The Simulation of Impact Loads on Beam-type Structures using a Pseudo-dynamic Procedure

Abstract:  This study proposes an alternate method for the analysis of beams with solid cross-section or built as a framed structure and subjected to transverse impact loads from an external striker. The procedure used in the analysis is a combination of two essential tools using pseudo-dynamic techniques. The method reported here involves only one degree of freedom for the structure modelling and assumes an elastic contact between an external striker and the beam structure, which in reality does not happen. As only one degree of freedom is considered in the analysis, some important limitations are inherent to the method proposed here. Essentially, there is the difficulty of modelling the displacement field associated with the transient structure behaviour accurately, as a consequence of fast-rate impact loads. Another difficulty faced by the method refers to a local structure behaviour associated with contact loads. The present method can deal with large displacements in transversely loaded beams associated to a collapse mechanism having a simple geometry and defined with precision from a single parameter. This ensures reasonable accuracy in the evaluation of the strain energy absorbing capacity of transversely impacted beam structures using a single degree of freedom model in a pseudo-dynamic procedure.     

Strength of short concrete columns confined with CFRP sheets

The confinement of concrete columns provided by carbon fibre reinforced plastic (CFRP) sheets can be an efficient technique for their structural strengthening. The principal advantages of this technique are the high strength-to-weight ratio, good fatigue properties, non-corroding characteristics of the CFRP, and the facility of its application. An experimental research program, that included tests on 54 short column specimens, was carried out to investigate the gain in strength and ductility of concrete columns externally confined by CFRP wrapping. The variables studied were the column cross section shape (circular, square and rectangular) and the amount of confinement expressed in the number of CFRP sheet layers applied to the models (one or two layers). On the basis of the obtained results, equations were proposed to calculate the confined concrete strength and the ultimate confined concrete strain as a function of the confining lateral stress for each of the cross section geometry used, circular, square and rectangular. The estimations given by these equations and by those from formulas encountered in the literature were compared with the experimental ones and general conclusions were, finally, drawn.

---

Résumé Le confinement de colonnes de béton assuré par des feuilles de plastique renforcé par des fibres de carbone (CFRP) peut être une technique efficace pour leur comportement structural. Les principaux avantages de cette technique sont la haute relation résistance-poids, des bonnes propriétés de fatigue, les caractéristiques non-corrosives du CFRP, et la facilité de leur application. Un programme expérimental comprenant des essais sur 54 colonnes courtes fut entrepris en vue de déterminer le gain de résistance et de ductilité de colonnes en béton confinées sur le plan externe en les recouvrant de feuilles de CFRP. Les variables étudiées étaient la forme de la section transversale (circulaire, carrée et rectangulaire), et la quantité de renforcement, mesurée par le nombre de feuilles de CFRP appliquées aux modèles (une ou deux couches). En prenant comme base les résultats obtenus, des équations ont été proposées pour calculer la résistance du béton confiné et sa déformation spécifique ultime en fonction de la contrainte latérale de confinement, pour chaque forme de section transversale utilisée, circulaire, carrée et rectangulaire. Les estimations données par ces équations et celles données par des formules trouvées dans la litérature ont été comparées avec les résultats expérimentaux et des conclusions générales ont finalement été établies.

     

Streptococcus bovis bacteremia: unusual complications

Streptococcus bovis bacteremia is known to be related to neoplastic lesions of the colon. We describe a patient with several complications of S bovis bacteremia and adenocarcinoma of the colon--endocarditis, spondylodiskitis, and splenic abscess. We believe this is the eighth known case of endocarditis and diskitis caused by S bovis and the third case of endocarditis and splenic abscess by S bovis in a patient with adenocarcinoma of the colon.     

Synthesis method for testable electrical networks using 1st order building blocks

This work presents a method for synthesizing testable continuous-time linear time-invariant electrical networks using 1st order blocks for the implementation of analog linear circuits. A functional-structural fault model for the block, and a fault dictionary are proposed together with a simple set of test vectors. The method allows, also, the fault grade evaluation for the modeled faults. The results obtained from the two application examples have shown the suitability of the approach as a design for test method for analog circuits.     

Localization by immunoelectron microscopy of Schistosoma mansoni antigens in the glomerulus of the hamster (Mesocricetus auratus) kidney

Gene therapy has the potential to provide cancer treatments based on novel mechanisms of action with potentially low toxicities. This therapy may provide more effective control of loco-regional recurrence in diseases such as non-small cell lung cancer (NSCLC), as well as systemic control of micrometastases. Despite current limitations, retroviral and adenoviral vectors can in certain circumstances provide an effective means of delivering therapeutic genes to tumour cells. Although multiple genes are involved in the process of carcinogenesis, mutations of the p53 gene are the most frequent abnormality identified in human tumours. Pre-clinical studies both in vitro and in vivo have shown that restoration of p53 function can induce apoptosis in cancer cells. Phase I clinical trials now show that p53 gene replacement therapy is feasible and safe using both retroviral and adenoviral vectors, and that it induces tumour regression in patients with advanced NSCLC and recurrent head and neck cancer. Other pre-clinical studies indicate that gene therapy may have useful synergy with cytotoxic and radiation therapy. This paper describes the different gene therapy strategies under investigation and the pre-clinical data that provides a rationale for the gene replacement approach, reviews clinical trial data and presents novel ideas for improving current vectors and gene delivery to tumours.     

Natural and induced tolerance in an immune network model

It has been proposed that the immune system can be partitioned into central and peripheral immune systems. Recently, Carneiro et al. (1996a, b) proposed a network, model incorporating B and T lymphocytes that explicitly accounts for that partition. This model however, had some limitations that are tackled here. Two main changes were introduced: the average idiotypic connectivity is now an explicit function of time based on empirical evidence; and the activation of T lymphocytes by antigen is described by a log-bell shaped dose response curve. The new model, which also accounts for the CIS and PIS distinction, shows more reasonable results since the frequencies of tolerant, immune or autoimmune responses to an antigen are now correct. The model provides a new interpretation for tolerance induction during the neonatal period, and for the adult tolerance by low or high doses of antigen. It predicts that natural tolerance for antigens available during the neonatal period can be kept indefinitely upon their removal, while tolerance induced in the adult stages is rapidly lost upon transient removal of the antigen. A semiquantitative analysis of the model provides a simple explanation for the different results in terms of the frequency at which a limited set of canonical connectivity structures emerge during ontogenesis.     

Optimization of the grapes reception process

Neural Computing and Applications - Grapes reception is a key process in wine production. The harvest days are extremely challenging days in managing the reception of the grapes, as the winery...     

Modification of porous copolymers network based on acrylonitrile

Summary The preparation of a chelating ion-exchange network based on acrylonitrile was carried out by chemical modification with hydroxylamine. The beads of resin were synthesized by aqueous suspension copolymerization of acrylonitrile (AN), styrene (STY) and divinylbenzene (DVB). The influence of diluent used in the suspension polymerization on the structure of the resulting copolymers was evaluated. The diluents employed were heptane (HEP), toluene (TOL) and anisole (ANI). It was found that the AN incorporation into copolymer structure was dependent on the diluent used. Conversion of nitrile groups into the amidoxime was conducted by treatment with hydroxylamine under alkaline solution. The resins were characterized by apparent density, surface area, average pore diameter, elemental analysis (CHN), FTIR and optical microscopy. Based on the results obtained, it was possible to control the porosity by diluent employed in the synthesis and to modify chemically a resin containing nitrile groups by hydroxylamine reaction. Received: 6 October 2001/Revised version: 2 April 2002/ Accepted: 11 April 2002