Embryotoxic doses of vitamin A to rabbits result in low plasma but high embryonic concentrations of all-trans-retinoic acid: risk of vitamin A exposure in humans

Retinoid pharmacokinetics were examined in plasma, placenta and embryos of gestational d 12 rabbits following application of an embryotoxic dosing regimen (10 mg retinyl palmitate/kg body wt per day from gestational d 7 to 12). Vehicle-treated or untreated rabbits served as controls. Physiological concentrations of all-trans-retinoic acid (all-trans-RA) and 13-cis-RA in rabbit plasma (5-8.33 nmol/L) were very close to the endogenous levels in human plasma. In addition, we identified endogenous all-trans-RA, 3,4-didehydroretinol and 3,4-didehydroretinoic acid in rabbit embryo. Following the last retinyl palmitate administration, apparent steady-state concentrations of all retinoids were reached in the examined compartments of rabbits. The major polar retinoid in plasma was 9, 13-di-cis-RA, but its embryonic concentrations were only about 6% of those in plasma. In the embryo, retinol and its esters were found at high concentrations; lower amounts of all-trans-4-oxo-RA and the newly identified 14-hydroxy-4, 14-retro-retinol could also be measured. Embryonic concentrations of all-trans-RA were about 100% higher than endogenous levels. The overall exposure of the embryo to this retinoid was, however, substantial. Embryonic area under the concentration time curve values strongly suggest that the embryotoxicity of the applied dosing regimen is mainly due to the action of all-trans-RA. A very remarkable finding of this study is the marginal increase of plasma concentrations of all-trans-RA over their endogenous levels, which is comparable to the human situation after vitamin A intake. This analogy indicates that high vitamin A intake may be associated with a higher risk for teratogenic effects in humans even in the absence of high elevation of plasma all-trans-RA levels.     

Synthesis, optical and morphological characterization of soluble main chain 1,3,4-oxadiazole copolyarylethers—potential candidates for solar cells applications as electron acceptors

New copoly(arylether)s containing substituted terphenyl, quinquephenyl, fluorene and anthracene moieties with aromatic 1,3,4-oxadiazole units were prepared and the resulting copolymers are soluble in common organic solvents. Investigation of their optical properties revealed that they emit blue and yellow light. Moreover, their photovoltaic response was studied in blends with poly(3-hexylthiophene) (P3HT) as the electron donor. Despite the low power conversion efficiencies it was shown that photo-induced electron transfer does take place and the performances are higher than a single layer P3HT device. In addition, an anthracene-fluorene-oxadiazole main chain copolymer (PAFOXD) was also examined in a single layer photovoltaic device and gave one of the highest reported open-circuit voltage (V_oc) values in the literature (0.89 V). Finally, a detailed morphological study of the blends and the PAFOXD surface using the atomic force microscopy (AFM) technique, revealed the effect of solvent selection to the preparation of thin films exhibiting the desired performance characteristics.     

Evaluation of hydrogen producing cultures using pretreated food waste

In order to enhance bio-hydrogen production from food waste, pretreatment methods are widely used. The influence of the initial pH and autoclaving were investigated in batch experiments. Fermentative studies showed that pure cultures like Clostridium beijerinckii could directly utilize raw food waste to produce hydrogen, while other cultures (Clostridium butyricum and Clostridium pasteurianum) could produce hydrogen only after pH adjustment. In this case, the optimal starting pH of the culture was found to be 7. Autoclaving could further enhance hydrogen yields due to increased hydrolysis of food waste. The maximum hydrogen yield was achieved by C. butyricum (38.9 mL-H₂/g-VS_added) after autoclaving food waste with pH adjustment at 7. In addition, the ratio acetic to butyric acid was decreased by autoclaving pretreatment, because butyrate metabolic pathway was favored in the fermentation process. However, suitable pH for bacteria growth and the low ammonia production could be achieved from autoclaving food waste.     

Synthesis and biological investigation of novel tricyclic benzodiazepinedione-based RGD analogues

Integrins, a widely expressed family of heterodimeric cell surface adhesion proteins, are expressed in a variety of cell types. They play a decisive role in cell-cell adhesion or cell to extracellular matrix adhesion events. Antagonists of alpha(v)beta(3) or alpha(IIb)beta(3) integrin may have a potential use in suppression of pathological processes. We present the synthesis of novel tricyclic benzodiazepinedione-based RGD analogues, which were subsequently tested in a solid-phase receptor assay in order to investigate their binding affinities towards alpha(v)beta(3) and alpha(IIb)beta(3) integrin.     

