Impact of variable frequency microwave and rapid thermal sintering on microstructure of inkjet-printed silver nanoparticles

The effect of thermal profile on microstructure is studied in the frame of thin films deposited by inkjet-printing technology. The role of sintering temperature and thermal ramp is particularly investigated. Fast heating ramps exhibit coarse grains and pores, especially when a hybrid microwave curing is performed. This enhanced growth is attributed to the quick activation of densifying sintering regimes without undergoing thermal energy loss at low temperature. Microstructural evolution of various sintered inkjet-printed films is correlated with electrical resistivity and with the Young’s modulus determined by nanoindentation. A strong link between those three parameters is highlighted during experiments giving credit to either a surface or a fully volumetric sintering, according to the process. Sintering is then mainly triggered by surface mass transfer or by grain boundary diffusion. Silver thin films with an electrical resistivity 4–5 times higher than the bulk, has been reached in a few minutes with a Young’s modulus of 38?GPa.     

Hyperbaric storage at and above room temperature of a highly perishable food

Hyperbaric storage at naturally variable room temperature (RT) conditions (18–21 °C) and above (30 °C) was evaluated as a possible new food preservation method, regardless of temperature. Preservation of watermelon juice (used as a case study of a highly perishable food) at RT and 5 °C at atmospheric pressure was compared to preservation under 100 MPa at RT. After 8 h of hyperbaric storage at 100 MPa, the initial microbial loads of the watermelon juice were reduced by 1 log unit for total aerobic mesophiles, and 1–2 log units for Enterobacteriaceae and yeasts and moulds, to levels of about 3 log units for the former and below the detection limit for the latter, and remained thereafter unchanged up to 60 h. Similar results were obtained at 30 °C at 100 MPa after 8 h. At atmospheric pressure at RT (24 h) and 30 °C (8 h), microbial levels were already above quantification limits and unacceptable for consumption. Furthermore, pressure attenuated the increase in titratable acidity verified at atmospheric pressure, but caused higher colour changes, especially a higher lightness and a lower browning degree. Post-hyperbaric storage at 5 °C revealed an extended shelf life, as an additional benefit of hyperbaric storage. These results show that hyperbaric storage is a very promising food preservation methodology.     

Coding repeat instability in the FLO11 gene of Saccharomyces yeasts

In Saccharomyces yeasts, the FLO11 gene encodes an adhesin involved in filamentation, invasive growth, flocculation and adherence to solid surfaces. In wild Saccharomyces flor yeasts, a particularly expanded FLO11 allele also confers to these yeasts the ability to float under stressing liquid environments. We report here that, under optimal laboratory conditions, the repeats domain of the FLO11 gene in these wild yeasts is extremely unstable. Changes in length in the FLO11 coding repeats domain affected Flo11p‐associated functions but, interestingly, some of these functions were affected more than others. Therefore, length variations in this single gene provide a combinatorial diversity, which may contribute to a very rapid adaptation to fluctuating environments. Functional analysis of contracted alleles indicated that buoyancy was not associated to FLO11 length. In contrast, this property depended on the different types of repetitive units found in this gene. Thus, not only variations in the number of intragenic repeats but also the abundance and/or distribution of the different repetitive units may have phenotypic and evolutionary implications. Copyright © 2009 John Wiley & Sons, Ltd.     

Pectin: A Long-Neglected Broad-Spectrum Antibacterial

First reported in the late 1930s and partly explained in 1970, the antibacterial activity of pectin remained almost ignored until the late 1990s. The concomitant emergence of research on natural antibacterials and new usages of pectin polysaccharides, including those in medicine widely researched in Russia, has led to a renaissance of research into the physiological properties of this uniquely versatile polysaccharide ubiquitous in plants and fruits. By collecting scattered information, this study provides an updated overview of the subtle factors affecting the behaviour of pectin as an antimicrobial. Less-degraded pectin extracted by acid-free routes, we argue in the conclusions, will soon find applications from new treatments for polymicrobial infections to use as an implantable biomaterial in tissue and bone engineering.     

Preservative Effect of a Previous High-Pressure Treatment on the Chemical Changes Related to Quality Loss in Frozen Hake (<Emphasis Type="Italic">Merluccius merluccius</Emphasis>)

The objective of this study was the quality loss inhibition of hake (Merluccius merluccius) during the frozen storage. For it, the effect of a previous high-pressure (HP) treatment (150–450 MPa for 2 min) was analysed throughout a 5-month storage at ? 10 °C. Quality changes were monitored by complementary chemical analyses. Inhibition (p < 0.05) of dimethylamine (DMA), free fatty acid (FFA), formaldehyde (FA), trimethylamine, total volatile amine and fluorescent compound (tertiary lipid oxidation compound) formation was concluded by previous pressure treatment according to the one-way ANOVA analysis. On the contrary, no effect (p > 0.05) on the K value, polyene index and formation of peroxides and thiobarbituric acid reactive substances was achieved. Additionally, a multifactor ANOVA test (pressure and frozen storage time effects; i.e. comparison among HP treatments) showed an inhibitory effect (p < 0.015) on DMA and FFA formation, this effect increasing with pressure level applied. This inhibitory effect on the formation of such molecules related to quality loss can be explained on the basis of the damage caused to different kinds of enzymes such as trimethylamine oxide demethylase, lipases and phospholipases, so that their activity during the subsequent frozen storage would decrease. The work here presented provides for the first time information concerning the employment of HP technology to inhibit the DMA, FA and FFA formation during the frozen storage of hake. Further research focussed on commercial frozen conditions (? 18 °C) and including sensory and nutritional aspects is foreseen.     

