Possibilities and problems with the use of models as a communication tool in water resource management

Politicians and policy-makers, as well as modellers, often nurses an expectation that model derived results is an objective source of information that can be used to support decisions. However, several prerequisites have to be dealt with in order to ensure that models can be used as legitimate and efficient tools in water resource management. Based on empirical material from recent studies on the use of models in stakeholder dialogues, mainly focusing on catchment nutrient transport, two central problems are identified: (a) Models are laden with choices and thus depend on assumptions and priorities of modellers. (b) There are several factors that influence ability and willingness of stakeholders (as information recovers) to criticize or accept results of the modelling exercise. Recognized factors likely to influence stakeholders' acceptance of model derived results include issues at stake, stakeholders' ability to criticize model derived information, and their trust in the institutions that have developed or applied the used models. Identified prerequisites for successful use of models in integrated water resource management include: consideration of user relevance, awareness of and preparedness to handle constraints linked to communication of model-based results, transparency of used models and data and of involved uncertainties, mutual respect between experts and stakeholders and between involved stakeholder groups, a robust institutional network, and sufficient time for dialogues. Development and use of strategies for participatory modelling, based on a continuous dialogue between experts and stakeholders is recommended as a way to facilitate that the prerequisites for a successful use of models in water resource management are fulfilled.     

Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity

Recently, lanthanides have been employed by researchers to examine their impact on the structure and properties of Li₇La₃Zr₂O₁₂ (LLZO) garnets. In this regard, we developed Europium oxide (Eu₂O₃) doped LLZO (Li_7+δEu_xLa_3−δZr_2−δO_12−δ) solid electrolyte which demonstrates a cubic phase with the symmetry of Iad (No.230) at room temperature. In this investigation, different concentrations of Eu ranging from 0.1 to 0.6 atoms per formula unit (pfu) were doped into Li₇La₃Zr₂O₁₂ to evaluate the impact of Eu on the stability of the cubic phase and thereby the ionic conductivity. The results unveiled that upon doping Eu³⁺ ions, the Eu²⁺ state is also formed and is then self-doped into the structure in which Rietveld refinement coupled with XPS, EPR, and solid-state NMR suggests that Eu³⁺ ions most probably partially occupy Zr⁴⁺ (16a) site, the Eu²⁺ ions occupy La³⁺ (24d) site, and the Li⁺ ions occupy two different sites (24d and 96h). It was further found that such a site preference induces distortion at LaO₈ polyhedrons opening up the neck for Li-ions diffusion, thereby enhancing the ionic conductivity. Moreover, it was revealed that Li-ions probably hop from 96h to 24d and then to 96h site to generate the Li-ion movement. Overall, by introducing Eu ions into the LLZO structure, an enhanced bulk ionic conductivity of 0.30 × 10⁻³ S/cm at 298 K with a minimum electronic conductivity of 2.547 × 10⁻⁹ S/cm at 298 K was achieved.     

Variance sensitive adaptive threshold-based PCA method for fault detection with experimental application

Principal Component Analysis (PCA) is a statistical process monitoring technique that has been widely used in industrial applications. PCA methods for Fault Detection (FD) use data collected from a steady-state process to monitor T² and Q statistics with a fixed threshold. For the systems where transient values of the processes must be taken into account, the usage of a fixed threshold in PCA method causes false alarms and missing data that significantly compromise the reliability of the monitoring systems. In the present article, a new PCA method based on variance sensitive adaptive threshold (T_vsa) is proposed to overcome false alarms which occur in the transient states according to changing process conditions and the missing data problem. The proposed method is implemented and validated experimentally on an electromechanical system. The method is compared with the conventional monitoring methods. Experimental tests and tabulated results confirm the fact that the proposed method is applicable and effective for both the steady-state and transient operations and gives early warning to operators.     

The influence of nitrogen doping on reduced graphene oxide as highly cyclable Li-ion battery anode with enhanced performance

A straightforward, one-step route has been established to fabricate reduced- (rGO) and nitrogen-doped reduced graphene oxide (NrGO) with remarkable lithium-ion storage properties. The graphene oxide (GO) was synthesized as starting material by improved Hummers’ method. Thereafter, thermally annealing GO with NH₃ at elevated temperature to synthesize NrGO was yielded a more open structure with nitrogen sites suitable for enhanced Li intercalation. NrGO exhibited a reversible capacity of 240 mAhg^?1 at 10 Ag^-1 after 500 cycles with 90% capacity retention, which is the best result achieved among graphene oxide-based anodes at this current density. In contrast to rGO, NrGO cells exhibited a gradually increasing capacity profile, reaching up to 114% of the initial capacity at 0.1, 2, and 10 Ag^-1 current densities. Results showed that high occupancy of pyridinic N within NrGO enhanced battery performance and cell kinetics upon cycling which offers long-time operability at high current density.     

