Reducing the complexity of distance measurement methods for circular turbo codes that use structured interleavers

The knowledge of turbo code's minimum Hamming distance (d_min) and its corresponding codeword multiplicity (A_min) is of a great importance because the error correction capability of a code is strongly tied to the values of d_min and A_min. Unfortunately, the computational complexity associated with the search for d_min and A_min can be very high, especially for a turbo code that has high d_min value. This paper introduces some useful properties of turbo codes that use structured interleavers together with circular encoding. These properties allow for a significant reduction of search space and thus reduce significantly the computational complexity associated with the determination of d_min and A_min values. © 2014 The Authors. International Journal of Communication Systems published by John Wiley & Sons, Ltd.     

Effects of irradiation in combination with waxing on the essential oils in orange peel

The study evaluated the effects of waxing, irradiation dose and post‐irradiation storage time on the essential oils in orange peel. Mature oranges (Maroc late) waxed or unwaxed were treated with 1 or 2 kGy radiation and stored for 9 weeks at 20 °C and 40–50% RH. Essential oils from the peel were extracted and analysed by GC. Results showed that D ‐limonene was significantly lower in waxed oranges; levels in samples treated with 2 kGy were higher than those in non‐irradiated or treated with 1 kGy. Linalool, methyl anthranilate and 3,7‐dimethyl‐2,6‐octadienal decreased as the dose increased. Levels of linalool increased with storage time but D ‐limonene was unaffected. These results may aid in guaranteeing the quality of orange essential oils during storage time. Copyright © 2004 Society of Chemical Industry     

Influence of thermal boundary conditions on natural convection in a square enclosure partially heated from below

Natural convection in air-filled 2D square enclosure heated with a constant source from below and cooled from above is studied numerically for a variety of thermal boundary conditions at the top and sidewalls. Simulations are performed for two kinds of lengths of the heated source, i.e., a small and a large source corresponding to 20% and 80% of the total length of the bottom wall, respectively. The Rayleigh number varied from 10³ to 10⁷. Results are presented in the form of streamline and isotherm plots as well as the variation of the Nusselt number and maximum temperature at the heat source surface. Comparisons among the different thermal configurations considered are reported.     

Phlebotomus papatasi sand fly salivary gland lysate down-regulates a Th1, but up-regulates a Th2, response in mice infected with Leishmania major

A vertebrate host becomes infected with Leishmania major when the sand fly vector injects parasites into skin along with saliva. Previous studies showed that salivary gland lysate of the New World sand fly Lutzomyia longipalpis markedly enhanced L. major infection in CBA mice. However, L. major is an Old World parasite transmitted in nature by the Old World sand fly Phlebotomus papatasi. Here we examine the ability of P. papatasi salivary gland lysate to enhance infection (lesion size and parasite burden) by L. major. In addition, we examine the effects of salivary gland lysate on the immune response to L. major by monitoring the levels of cytokine mRNA from the lymph nodes draining cutaneous lesions. We found that P. papatasi salivary gland lysate dramatically exacerbated lesion development in disease-resistant CBA mice. This exacerbation of disease correlated with inhibition of the production of Thl cytokines and associated factors (IFN-gamma, IL-12, and inducible nitric oxide synthase), but with enhancement of the Th2 cytokine IL-4, whereas no changes in the levels of IL-10 and TGF-beta were noted. Importantly, salivary gland lysate directly up-regulated expression of IL-4 mRNA in mice in the absence of infection with L. major.     

Kinetics of non-congruent dissolution of E-glass fiber in saturated calcium hydroxide solution

The kinetics of non-congruent dissolution of long E-glass fiber in saturated calcium hydroxide solution has been investigated at 25°C in a closed reactor adopting the rotating disc method for the sample holder. The fiber dissolution rate (), measured from the relative loss weight of the fiber after selective dissolution of the attack layer in acetic acid, is a linear function of time, what implies an interfacial dissolution process. However, the kinetics does not stay regular for a long time due to local detachment of the attack layer. The comparison between = f (t) and ′ = f (t) curves, where ′ is the formation rate of the attack layer, shows that the formation of the layer does not only imply the deposit of a bad-crystalline hydrated calcium silicate but the nucleation and growth of solid calcium hydroxide and calcium carbonate resulting from the transfert, to the interface, of ions coming from the liquid phase. This phenomenon was precedently observed by some other authors in the case of glass-fiber reinforced cement matrix.     

