Doped silicon and NIS junctions for bolometer applications

We discuss the performance, of a normal metal hot electron bolometer (NHEB) that we have measured at 0.3 K. We found that the noise equivalent power was limited by the amplifier noise. To improve the NHEB power response and to make it more robust and reliable we propose to substitute the normal metal with heavily doped silicon. The heavily doped silicon behaves like a metal with lower carrier concentration and has a smaller electron–phonon thermal coupling. We have fabricated superconductor-doped silicon-superconductor contacts (S-Sm-S) and we have used them as thermometers and coolers.     

Stress in Thin Films;Diffraction Elastic Constants and Grain Interaction

Untextured bulk polycrystals usually possess macroscopically isotropic elastic properties whereas for most thin films transvers isotropy is expected,owing to the limited dimenionlity .The usually applied models for the calculation of elstic constants of polycrystals from single crystal elastic contants(so-called grain interaction models)erroneously predict macroscopic isotropy for an(untextured) thin film.This paper presents a summary of recent work where it has been demonstrated for the first time by X-ray diffraction analysis of stresses in thin films that elastic grain interaction can lead to macroscopically anisotropic behaviour (shown by non-linear sin^2φ plots).A new grain interaction model,predictin the macroscopically anisotropic behaviour of thin films,is proposed.     

Neocytoapheresis in the treatment of polycythemia vera

In absence of thrombocytosis, periodic bloodlettings represent the elective therapy of polycythemia vera. In the present study we tested if neocytoapheresis, a method able to remove large quantities of younger, and then bigger red cells could represent an alternative therapeutic choice in these patients. We found that the employment of neocytoapheresis produced a remarkable delay in the time of procedures with a mean interval of 100 +/- 55 days. The mean value of hematocrit before neocytopheresis is resulted statistically different in comparison with the hematocrit after the procedure (p = 0.0001). The reticulocyte count is resulted higher in apheresis product in comparison with the blood control measured before procedure (p = 0.0001). In the same way, the mean corpuscular volume in the collection bags was higher than the volume measured before neocytoapheresis (p = 0.0095). We did not find any variation about the mean values of white blood cells and platelets before and after neocytoapheresis in the patients examined. These preliminary data seem to underline a better withdrawal of big size cells by this technique suggesting the efficacy of neocytoapheresis in the treatment of polycythemia vera.     

Scientific workflows for process mining: building blocks,scenarios, and implementation

Over the past decade process mining has emerged as a new analytical discipline able to answer a variety of questions based on event data. Event logs have a very particular structure; events have timestamps, refer to activities and resources, and need to be correlated to form process instances. Process mining results tend to be very different from classical data mining results, e.g., process discovery may yield end-to-end process models capturing different perspectives rather than decision trees or frequent patterns. A process-mining tool like ProM provides hundreds of different process mining techniques ranging from discovery and conformance checking to filtering and prediction. Typically, a combination of techniques is needed and, for every step, there are different techniques that may be very sensitive to parameter settings. Moreover, event logs may be huge and may need to be decomposed and distributed for analysis. These aspects make it very cumbersome to analyze event logs manually. Process mining should be repeatable and automated. Therefore, we propose a framework to support the analysis of process mining workflows. Existing scientific workflow systems and data mining tools are not tailored towards process mining and the artifacts used for analysis (process models and event logs). This paper structures the basic building blocks needed for process mining and describes various analysis scenarios. Based on these requirements we implemented RapidProM, a tool supporting scientific workflows for process mining. Examples illustrating the different scenarios are provided to show the feasibility of the approach.     

SPIDER: An availability-aware framework for the service function chain placement in distributed scenarios

The network function virtualization (NFV) paradigm replaces hardware-dependent network functions by virtual network functions (VNFs) that can be deployed in commodity hardware, including legacy servers. Consequently, the use of NFV is expected to reduce operating and capital expenses, as well as improve service deployment operation and management flexibility. For many use cases, the VNFs must be visited and invoked following a specific order of execution in order to compose a complete network service, named service function chain (SFC). Nonetheless, despite the benefits from NFV and SFC virtualization technologies, their introduction must not harm network performance and service availability. On the one hand, redundancy is seen by network service planners as a mechanism well established to combat availability issues. At same time, there is a goal to optimize resource utilization in order to reduce operational expenditure. In this article, we share our experience in the design use of a framework, named SPIDER, focused on SFC placement that considers the network infrastructure condition and the required SFC availability to define the placement strategy. The SPIDER monitors the status of infrastructure nodes and links and defines which servers the VNFs should be placed on and the number of redundant replicas needed. We present a proof-of-concept of SPIDER using Kubernetes to launch the VNFs as containers. We also use Kubernetes to forward the traffic between the VNFs, composing the service chain. We perform experiments to evaluate the runtime of SPIDER and the SFC delay under different network conditions.     