ProNet: A policy network environment

Network and business management convergence is seen as the next step towards harmonizing information technology resource allocation with target business goals. This paper proposes a management platform that starts at the specification of business targets in the form of policies and goes all the way to enforcing them in a next generation Quality of Service aware network. We specified both a policy language and a parser and also implemented procedures for mapping policies into underlying network mechanisms. Furthermore, case studies presented in this paper show performance results of network services controlled by such policies.     

A Robot Application for Marine Vessel Inspection

Seagoing vessels have to undergo regular inspections, which are currently performed manually by ship surveyors. The main cost factor in a ship inspection is to provide access to the different areas of the ship, since the surveyor has to be close to the inspected parts, usually within arm's reach, either to perform a visual analysis or to take thickness measurements. The access to the structural elements in cargo holds, e.g., bulkheads, is normally provided by staging or by “cherry‐picking” cranes. To make ship inspections safer and more cost‐efficient, we have introduced new inspection methods, tools, and systems, which have been evaluated in field trials, particularly focusing on cargo holds. More precisely, two magnetic climbing robots and a micro‐aerial vehicle, which are able to assist the surveyor during the inspection, are introduced. Since localization of inspection data is mandatory for the surveyor, we also introduce an external localization system that has been verified in field trials, using a climbing inspection robot. Furthermore, the inspection data collected by the robotic systems are organized and handled by a spatial content management system that enables us to compare the inspection data of one survey with those from another, as well as to document the ship inspection when the robot team is used. Image‐based defect detection is addressed by proposing an integrated solution for detecting corrosion and cracks. The systems' performance is reported, as well as conclusions on their usability, all in accordance with the output of field trials performed onboard two different vessels under real inspection conditions.     

Fabrication and characterization of iron oxide ceramic membranes for arsenic removal

Nanoscale iron oxide particles were synthesized and deposited on porous alumina tubes to develop tubular ceramic adsorbers for the removal of arsenic, which is an extremely toxic contaminant even in very low concentrations. Its natural presence affects rural and low-income populations in developing countries in Latin America and around the world, which makes it essential to develop a user-friendly, low energy demanding and low cost treatment technology. The fabricated ceramic membranes can be operated with minimal trans-membrane pressure difference and do not require pumping. The support tubes and final membrane have been characterized by surface area and porosity measurements, permeability tests and scanning electron microscopy (SEM) imaging. Arsenic concentrations were determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Due to its low cost and simple operation, the system can be applied as a point of use device for the treatment of arsenic contaminated groundwaters in developing countries.     

Kinetic study of controlled release of VPA and DPH antiepileptic drugs using biocompatible nanostructured sol–gel TiO<Subscript>2</Subscript>

Sol–gel TiO₂ porous matrix was used to host valproic acid (VPA) and phenytoin (DPH), which are commonly used as antiepileptic drugs. The addition of these drugs was carried out during the synthesis in the hydrolysis stage. In vitro short term kinetic studies on drug liberation showed that almost all samples followed a first order kinetics with the exception of one sample which had a linear behavior. High resolution electron microscopy revealed the existence of nanocrystalinity in all samples, however, electron diffraction patterns showed that some were predominantly amorphous while in others suggested a greater density of nanocrystals. NMR studies demonstrated that VPA was less mobile in a more crystalline TiO₂ matrix than when the TiO₂ is mainly amorphous. Some features of the kinetics of drug liberation are explained in terms of the competition between nanocrystallinity and drug content. The reservoirs were implanted by means of stereotactic surgery in Wistar rats in which epilepsy was previously induced following the Kindling model of epilepsy. The efficiency of the reservoirs was follow by electroencephalography (EEGs). In vivo studies revealed that a more crystalline sample was more effective in preventing further epileptic events than samples with a higher content of VPA but predominantly amorphous.     

Chemopreventive effect of dietary curcumin on inflammation‐induced colorectal carcinogenesis in mice

Scope: Curcumin is a polyphenol with a variety of pharmacologic effects. We evaluate the effect of dietary curcumin on the severity of repeated colitis‐associated colorectal cancer. Methods and results: Six‐week‐old C57BL/6 mice were randomized into two dietary groups: standard diet and curcumin at 0.6% diet. The mice were exposed to 15 cycles of 0.7% dextran sodium sulphate for 1 week followed by distilled water for 10 days. After curcumin diet, the disease activity index presented a statistical reduction in the last cycles, macroscopic tumors were not seen and the microscopic study showed minor neoplasic lesions with respect to standard diet‐group. β‐Catenin translocation to the cytoplasm and/or nucleus was observed in the tumor tissue, but this translocation and its intensity were significantly minor in the curcumin diet‐DSS animals. Cytokines as tumor necrosis factor‐α and IFN‐γ were significantly diminished in DSS‐animals fed with curcumin. Conversely, non‐modification of p53 expression was observed and cyclo‐oxygenase‐2 and inducible nitric oxide synthase were significantly reduced in the curcumin diet‐DSS group. Conclusion: We demonstrate the protective/preventive effect of curcumin in the progression of colorectal cancer associated to colitis, which was correlated with a lowered immunoreactivity of ß‐catenin, a non‐modification of p53 expression, a reduction of proinflammatory cytokine levels and a decrease of inflammatory protein overexpression.