The implementation of the Water Framework Directive (WFD) at the river basin of Anthemountas with emphasis on the pressures and impacts analysis

The paper presents preliminary results of the Project LIFE04 ENV/GR/000099, related to the pressures and impacts analysis at the river basin of Anthemountas, located in Thermi, Thessaloniki, according to the provisions of Article 5 of the Water Framework Directive. The methodological approach developed and applied involves the determination of parameters related to point sources of pollution (e.g. population, industrial production, emission factors etc.) and non-point sources (e.g. agricultural) by using information on emission factors from the relevant activities in the area as well as geomorphological and hydrological conditions. Impact analysis requires the application of numerical approaches that will enable the prediction of key quality parameters, which, in combination with available monitoring data, can assist the evaluation of the likelihood that a water body will fail to meet the objectives of good status. Due to lack of biological indices, the evaluation is mostly based on chemical parameters and some eutrophication related biological indices such as algae. In the study area most of the pollution is related to agricultural practices and the predominant impacts are related to eutrophication and nitrates in the groundwater. It was concluded that only 10–15% of the water bodies can be identified as not being in danger of failing the good status objective.     

Deploying LiveWN Grids in the Greek School Network

A determinant factor for the introduction of grid technologies in production domains of scale can be the design of easy, fast and, from an operational point of view, realizable deployment procedures. Remote system management technologies, typically used to monitor and manage IT environments, are designed to offer remote software installation functionality that exhibits the aforementioned characteristics; however, previous work has shown that even valuable systems can fail to perform in heterogeneous, geographically distributed environments, especially if they are maintained by organizations affiliated to the public sector. The deployment of grid technologies throughout the Greek School Network can be achieved by combining OpenRSM, a novel open source solution capable to support usable, configurable, infrastructure management use cases in heterogeneous environments and LiveWN, a grid scavenging solution that integrates live technologies with gLite grids.     

Materials Selection for Semisolid Processing

The mechanical behavior of alloys in the semisolid state is very sensitive to the volume fraction of solid. In this paper, a simple criterion for processability in the semisolid range is introduced, based on the sensitivity of the volume fraction of solid with respect to minor temperature variations. In addition it is proposed that the processability in the semisolid state can be enhanced using microsegregated material.     

Electrochemical oxidation of stabilized landfill leachate on DSA electrodes

The electrochemical oxidation of stabilized landfill leachate with 2960 mg L(-1) chemical oxygen demand (COD) over a Ti/IrO(2)-RuO(2) anode was investigated in the presence of HClO(4) as the supporting electrolyte. Emphasis was given on the effect of electrolysis time (up to 240 min) and temperature (30, 60 and 80°C), current density (8, 16 and 32 mA cm(-2)), initial effluent's pH (0.25, 3, 5 and 6), HClO(4) concentration (0.25 and 1M) and the addition of NaCl (20 and 100mM) or Na(2)SO(4) (20mM) as source of extra electrogenerated oxidants on performance; the latter was evaluated regarding COD, total carbon (TC), total phenols (TPh) and color removal. Moreover, the anode was studied by scanning electron microscopy and cyclic voltammetry. The main parameters affecting the process were the effluent's pH and the addition of salts. Treatment for 240 min at 32 mA cm(-2) current density, 80°C and the pH adjusted from its inherent value of 0.25 (i.e. after the addition of HClO(4)) to 3 yielded 90% COD, 65% TC and complete color and TPh removal at an electricity consumption of 35 kWh kg(-1) COD removed. Comparable performance (i.e. 75% COD reduction) could be achieved without pH adjustment but with the addition of 100mM NaCl consuming 20 kWh kg(-1) COD removed.     

Fluorescent protein tomography scanner for small animal imaging

Microscopy of fluorescent proteins has enabled unprecedented insights into visualizing gene expression in living systems. Imaging deeper into animals, however, has been limited due to the lack of accurate imaging methods for the visible. We present a novel system designed to perform tomographic imaging of fluorescent proteins through whole animals. The tomographic method employed a multiangle, multiprojection illumination scheme, while detection was achieved using a highly sensitive charge-coupled device camera with appropriate filters. Light propagation was modeled using a modified solution to the diffusion equation to account for the high absorption and high scattering of tissue at the visible wavelengths. We show that the technique can quantitatively detect fluorescence with sub millimeter spatial resolution both in phantoms and in tissues. We conclude that the method could be applied in tomographic imaging of fluorescent proteins for in vivo targeting of different diseases and abnormalities.