Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

Bioavailability and Toxicity of Metal Nutrients during Anaerobic Digestion

This paper investigates the effect of chelating agents on the bioavailability of Fe and Cu during anaerobic digestion. The results on metal speciation and methane production in anaerobic serum bottles showed that biomass was able to grow in the presence of citrate 1?mM and nitrilotriacetic acid (NTA) 1?mM, suggesting that the binding sites at the cell surface competed efficiently for the metals with the chelating agents added. The presence of free ethylenediaminetetraacetic acid 1?mM inhibited methanogenesis, and this seemed to be related to a loss in metal uptake capacity. Although the addition of soluble microbial products (SMP) did not change metal distribution in anaerobic systems, it caused an increase in the rate of methane production, and it is believed that direct uptake of Cu-SMP complexes was responsible for this increase. The best protection against Cu toxicity occurred when stoichiometric amounts of NTA, which should complex and solubilize most of the Cu, was added, and it is likely that NTA prevented lethal concentrations of Cu from being adsorbed onto the cell and hence internalized.     

Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.     

Three-dimensional fracture simulation with a single-domain,direct boundary element formulation

An efficient hypersingular boundary integral equation method for three-dimensional fracture mechanics was presented in a previous paper. The details of the numerical implementation of this method are further discussed herein. In particular, an algorithm for achieving the required differentiability of the crack surface displacement function is discussed. To illustrate the utility of the method, computational results for several strongly interacting multiple-crack geometries are presented. The calculated stress intensity factors are in excellent agreement with those obtained by an approximate analytical method due to Kachanov and Laures.     

Investigations of high-performance GaAs solar cells grown on Ge-Si/sub 1-x/Ge/sub x/-Si substrates

High-performance p/sup +//n GaAs solar cells were grown and processed on compositionally graded Ge-Si/sub 1-x/Ge/sub x/-Si (SiGe) substrates. Total area efficiencies of 18.1% under the AM1.5-G spectrum were measured for 0.0444 cm/sup 2/ solar cells. This high efficiency is attributed to the very high open-circuit voltages (980 mV (AM0) and 973 mV (AM1.5-G)) that were achieved by the reduction in threading dislocation density enabled by the SiGe buffers, and thus reduced carrier recombination losses. This is the highest independently confirmed efficiency and open-circuit voltage for a GaAs solar cell grown on a Si-based substrate to date. Larger area solar cells were also studied in order to examine the impact of device area on GaAs-on-SiGe solar cell performance; we found that an increase in device area from 0.36 to 4.0 cm/sup 2/ did not degrade the measured performance characteristics for cells processed on identical substrates. Moreover, the device performance uniformity for large area heteroepitaxial cells is consistent with that of homoepitaxial cells; thus, device growth and processing on SiGe substrates did not introduce added performance variations. These results demonstrate that using SiGe interlayers to produce "virtual" Ge substrates may provide a robust method for scaleable integration of high performance III-V photovoltaics devices with large area Si wafers.     

Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

Microstructural and textural characterization of a hot-rolled IF steel

The present paper reports the experimental results on the microstructural and textural characterization of a hot-rolled IF steel. The IF steel was hot-rolled in multiple passes in the austenitic field (1,070 °C) followed by air-cooling. SEM, TEM, and LOM were used to image the microstructure of the material. The global texture was determined by X-ray diffraction (XRD) technique. The mesotexture of selected regions was investigated by electron backscatter diffraction (EBSD). Results show the presence of a diffuse (nearly random) and weak texture in the hot-band that consists of recrystallized polygonal grains and subgrains. The fraction of boundaries with misorientations comprised in the interval 2° ≤ ψ < 15° was found to be lower than 5%. It can be concluded that these low angle boundaries and the presence of subgrains can be associated to the existence of a few areas softened by recovery during or after hot rolling in austenitic field.