Pretreatment of Highly Polluted Pharmaceutical Waste Broth by Wet Air Oxidation

The preoxidation of a highly polluted waste pharmaceutical fermentation broth using wet air oxidation (WAO) has been studied as a possible method for the effective removal of organics. The applied (pre)treatment method should enhance the biotreatability of the pharmaceutical fermentation broth in terms of reduced initial toxicity and higher biodegradability. Preliminary experiments in the pilot biological treatment plant were successful only at low organic loads, whereas the system collapses at higher ones. The characterization of the fermentation broth was started by common physicochemical analysis, whereas several bioassays were used to determine its impact on biological treatment plants and the environment. Toxicity prior to and after WAO was determined using the acute Vibrio fischeri test, measurement of inhibition of O2 consumption, and the Daphnia magna acute test. Ready biodegradability of the treated and untreated broth has also been assessed. WAO experiments were accomplished in the 2?L batch reactor at different temperatures (240/280°C) and operating pressures. WAO experiments confirmed reduction of the toxicity toward microorganisms, whereas oxidized wastewater was more toxic to daphnids. Biodegradability of the oxidized broth has also been enhanced. Further work has been focused on designing appropriate combination of WAO and biological processes.     

Automatic playlist generation based on tracking user’s listening habits

Algorithms for automatic playlist generation solve the problem of tedious and time consuming manual selection of musical playlists. These algorithms generate playlists according to the user’s music preferences of the moment. The user describes his preferences either by manually inputting a couple of example songs, or by defining constraints for the choice of music. The approaches to automatic playlist generation up to now were based on examining the metadata attached to the music pieces. Some of them took also the listening history into account. But anyway, a heavy accent has been put on the metadata, while the listening history, if it was used at all, had a minor role. Missings and errors in metadata frequently appear, especially when the music is acquired from the Internet. When the metadata is missing or wrong, the approaches proposed so far cannot work. Besides, entering constraints for the playlist generation can be a difficult activity. In our approach we ignored the metadata and focused on examining the listening habits. We developed two simple algorithms that track the listening habits and form a listener model—a profile of listening habits. The listener model is then used for automatic playlist generation. We developed a simple media player which tracks the listening habits and generates playlists according to the listener model. We tried the solution with a group of users. The experiment was not a successful one, but it threw some new light on the relationship between the listening habits and playlist generation.     

How Cancer Cells Invade Bladder Epithelium and Form Tumors: The Mouse Bladder Tumor Model as a Model of Tumor Recurrence in Patients

Non-muscle-invasive bladder cancer is the most common form of bladder cancer. The main problem in managing bladder tumors is the high recurrence after the transurethral resection of bladder tumors (TURBT). Our study aimed to examine the fate of intravesically applied cancer cells as the implantation of cancer cells after TURBT is thought to be a cause of tumor recurrence. We established an orthotopic mouse bladder tumor model with MB49-GFP cancer cells and traced them during the first three days to define their location and contacts with normal urothelial cells. Data were obtained by Western blot, immunolabeling, and light and electron microscopy. We showed that within the first two hours, applied cancer cells adhered to the traumatized epithelium by cell projections containing α3β1 integrin on their tips. Cancer cells then migrated through the epithelium and on day 3, they reached the basal lamina or even penetrated it. In established bladder tumors, E-cadherin and desmoplakin 1/2 were shown as feasible immunohistochemical markers of tumor margins based on the immunolabeling of various junctional proteins. Altogether, these results for the first time illustrate cancer cell implantation in vivo mimicking cellular events of tumor recurrence in bladder cancer patients.     

Mechanism of ZrTiO4 Synthesis by Mechanochemical Processing of TiO2 and ZrO2

High-energy ball milling initiates a solid-state reaction in an equimolar mixture of TiO₂ and ZrO₂. The first stage of ball milling induced the transformation of anatase TiO₂ to high-pressure phase TiO₂ (II), isostructural with ZrTiO₄. The formation of solid solutions monoclinic ZrO₂/TiO₂ and TiO₂ (II)/ZrO₂ was observed in the intermediate stage. Afterward, a nanosized ZrTiO₄ phase was formed in the milled product from the TiO₂ (II)/ZrO₂ solid solution. The sintering of the milled product at a temperature <1100°C was examined in situ by Raman spectroscopy. The full solid-state reaction toward ZrTiO₄ ceramic is completed at a temperature considerably lower than reported in the literature.     

