Characterization of the specificities of human blood group H gene-specified alpha 1,2-L-fucosyltransferase toward sulfated/sialylated/fucosylated acceptors: evidence for an inverse relationship between alpha 1,2-L-fucosylation of Gal and alpha 1,6-L-fucosylation of asparagine-linked GlcNAc

The assembly of complex structures bearing the H determinant was examined by characterizing the specificities of a cloned blood group H gene-specified alpha 1,2-L-fucosyltransferase (FT) toward a variety of sulfated, sialylated, or fucosylated Gal beta 1,3/4GlcNAc beta- or Gal beta 1,3GalNAc alpha-based acceptor structures. (a) As compared to the basic type 2, Gal beta 1,4GlcNAc beta-(K(m) = 1.67 mM), the basic type 1 was 137% active (K(m) = 0.83 mM). (b) On C-6 sulfation of Gal, type 1 became 142.1% active and type 2 became 223.0% active (K(m) = 0.45 mM). (c) On C-6 sulfation of GlcNAc, type 2 showed 33.7% activity. (d) On C-3 or C-4 fucosylation of GlcNAc, both types 1 and 2 lost activity. (e) Type 1 showed 70.8% and 5.8% activity, respectively, on C-6 and C-4 O-methylation of GlcNAc. (f) Type 1 retained 18.8% activity on alpha 2,6-sialylation of GlcNAc. (g) Terminal type 1 or 2 of extended chain had lower activity. (h) With Gal in place of GlcNAc in type 1, the activity became 43.2%. (i) Compounds with terminal alpha 1,3-linked Gal were inactive. (j) Gal beta 1,3GalNAc alpha- (the T-hapten) was approximately 0.4-fold as active as Gal beta 1,4GlcNAc beta-. (k) C-6 sulfation of Gal on the T-hapten did not affect the acceptor activity. (l) C-6 sulfation of GalNAc decreased the activity to 70%, whereas on C-6 sulfation of both Gal and GalNAc the T-hapten lost the acceptor ability. (m) C-6 sialylation of GalNAc also led to inactivity. (n) beta 1,6 branching from GalNAc of the T-hapten by a GlcNAc residue or by units such as Gal beta 1, 4GlcNAc-, Gal beta 1,4(Fuc alpha 1,3)GlcNAc-, or 3-sulfoGal beta 1,4GlcNAc- resulted in 111.9%, 282.8%, 48.3%, and 75.3% activities, respectively. (o) The enhancement of enzyme affinity by a sulfo group on C-6 of Gal was demonstrated by an increase (approximately 5-fold) in the K(m) for Gal beta 1,4GlcNAc beta 1,6(Gal beta 1,3)GalNAc alpha-O-Bn in presence of 6-sulfoGal beta 1,- 4GlcNAc beta-O-Me (3.0 mM). (p) Among the two sites in Gal beta 1, 4GlcNAc beta 1,6(Gal beta 1,3) GalNAc alpha-O-Bn, the enzyme had a higher affinity ( > 3-fold) for the Gal linked to GlcNAc. (q) With respect to Gal beta 1,- 3GlcNAc beta-O-Bn (3.0 mM), fetuin triantennary asialo glycopeptide (2.4 mM), bovine IgG diantennary glycopeptide (2.8 mM), asialo Cowper's gland mucin (0.06 mM), and the acrylamide copolymers (0.125 mM each) containing Gal beta 1,3GlcNAc beta-, Gal beta 1,3(6-sulfo)GlcNAc beta-, Gal beta 1,3GalNAc alpha-, Gal beta 1,3Gal beta-, or Gal alpha 1,3Gal beta- units were 153.6%, 43.0%, 6.2%, 52.5%, 94.9%, 14.7%, 23.6%, and 15.6% active, respectively. (r) Fucosylation by alpha 1,2-L-FT of the galactosyl residue which occurs on the antennary structure of the bovine IgG glycopeptide was adversely affected by the presence of an alpha 1,6-L-fucosyl residue located on the distant glucosaminyl residue that is directly attached to the asparagine of the protein backbone. This became evident from the 4-fold activity of alpha 1,2-L-FT toward bovine IgG glycopeptide after approximately 5% removal of alpha 1,6-linked Fuo.     