Decomposition of Al2TiO5-MgTi2O5 solid solutions: a thermodynamic approach

The decomposition of Al_1–x Mg _x Ti_1+x O₅ solid solutions with x=0.0, 0.1, 0.2, 0.4, 0.5 and 0.6 was studied in the temperature range 900–1175 °C using a 250 h annealing test. As x increases from 0–0.2 there is a strong stabilizing effect and the decomposition temperature decreases from 1280 °C (Al₂TiO₅) down to 1125 °C. For 0.2x0.5 the decomposition temperature does not decrease further. For x=0.6 no decomposition was observed. For x0.5 decomposition is complete or almost complete at 1000 °C; at 900 °C transformation is kinetically hindered and solid solutions with x=0.2 and 0.4 are unaffected by the thermal treatment. A relationship between the decomposition temperature and the parameter x has been derived using the regular solution model to describe the Al_2(1–x)Mg _x Ti_(1+x)O₅ solid solution.     

Interference Effects in Nanocrystalline Systems

Interference (cross-correlation) effects are present in the X-ray powder diffraction pattern of a polycrystalline aggregate. In an experimental diffraction pattern, the information is highly overlapped and can be confused with other effects. In this article, it is shown that the analysis of the patterns calculated from a cluster equilibrated via molecular dynamics simulation allows those effects to be separated. Extra intensity is observed, because of the presence of the grain boundaries contribution which is unexpectedly not that of an amorphous phase.     

E-recruiting and fairness: the applicant’s point of view

More and more companies currently recruit online, partly because of cost savings and competitive pressure, and partly because it is the best way to reach their target group of applicants. In our study, applicants’ perceptions of procedural fairness were examined in e-recruiting contexts. Using an adapted form of the Social Process Questionnaire on Selection, we found that 1,373 participants’ expectations regarding fairness were mediocre and always lower than the perceived importance of five procedural fairness aspects. Based on an experimental manipulation, we showed that feedback was particularly important in online application procedures, whereas participation had smaller effects. Furthermore, participants tend to rate procedural fairness for offline application procedures as fairer than for online procedures although they reported generally positive experiences with online applications in the past. Based on our results, we discuss practical implications and limitations.     

Survival and growth of Pseudomonas aeruginosa in natural mineral water: a 5-year study

A 5-year study was carried out on the growth curve of two strains of P. aeruginosa inoculated at a density of 10(2) cfu/ml into samples of natural mineral water with different levels of dissolved solids (TDS at 180 degrees C: 72.5 and 382 mg/l) and low organic content (TOC: 0.17 and 0.35 mg/l). The resulting growth curves were similar for both strains, with only slight differences depending on the different amounts of dissolved solids in the water. After 4-5 days counts were increased by 3 log units. This level was maintained until 70-100 days from inoculation, after which a slow decrease began, culminating in the death of one of the strains after 5 years. No difference in recovery was observed between the method using direct inoculation on Cetrimide Agar and the resuscitation technique (preincubation in Tryptone Soya Agar followed by inoculation on Cetrimide Agar) in the exponential phase of the growth curve. During the stationary and death phases, however, the enrichment technique gave statistically slightly higher counts than the selective technique, indicating the presence of damaged P. aeruginosa cells. The use of a resuscitation step when using Cetrimide Agar to assess bottled water quality is recommended.     

Una struttura bidimensionale per la memorizzazione dei file trasposti

In information retrieval systems storage occupancy is in general disregarded to take advantage in running time; in an environment in which retrieval time is not a primary requirement (this is the case of Data Base Machines), transposed files become a very interesting structure; in fact they allow a considerable space saving with respect to fast access structures, such as inverted files. But transposed files, in most cases, are not practicable, as theyare to be searched by a sequential scanning. In this paper a structure is defined to implement transposed files, called 2-B tree, which is a sort of two-dimensionalB-tree, and avoid sequential scanning; search in a trasposed file stored as a 2-B tree in π memory pages is 0 (π^1/2), while insertion and deletion are 0 (log_π). Moreover, 2-B tree organization can achieve an improvement in storage requirements up to 42% with respect to inverted file organization.