BiFeO3 Ceramics: Processing,Electrical, and Electromechanical Properties

Bismuth ferrite (BiFeO₃), a perovskite material, rich in properties and with wide functionality, has had a marked impact on the field of multiferroics, as evidenced by the hundreds of articles published annually over the past 10 years. Studies from the very early stages and particularly those on polycrystalline BiFeO₃ ceramics have been faced with difficulties in the preparation of the perovskite free of secondary phases. In this review, we begin by summarizing the major processing issues and clarifying the thermodynamic and kinetic origins of the formation and stabilization of the frequently observed secondary, nonperovskite phases, such as Bi₂₅FeO₃₉ and Bi₂Fe₄O₉. The second part then focuses on the electrical and electromechanical properties of BiFeO₃, including the electrical conductivity, dielectric permittivity, high‐field polarization, and strain response, as well as the weak‐field piezoelectric properties. We attempt to establish a link between these properties and address, in particular, the macroscopic response of the ceramics under an external field in terms of the dynamic interaction between the pinning centers (e.g., charged defects) and the ferroelectric/ferroelastic domain walls.     

Electronic interaction research 1988 – 2012 through the lens of the Bled eConference

Electronic interaction (EI) depends on technological capabilities that have only become available during the last quarter-century. The Bled eConference has straddled this period. A review of the conference’s successive themes, and of the corpus of over 1,000 papers presented at the 25 events to date, reveals three major Eras, referred to in this paper as the EDI, eCommerce and eInteraction Eras. A trace of the developments in the diverse array of EI technologies and EI-technologies-in-use shows that researchers have focussed very heavily on economic concerns, and until recent years did so almost to the exclusion of social concerns. The paper proposes that EI research needs to seek better balances between organisational and human needs. In addition, because of the instability of bleeding-edge phenomena, empirical research is being published too late to deliver much value to practitioners. The prevailing expectations of journals that rigour be pursued at all costs means that the relevance of research to the real world has become a quite secondary concern to many academics. The EI literature is accordingly at risk of following the IS literature more generally into a closed enclave, in which academics talk to one another and no-one else. Key precepts for an alternative research philosophy are proposed.     

Determination of rock type and moisture content in flysch using TLS intensity in the Elerji quarry (south-west Slovenia)

Bulletin of Engineering Geology and the Environment - Terrestrial laser scanning (TLS) was performed in tectonically undisturbed flysch in the Elerji quarry (south-west Slovenia), which represents...     

Simultaneous oxidation of aromatic compounds using Sr-doped lanthanum manganites as catalysts

Strontium-doped lanthanum manganites, La_1-xSr_xMnO₃ (LSMO), are promising and affordable catalysts for oxidative degradation of volatile organic compounds. LSMO catalysts (x = 0, .1, .2, and .3) were prepared by the citrate-nitrate autocombustion (CNA) and coprecipitation synthesis. The phase composition was confirmed by X-ray diffraction and Rietveld refinement analysis, while the oxygen content was determined by Mohr's salt permanganate titration. Morphology and porosity of prepared catalysts was correlated to catalytic oxidation of benzene, toluene, ethylbenzene and o-xylene. It was observed that both synthesis methods yielded catalysts of similar average pore size diameter and specific surface area, but the pore size distribution differed: CNA-prepared catalysts had a multimodal pore size distribution, while the coprecipitated ones had a single maximum at 4 nm. Catalysts prepared by the CNA method have shown a higher catalytic activity in the temperature range 373–723 K, as the presence of Mn³⁺/Mn⁴⁺ mixed valences increased their reducibility.     

Simultaneous Enhancement of Fracture Toughness and Unipolar Strain in Pb(Zr,Ti)O3‐ZrO2 Composites Through Composition Adjustment

The influence of second phase zirconia particles on the electrical properties and fracture behavior of various polycrystalline soft Pb(Zr_1?xTi_x)O₃ (PZT) compositions was investigated. PZT composites with yttria‐stabilized tetragonal zirconia particles exhibited enhanced crack resistance in comparison to monolithic compositions, regardless of the PZT composition. The addition of zirconia, however, was found to change the PZT composition through the diffusion of zirconium, resulting in variations in the observed piezoelectric and ferroelectric responses. Through the tailoring of the PZT matrix composition, the large electromechanical response and enhanced fracture toughness could be retained. The variation in both small and large signal properties is contrasted to fracture results and crystal structure changes, as determined by X‐ray diffraction.