Oxygen-enrichment of YBa2Cu3 YBa2Cu3O7-δ using the fluidization techniqueusing the fluidization technique

The oxygen-deficient phase of the highT _c superconductor, YBa₂Cu₃O₇, was oxygen-enriched using the fluidization technique to give good superconducting properties. The normal method of oxygen treatment at 900°C for 24 h and at 600°C for 24 h has been reduced to just one treatment at 600°C for 12 h by the fluidization technique to achieve almost the same strength of superconducting signal for the YBa₂Cu₃O₇ powder, which establishes the attractiveness of the latter route for the large-scale preparation of superconducting material. The particle sizes were in the range 0–90, 90–180 and 180–420 μm. The fluidized particles were crystalline with orthorhombic distortion.T _c ^onset , estimated using the a.c. magnetic susceptibility method, was 91·3 K. The volume fraction of superconducting material in the product was 83·7–85·3%, one of the highest values reported so far for YBa₂Cu₃O₇.     

Phase diagram modeling for titanium alloys with light element impurities

It is well known that low levels of light element impurities, such as oxygen and nitrogen, can significantly modify phase equilibria in conventional titanium alloys. However, although the role of nitrogen and oxygen as alpha stabilizers is well established, little quantitative work exists in ternary and higher order systems. Moreover the effect of such elements on equilibria with phases other than cx-and P-Ti is often unknown. The problems in measuring light elements at the microscopic level adds to the difficulty of establishing partitioning, and old axioms are often transferred to new alloys with little evidence that they are applicable. As part of a current program on titanium alloys, phase diagram modeling has been performed for a variety of titanium alloys with additions of oxygen and nitrogen. This paper presents results for the system Ti-Al-V-O-(N,C) with particular reference to the O additions to the commercially important alloy Ti-6A1-4V. This paper was presented at the International Phase Diagram Prediction Symposium sponsored by the ASM/MSD Thermodynamics and Phase Equilibria Committee at Materials Week, October 21–23,1991, in Cincinnati, OH. The symposium was organized by John Morral, University of Connecticut, and Philip Nash, Illinois Institute of Technology.     

Characterization of surface micromachined metallic microneedles

The purpose of the paper is to provide quantitative characterization of metallic microneedles. Mechanical and fluid flow experiments were performed to evaluate the buckling force, the penetration force, and the pressure versus flow rate characteristics of the microneedles. The microneedle design variations characterized included varying the shaft lengths, varying the tip taper angles/geometries, and the inclusion of micromechanical barbs. The penetration force was found to range from 7.8 gF for a microneedle of shaft length 500 /spl mu/m, to 9.4 gF for a length of 1500 /spl mu/m, both with a tip taper angle of 30/spl deg/. Microneedles with a linear tip taper angle of 30/spl deg/ penetrated 95 +% of the time without failure. The microneedles with a 15/spl deg/ and 20/spl deg/ linear tip taper penetrated 10% and 25% of the time, respectively. The buckling force was found to be 98.4 gF for a 500 /spl mu/m long microneedle shaft, 72.3 gF for a needle of shaft length 1000 /spl mu/m, and 51.6 gF for a 1500 /spl mu/m long shaft. The results demonstrate that the penetration force was 7.9% of the buckling force for 500 /spl mu/m long shafts, 11.6% for a 1000 /spl mu/m long shaft, and 18.2% for a 1500 /spl mu/m long microneedle shafts. The microneedle fluid flow characteristics were studied. An inlet pressure of 49.0 Pa was required for a flow rate of 1000 /spl mu/L/h and 243.0 Pa for a flow rate of 4000 /spl mu/L/h using air as the fluid medium. For water, an average pressure of 30.0 kPa was required for a flow rate of 1000 /spl mu/L/h and 106.0 kPa for a flow rate of 4000 /spl mu/L/h.     

Nodal ant colony optimization for solving profit based unit commitment problem for GENCOs

This paper proposes a nodal ant colony optimization (NACO) technique to solve profit based unit commitment problem (PBUCP). Generation companies (GENCOs) in a competitive restructured power market, schedule their generators with an objective to maximize their own profit without any regard for system social benefit. Power and reserve prices become important factors in decision process. Ant colony optimization that mimics the behavior of ants foraging activities is suitably implemented to search the UCP search space. Here a search space consisting of optimal combination of binary nodes for unit ON/OFF status is represented for the movement of the ants to maintain good exploration and exploitation search capabilities. The proposed model help GENCOs to make decisions on the quantity of power and reserve that must be put up for sale in the markets and also to schedule generators in order to receive the maximum profit. The effectiveness of the proposed technique for PBUCP is validated on 10 and 36 generating unit systems available in the literature. NACO yields an increase of profit, greater than 1.5%, in comparison with the basic ACO, Muller method and hybrid LR-GA.     

