(BaTiO3)1-x + (Co0.5Ni0.5Nb0.06Fe1.94O4)x nanocomposites: Structure,morphology, magnetic and dielectric properties

Two phase-based nanocomposites consisting of dielectric barium titanate (BaTiO₃ or BTO) and magnetic spinel ferrite Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄ (CNNFO) have been synthesized through solid state route. Series of (BaTiO₃)_1-x + (Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄)_x nanocomposites with x content of 0.00, 0.25, 0.50, 0.75, and 1.00 were considered. The structure has been examined via X-rays diffraction (XRD) and indicated the occurrence of both perovskite BTO and spinel CNNFO phases in various nanocomposites. A phase transition from tetragonal BTO structure to cubic structure occurs with inclusion of CNNFO phase. The average crystallites size of BTO phase decreases, whereas that for the CNNFO phase increases with increasing x in various nanocomposites. The morphological observations revealed that the porosity is highly reduced, and the connectivity between grains is enhanced with increasing x content. The optical properties have been investigated by UV−vis diffuse reflectance spectroscopy. The deduced band gap energy (E_g) value is found to reduce with increasing the content of spinel ferrite phase. The magnetic as well as the dielectric properties were also investigated. The analysis showed that CNNFO ferrite phase greatly affects the magnetic properties and dielectric response of BTO material. The obtained findings can be useful to enhance the performances of magneto-dielectric composite-based systems.     

Electrical and Dielectric Properties of Y<Superscript>3+</Superscript>-Substituted Barium Hexaferrites

In this study, Y³⁺ ion-substituted M-type barium hexaferrites (BaM; BaFe₁₂O₁₉) were fabricated via facile ceramic route. As-prepared powders were characterized by X-ray powder diffractometry (XRD), Fourier transform infrared (FT-IR) spectroscopy, and impedance spectroscopy. XRD (Rietveld) analyses confirmed the presence of a single characterization of all samples (except x = 0.0 and 0.1 samples). The crystallite sizes of products are found in the range of 47.2–63.2 nm. Spectral analysis (FT-IR) also presented the formation of spinel structure for all products. The ac conductivity of the substituted samples was found to initially decrease slightly with increase in Y³⁺ compared with unsubstituted, and then variation tendency changes at the medium substitution ranges are observed with a different attitude against temperature. In the end, the lower conductivity for high substitutions is recorded and increases as functions of frequency while it also increases with the elevation of temperature. It was observed that ac conductivities of products increased by increasing frequency which indicate that observed ac conductivity is due to both electronic and polaron hopping mechanism.     

MedicoPort: a medical search engine for all

We present a new next generation domain search engine called MedicoPort. MedicoPort is a medical search engine designed for the users with no medical expertise. It is enhanced with the domain knowledge obtained from Unified Medical Language System (UMLS) to increase the effectiveness of the searches. The power of the system is based on the ability to understand the semantics of web pages and the user queries. MedicoPort transforms a keyword search into a conceptual search. Through our system we present a topical web crawling technique and indexing techniques empowered by the semantics information. MedicoPort aims to generate maximum output with semantic value using minimum input from the user. Since MedicoPort is designed to help people seeking information about health on the web, our target users are not medical specialists who can effectively use the special jargon of medicine and access medical databases. Medical experts have the advantage of shrinking the answer set by expressing several terms using medical terminology. MedicoPort provides the same advantage to its users through the automated use of the medical domain knowledge in the background. The results of our experiments indicate that, expanding the queries with domain knowledge, such as using the synonyms and partially or contextually relevant terms from UMLS, increase dramatically the relevance of an answer set produced by MedicoPort and the number of retrieved web pages that are relevant to the user request.     

Synthesis and Characterization of PEG-Sr Hexaferrite by Sol–Gel Conversion

Sr-M-type hexagonal ferrites have been prepared via a sol?Cgel route, and the effects of addition of different molecular weight polyethylene glycol (PEG) into the sol solutions on the static magnetic properties and particle morphology have been studied. Crystalline phases of the samples were determined by XRD analysis. FT-IR and TG analyses were used to prove the presence of PEG on SrFe₁₂O₁₉. The results showed that adding PEG with different molecular weight into the sol solutions affected the formation mechanism of SrFe₁₂O₁₉. Sr-M precursors prepared by various PEG types show different magnetic behaviors after pre-calcination at 150?^°C. This discrepancy is explained by the formation of a different phase during the synthesis of SrM particles.     

