to determine an estimate of t_nD for any desired level of reliability or confidence level, such as 50% (median value), 95%, 99%, etc. Among the conclusions drawn were: (i) the variability associated with T and F has a minor effect on estimating uncertainty in t_nD, whereas the reliability of t_nD estimation is greatly influenced by the uncertainty in a_w0; and (ii) the uncertainty in a_w0 has the greatest impact when a_w0 of the sausage formulation exceeds 0.90. The approach used and discussed in this paper can be applied to any survival/inactivation study to incorporate the effect of uncertainty in the various extrinsic and intrinsic parameters on the survival kinetics of the pathogen in a food system under evaluation. Copyright © 2006 Society of Chemical Industry     

What defense doesSchouwia purpurea (Cruciferae) have against the desert locust?

A field study of the food eaten by solitary desert locusts was carried out in a winter breeding area in Mauritania. The food eaten, determined by the plant epidermis found in fecal pellets, was compared to the plant's availability in the habitat.Schouwia purpurea, well represented in the diets, was dominant at the study site. Adults had a preference forTribulus terrester. Growth and feeding on these two plants were compared. The high water content ofS. purpurea leaves limited the dry matter eaten and slowed down growth. Glucosinolates were separated and quantified by gas chromatography. There are 132mol/g dry matter in green leaves. In multiple choice tests, with paper disks, glucosinolate extracts were phagostimulant at a low concentration (21mol/g dry matter) and repulsive at a higher one (214mol/ g dry matter). Biting behavior onS. purpurea was recorded and analyzed on video. The importance ofSchouwia purpurea in desert locust habitats and its defenses is discussed.     

Cryptanalysis of an embedded systems’ image encryption

Multimedia Tools and Applications - Recently, a new image encryption-scheme for embedded systems based on continuous third-order hyperbolic sine chaotic system, has been proposed. The...     

A logarithmic complexity divide-and-conquer algorithm for multi-flexible-body dynamics including large deformations

A new algorithm is presented for the modeling and simulation of multi-flexible-body systems. This algorithm is built upon a divide-and-conquer-based multibody dynamics framework, and it is capable of handling arbitrary large rotations and deformations in articulated flexible bodies. As such, this work extends the current capabilities of the flexible divide-and-conquer algorithm (Mukherjee and Anderson in Comput. Nonlinear Dyn. 2(1):10–21, 2007), which is limited to the use of assumed modes in a floating frame of reference configuration. The present algorithm utilizes the existing finite element modeling techniques to construct the equations of motion at the element level, as well as at the body level. It is demonstrated that these equations can be assembled and solved using a divide-and-conquer type methodology. In this respect, the new algorithm is applied using the absolute nodal coordinate formulation (ANCF) (Shabana, 1996). The ANCF is selected because of its straightforward implementation and effectiveness in modeling large deformations. It is demonstrated that the present algorithm provides an efficient and robust method for modeling multi-flexible-body systems that employ highly deformable bodies. The new algorithm is tested using three example systems employing deformable bodies in two and three spatial dimensions. The current examples are limited to the ANCF line or cable elements, but the approach may be extended to higher order elements. In its basic form, the divide-and-conquer algorithm is time and processor optimal, yielding logarithmic complexity O(log(N _b )) when implemented using O(N _b ) processors, where N _b is the number of bodies in the system.     

From big smartphone data to worldwide research: The Mobile Data Challenge

This paper presents an overview of the Mobile Data Challenge (MDC), a large-scale research initiative aimed at generating innovations around smartphone-based research, as well as community-based evaluation of mobile data analysis methodologies. First, we review the Lausanne Data Collection Campaign (LDCC), an initiative to collect unique longitudinal smartphone dataset for the MDC. Then, we introduce the Open and Dedicated Tracks of the MDC, describe the specific datasets used in each of them, discuss the key design and implementation aspects introduced in order to generate privacy-preserving and scientifically relevant mobile data resources for wider use by the research community, and summarize the main research trends found among the 100+ challenge submissions. We finalize by discussing the main lessons learned from the participation of several hundred researchers worldwide in the MDC Tracks.