Modulated microstructures inβ Cu-Zn-Al

β Cu-Zn-Al samples with different surface orientations have been examined by electron microscopy and diffraction. The nature of the modulated microstructure or tweed and the accompanying diffuse streaking has been studied. Tweed in samples without surface martensite is confirmed to be a subsurface phenomenon, and the diffuse streaking is attributed to both dynamic and static {110} displacement waves. The image contrast in samples with surface martensite is shown to be determined essentially by the surface martensite features and probably tweed in the surface martensite. Possible reasons for the observed tweed are discussed. Formerly at Division Metales, Centro Atómico Bariloche, Argentina.     

Magnetic and mössbauer studies on ductile Fe-Cr-Co permanent magnet alloys

Iron-chromium-cobalt alloys possess attractive magnetic properties combined with good formability and hence are identified as technologically important magnetic materials. Alloys with compositions Fe-28·9 Cr-15·6 Co and Fe-28·4 Cr-20·1Co (weight percent) have been studied. Heat-treatment parameters during thermomagnetic treatment viz temperature, time and external magnetic field were optimized with reference to magnetic properties. The fully treated anisotropic alloys develop remanence=11·5–12·0 kilo Gauss, coercivity=600–650 Oersted and energy product=4–4·5 million Gauss Oersted. Electron microscopic and Mössbauer spectroscopic techniques were used to identify the original and transformed phases. During the various stages of the development of the alloy, the changes in mechanical hardness were correlated with magnetic hardness.     

Ubiquitin-Specific Protease 29 Regulates Cdc25A-Mediated Tumorigenesis

Cell division cycle 25A (Cdc25A) is a dual-specificity phosphatase that is overexpressed in several cancer cells and promotes tumorigenesis. In normal cells, Cdc25A expression is regulated tightly, but the changes in expression patterns in cancer cells that lead to tumorigenesis are unknown. In this study, we showed that ubiquitin-specific protease 29 (USP29) stabilized Cdc25A protein expression in cancer cell lines by protecting it from ubiquitin-mediated proteasomal degradation. The presence of USP29 effectively blocked polyubiquitination of Cdc25A and extended its half-life. CRISPR-Cas9-mediated knockdown of USP29 in HeLa cells resulted in cell cycle arrest at the G0/G1 phase. We also showed that USP29 knockdown hampered Cdc25A-mediated cell proliferation, migration, and invasion of cancer cells in vitro. Moreover, NSG nude mice transplanted with USP29-depleted cells significantly reduced the size of the tumors, whereas the reconstitution of Cdc25A in USP29-depleted cells significantly increased the tumor size. Altogether, our results implied that USP29 promoted cell cycle progression and oncogenic transformation by regulating protein turnover of Cdc25A.     

Performance of floating cum tilted-wick type solar still with the effect of water flowing over the glass cover

A simple transient performance of floating cum tilted-wick type solar still has been presented by incorporating the effects of water flowing over a glass cover, heat capacity of tilted-wick water surface and floating-wick water surface. Explicit expressions for flowing water, glass, tilted-wick water surface and floating-wick water surface temperature and efficiency of the system have been derived. Numerical calculations have been carried out for a typical day in the month of March 2004. The relative standard deviations between the numerical and experimental results of different temperature components of the proposed still have been found. The results indicate that the relative standard deviations between theoretical and experimental results are less than 8% (glass cover), 2% (tiltedwick water surface), 1% (floating-wick water surface) and 2% (flowing water at the lower end of the glass cover) an average for the working hours of the day. Moreover, based on the numerical results, the following conclusions have been drawn: (i) glass cover temperature decreases significantly; (ii) the effect of water flowing over the glass cover has a fascinating effect on the production of distillate output during peak sunny hours; (iii) water flow rate of 1.5 m/s is optimum, and beyond it the efficiency decreases. Experimental investigations have been performed at Sri Ramakrishna Mission Vidyalaya College of Arts and Science, Coimbatore, India.