Structural and Magnetic Properties of Triethylene Glycol Stabilized Monodisperse Fe3O4 Nanoparticles

In this present study, a facile synthetic route was developed to prepare super-paramagnetic Fe₃O₄ MNPs directly via a one-pot approach. In this synthesis, only one iron containing compound and instead of high-boiling-point solvents, water-soluble tetraethylene glycol (TEG) was used as both the solvent and surfactant to control the particle growth and to prevent the aggregation of particles. Crystallite, particle, and magnetic core size are in good agreement with each other. The VSM measurement shows the superparamagnetic property of the product. The existence of TEG layer on the surface of the Fe₃O₄ nanoparticles was confirmed by Fourier transform infrared spectroscopy and thermal gravimetric analysis. The monodisperse morphology of the product was presented via TEM analysis. Due to the monodisperse morphology, superparamagnetic property, and small particle size, the product may have a potential application in biomedical research field.     

AC susceptibility and FC-ZFC magnetic properties of SrTb_xFe_(12-x)O_(19) and SrTm_xFe_(12-x)O_(19) hexaferrites:a comparative study

In this comparative study,Tb and Tm substituted Sr-hexafe rrites(HFs) with the chemical compositions of SrTb_xFe_(12-x)O_(19) and SrTm_xFe_(12-x)O_(19)(x=0.00,0.02 and 0.04) were fabricated via citrate sol-gel approach.The AC susceptibility and FC-ZFC magnetization were investigated.The product structure and morphologies were also investigated via XRD,TEM and SEM along with EDX.Measurements of temperature dependence of magnetization M-T and AC magnetic susceptibility versus temperature were carried out.The various synthesized HFs displayed ferrimagnetic behavior within 10-325 K.At lower temperatures,super-spin glass-like behavior was noticed.Neel-Arrhenius and Vogel-Fulcher models were employed to explore the experimental data of AC susceptibility.     

Synthesis and characterization of polypropiolate sodium (PPNa)-Fe3O4 nanocomposite

Polypropiolate sodium (PPNa)-Fe₃O₄ nanocomposites were successfully synthesized by the precipitation of Fe₃O₄ in the presence of sodium polypropiolate and followed by reflux route. Structural, morphological, electrical and magnetic properties evaluation of the nanocomposite were performed by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), vibrating scanning magnetometry (VSM) and conductivity measurements. Crystalline phase was identified as magnetite with an average crystallite size of 7 ± 3 nm as estimated from X-ray line profile fitting. Particle size estimated from TEM, by log-normal fitting, is ∼9 ± 1 nm. FT-IR analysis shows that the binding of PPNa on the surface of iron oxide is through bidentate linkage of carboxyl group. TGA analysis showed the presence of 20% PPNa around 80% magnetic core (Fe₃O₄)…PPNa-Fe₃O₄ nanocomposite show superparamagnetic characteristics at room temperature. It is found that the a.c. conductivity of the nanocomposites obeys the well-known power law of frequency in which it also depends on temperature. Additionally, its d.c. conductivity showed that two operating regions of the activation energy. Both real and imaginary parts of either permittivity exhibit almost the same attitudes which are the indication of the same ability in the stored energy, and dissipation of energy within the PPNa and PPNa-Fe₃O₄ nanocomposites.     

AC susceptibility and hyperfine interactions of vanadium substituted barium nanohexaferrites

Vanadium ions substituted BaFe₁₂O₁₉ nanohexaferrites, BaFe_12-xV_xO₁₉ (0.0?≤x?≤?0.1), were produced through the sol-gel auto-combustion route. The structure, morphology and the elemental compositions of various products were examined using X–ray powder diffraction, scanning electron microscopy coupled with EDX and EDS elemental mapping. These techniques confirmed the formation of the desired Ba-nanohexaferrite phases. The crystallites size was found to be 55–58?nm range for all products. The magnetic properties of BaFe_12-xV_xO₁₉ nanohexaferrites were investigated by Mossbauer spectroscopy, ZFC-FC magnetizations and AC susceptibility. The evolutions in the values of hyperfine magnetic field, isomer shift, quadrupole splitting, and line width were deduced via Mossbauer analysis. The experiments of ZFC and FC magnetizations indicated that no blocking temperature is observed in the temperature interval 2–400?K, which signals the typical ferromagnetic (FM) behavior for the produced nanohexaferrites. A super-spin glass like behavior is noticed at lower temperatures. The experiments AC susceptibility confirmed that the strength of magnetic interactions is enhanced for lower content of V³⁺ (x?=?0.02). For higher amount of V³⁺, the magnetic interactions are weakened. The obtained results are mainly accredited to the substitutions of Fe³⁺ ions by V³⁺ ions.