Metallic Conductive Nanowires Elaborated by PVD Metal Deposition on Suspended DNA Bundles

Metallic conductive nanowires (NWs) with DNA bundle core are achieved, thanks to an original process relying on double‐stranded DNA alignment and physical vapor deposition (PVD) metallization steps involving a silicon substrate. First, bundles of DNA are suspended with a repeatable process between 2 µm high parallel electrodes with separating gaps ranging from 800 nm to 2 µm. The process consists in the drop deposition of a DNA lambda‐phage solution on the electrodes followed by a naturally evaporation step. The deposition process is controlled by the DNA concentration within the buffer solution, the drop volume, and the electrode hydrophobicity. The suspended bundles are finally metallized with various thicknesses of titanium and gold by a PVD e‐beam evaporation process. The achieved NWs have a width ranging from a few nanometers up to 100 nm. The electrical behavior of the achieved 60 and 80 nm width metallic NWs is shown to be Ohmic and their intrinsic resistance is estimated according to different geometrical models of the NW section area. For the 80 nm width NWs, a resistance of about few ohms is established, opening exploration fields for applications in microelectronics.     

First-order indicators for the estimation of discrete fractures in porous media

Faults and geological barriers can drastically affect the flow patterns in porous media. Such fractures can be modelled as interfaces that interact with the surrounding matrix. We propose a new technique for the estimation of the location and hydrogeological properties of a small number of large fractures in a porous medium from given distributed pressure or flow data. At each iteration, the algorithm builds a short list of candidates by comparing fracture indicators. These indicators quantify at the first order the decrease of a data misfit function; they are cheap to compute. Then, the best candidate is picked up by minimization of the objective function for each candidate. Optimally driven by the fit to the data, the approach has the great advantage of not requiring remeshing, nor shape derivation. The stability of the algorithm is shown on a series of numerical examples representative of typical situations.     

Mining frequent conjunctive queries in relational databases through dependency discovery

We present an approach for mining frequent conjunctive in arbitrary relational databases. Our pattern class is the simple, but appealing subclass of simple conjunctive queries. Our algorithm, called Conqueror $^+$ , is capable of detecting previously unknown functional and inclusion dependencies that hold on the database relations as well as on joins of relations. These newly detected dependencies are then used to prune redundant queries. We propose an efficient database-oriented implementation of our algorithm using SQL and provide several promising experimental results.     

Genetic algorithms optimized fuzzy logic control for the maximum power point tracking in photovoltaic system

This paper presents an intelligent control method for the maximum power point tracking (MPPT) of a photovoltaic system under variable temperature and irradiance conditions. First, for the purpose of comparison and because of its proven and good performances, the perturbation and observation (P&O) technique is briefly introduced. A fuzzy logic controller based MPPT (FLC) is then proposed which has shown better performances compared to the P&O MPPT based approach. The proposed FLC has been also improved using genetic algorithms (GA) for optimisation. Different development stages are presented and the optimized fuzzy logic MPPT controller (OFLC) is then simulated and evaluated, which has shown better performances.     

Study of cyanoethylated alfa fiber reinforced composites by dynamic mechanical analysis

Cyanoethylation of long alfa fibers was studied, and these chemically modified fibers were used to manufacture alfa-polyester composites. The dynamic mechanical thermal properties of an unsaturated polyester resin (cured) and of composites of unmodified and chemically modified alfa-polyester were studied using a dynamic mechanical analyzer over a wide temperature range. The data suggest that in spite of the fragility of the cyanoethylated alfa fibers compared to the unmodified ones, both unmodified and modified alfa-polyester composites manifest the same order of mechanical properties: T_g, tan δ and E′ values are very near in the two cases. Fragility of fibers is compensated by the better interfacial bond between the fibers and the matrix. The scanning electron micrographs of the fracture surface of the samples reveal the improved bonding at the interface between the cyanoethylated fiber and the polyester resin. The article is published in the original.