Infiltration and Top Seed Growth-Textured YBCO Bulks With Multiple Holes

The recently reported hole-patterned YBa₂Cu₃O _y (Y123) bulks with improved superconducting properties are highly interesting from material quality and application variety points of view. It is well known that the core of plain bulk superconductors needs to be fully oxygenated and some defects like cracks, pores, and voids must be suppressed in order that the material can trap a high magnetic field or carry a high current density. To minimize the above defects, we have used a combination of standard superconducting ceramic processing and an infiltration technique to prepare regularly perforated YBa₂Cu₃O _y (Y123) bulk superconductors. This process leads to negligible shrinkage upon annealing and a uniform distribution of Y211 inclusions. Texture was evidenced by neutron pole figure measurements. Flux mapping was used to verify the superconducting homogeneity of the samples and to investigate the field-trapping ability. In addition, the textured drilled samples were reinforced using resin or metal impregnation and the influence of the different processing steps on the hardness of the materials has been investigated.     

HColonies: a new hybrid metaheuristic for medical data classification

Medical data feature a number of characteristics that make their classification a complex task. Yet, the societal significance of the subject and the computational challenge it presents has caused the classification of medical datasets to be a popular research area. A new hybrid metaheuristic is presented for the classification task of medical datasets. The hybrid ant–bee colonies (HColonies) consists of two phases: an ant colony optimization (ACO) phase and an artificial bee colony (ABC) phase. The food sources of ABC are initialized into decision lists, constructed during the ACO phase using different subsets of the training data. The task of the ABC is to optimize the obtained decision lists. New variants of the ABC operators are proposed to suit the classification task. Results on a number of benchmark, real-world medical datasets show the usefulness of the proposed approach. Classification models obtained feature good predictive accuracy and relatively small model size.     

Circle-criterion Based Nonlinear Observer Design for Sensorless Induction Motor Control

This paper deals with the design of a nonlinear observer for sensorless induction motor control. Based upon the circle criterion approach, a nonlinear observer is designed to estimate pertinent but unmeasurable state variables of the considered induction machine for sensorless control purpose. The observer gain matrices are computed as a solution of linear matrix inequalities(LMI) that ensure the stability conditions of the state observer error dynamics in the sense of Lyapunov concepts. Measured and estimated state variables can be exploited to perform a state feedback control of the machine system. The simulation results are presented to illustrate the effectiveness of the proposed approach for nonlinear observer design.     

A CAD tool for an array of differential oscillators coupled through a broadband network

A new expression of the equations describing the locked states of two oscillators coupled through a resistor is presented in this article. This theory has led to the elaboration of a CAD tool which provides, in a short simulation time, the frequency locking region of two coupled differential oscillators. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Influence of secondary source technologies and energy management strategies on Energy Storage System sizing for fuel cell electric vehicles

Fuel cell electric vehicles (FCEVs) have some limitation which make them less competitor to thermal ones and delay their commercialization. The most important problems as the range, the durability and the cost depend directly on the energy storage problematic issues. In this context, this work presents an optimal sizing methodology for an Energy Storage System (ESS) composed by a fuel cell and an assistant source to supply a lightweight vehicle with 700 km driving range. Firstly, a comparative study between single and hybrid source is carried out to show the benefits of hybridization according to the range in terms of weight, cost and fuel consumption. Moreover, in order to improve the hybrid source characteristics, three technologies of the secondary source are tested and evaluated to be chosen for hybridization with fuel cell system purposes. Furthermore, the influence of three Energy Management Strategies (EMSs) on ESS sizing is studied where an optimal strategy provides the most favorable dimensions of the hybrid system. Simulation results give us the best technology needed for hybridization and allow us adopting the optimal management strategy to design the hybrid source. Finally, in order to show the influence of the driving cycles on the ESS design, a comparison study using the New European Driving Cycle “NEDC” and the Assessment and Reliability of Transport Emission Models Inventory Systems (ARTEMIS) confirms that there is a slow influence of the driving cycle on the ESS sizes.     

Tamoxifen derivatives for delivery of the antitumoral (DACH)Pt group: selective synthesis by McMurry coupling,and biochemical behaviour

The goal of our study was to potentiate the effects of the ((R,R)-trans-1,2-diaminocyclohexane)-platinum(II) fragment [(DACH)Pt], known for its cytotoxic properties, either with tamoxifen (Tam), the most widely used antiestrogen in the treatment of hormone-dependent breast cancers, or with its active metabolite hydroxytamoxifen (hydroxy-Tam). We coupled Tam or hydroxy-Tam derivatives bearing a malonato group at the para position of the beta aromatic ring with the (DACH)Pt fragment. The malonato-Tam and malonato-hydroxy-Tam compounds were prepared through McMurry coupling of the appropriate ketones. The presence of the malonate group resulted in a pronounced stereospecificity in the reaction, since malonato-Tam was obtained only as the Z isomer, while malonato-hydroxy-Tam was obtained as an 80/20 E/Z mixture. Attribution of the isomeric structures was achieved by 2D NMR spectroscopy. The platinum complexes (DACH)Pt-malonato-Tam and (DACH)Pt-malonato-hydroxy-Tam were then prepared by coupling the barium salts derived from the malonato-Tam and malonato-hydroxy-Tam with the nitrate derived from (DACH)PtCl(2). Study of the biochemical properties of these two platinum complexes showed that, while the hydroxy-Tam complex is satisfactorily recognized by the estrogen receptor (relative binding affinity, RBA=6.4 %), the Tam complex is less well recognized (RBA=0.5 %). The effects of these complexes on two hormone-dependent breast cancer cell lines (MCF7 and MVLN) were studied in vitro. Both complexes showed an antiproliferative effect on MCF7 cells, and an antiestrogenic effect on MVLN cells. The observed effects appear to be essentially antihormonal, since incorporation of the (DACH)Pt fragment into the tamoxifen skeleton did not cause an increase in the cytotoxicity of the complexes.     

A noise-robust front-end for distributed speech recognition in mobile communications

This paper investigates a new front-end processing that aims at improving the performance of speech recognition in noisy mobile environments. This approach combines features based on conventional Mel-cepstral Coefficients (MFCCs), Line Spectral Frequencies (LSFs) and formant-like (FL) features to constitute robust multivariate feature vectors. The resulting front-end constitutes an alternative to the DSR-XAFE (XAFE: eXtended Audio Front-End) available in GSM mobile communications. Our results showed that for highly noisy speech, using the paradigm that combines these spectral cues leads to a significant improvement in recognition accuracy on the Aurora 2 task.     

Crack deflection at an interface of alumina/metal joint: A numerical analysis

Deflection of a crack at the bimaterial interface is the initial mechanism required for obtaining enhanced toughness in bimaterial system. In this paper, a criterion is presented to predict the competition between crack deflection and penetration at the interface, using an energy release rate criterion. The finite element methods are used to calculate the strain energy release rates at the crack tip of alumina–metal bimaterial that either deflect or penetrate at the interface as a function of elastic mismatch and length of the deflected or penetrated crack. The effects of the elastic properties of two bonded materials were highlighted in order to evaluate the conditions for the crack deflection by the interface as well as the distance between the crack tip and the interface.