Latent heat energy storage characteristics of building composites of bentonite clay and pumice sand with different organic PCMs

In the present work, six new kinds of building composite PCMs (BCPCMs), PS/octadecane, BC/octadecane, PS/CA–MA, BC/CA–MA, PS/PEG1000, and BC/PEG1000 composites, were prepared by using vacuum impregnation method. The maximum percent of PCM in the composites was assigned to be 12, 13, 18, 23, 30, and 42 wt%, respectively. The form‐stable BCPCMs were characterized using SEM, FT‐IR, DSC, and TG analysis techniques. The characterization results showed the existence of homogenous dispersion of the PCM into the PBM matrixes. The DSC measurements indicated that the melting temperatures of the form‐stable BCPCMs are in the range of 20–33°C while they have latent heats of melting in the range of about 28–55 J/g. These results make them promising BCPCMs for low temperature‐passive TES applications in buildings. Thermal cycling test indicated that the prepared BCPCMs have good thermal reliability and chemical stability. TG analysis proved that the prepared BCPCMs have good thermal durability. In addition, the thermal conductivity of BCPCMs was enhanced considerably by addition of expanded graphite (EG). The improvement in thermal conductivity of the BCPCMs caused appreciably reduction in their melting times. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterization of nanocomposite resol resins: Individual/synergist effects of alendronic acid and sepiolite

Alendronic acid modified resol nanocomposite resins (AA‐PFNCRs) and sepiolite modified resol nanocomposite resins (SEP‐PFNCRs) have been synthesized by in situ method in the presence of base catalyst. Additionally, the synergistic effects of alendronic acid and sepiolite clay (AA‐SEP‐PFNCR) on the resol resin have been studied. The structure, morphology, and thermal properties of these nanocomposites have been investigated by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and X‐ray Diffraction (XRD). The results demonstrated the interactions between the fillers and resol resin. Thermal properties of nanocomposite resins were improved due to alendronic acid and sepiolite. The obtained samples were also characterized morphologically by Scanning Electron Microscope (SEM). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43807.     

Synthesis and characterization of conducting copolymers of thiophene-3-yl acetic acid cholesteryl ester with pyrrole

A new polythiophene containing a cholesteryl side chain in the -position was chemically polymerised in nitromethane/carbontetrachloride using FeCl₃ as the oxidizing agent. Polymerisation was also achieved by constant current electrolysis in dichloromethane. Subsequently, conducting copolymers of thiophene-3-yl acetic acid cholesteryl ester (CM), PCM1 (obtained from chemical polymerisation method) and PCM4 (obtained from constant current electrolysis) with pyrrole were synthesized using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolyses. Characterizations of the samples were performed by CV, FTIR, NMR, DSC, TGA and SEM analyses. Electrical conductivities were measured by the four-probe technique.     

Preparation,characterization and thermal properties of PMMA/n-heptadecane microcapsules as novel solid–liquid microPCM for thermal energy storage

This study is focused on the preparation, characterization and thermal properties of microencapsulated n-heptadecane with polymethylmethacrylate shell. The PMMA/heptadecane microcapsules were synthesized as novel solid–liquid microencapsulated phase change material (microPCMs) by emulsion polymerization method. The chemical and thermal characterization of the microPCMs were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA). The diameters of microPCMs were found in the narrow range (0.14–0.40 μm) under the stirring speed of 2000 rpm. The spherical surfaces of microPCMs were smooth and compact. The DSC results show that microPCMs have good energy storage capacity. Thermal cycling test showed that the microPCMs have good thermal reliability with respect to the changes in their thermal properties after repeated 5000 thermal cycling. TGA analyses also indicated that the microPCMs degraded in three steps and have good thermal stability. Based on all results, it can be considered that the PMMA/heptadecane microcapsules as novel solid–liquid microPCMs have good energy storage potential.     

Thermal energy storage by poly(styrene-co-p-stearoylstyrene) copolymers produced by the modification of polystyrene

A series of poly(styrene-co-p-stearoyl styrene) copolymers as novel polymeric solid–solid phase-change materials (SSPCMs) were synthesized by the modification of polystyrene with stearoyl chloride. The chemical structure and crystalline morphology of the synthesized copolymers were determined with Fourier transform infrared spectroscopy and polarized optical microscopy, respectively. The thermal energy storage properties and thermal stability of the SSPCMs were investigated with differential scanning calorimetry and thermogravimetric analysis, respectively. In addition, the thermal conductivity of the SSPCMs was measured with a thermal property analyzer. Moreover, thermal cycling tests showed that the copolymers had good thermal reliability and chemical stability after being subjected to 5000 heating/cooling cycles. The synthesized poly(styrene-co-stearoyl styrene) copolymers as novel SSPCMs have considerable potential for thermal energy storage and temperature-control applications. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Biotreatability enhancement of aqueous Reactive Black 5 by hydrogen peroxide/ultraviolet advanced oxidation process

The efficiency of ultraviolet/hydrogen peroxide photo‐oxidation processing for enhancing the biodegradability of Reactive Black 5 prior to biological treatment processing of acclimated and non‐acclimated sequencing batch reactors was evaluated. Photo‐oxidation experiments were conducted according to an experimental design method in which aqueous Reactive Black 5 samples with an initial concentration of 200 mg/l were exposed to ultraviolet irradiation for 15, 30 and 60 min in the presence of various concentrations of hydrogen peroxide (250, 500 and 1000 mg/l) at pH 7. Pretreated samples were then subjected to respirometric biodegradability tests using the sludge cultures obtained from acclimated and non‐acclimated sequencing batch reactors for the determination of the kinetic constants of q_max and K_s according to the modified Organisation of Economic Cooperation and Development 209 method. Calculated values of q_max and K_s showed that the acclimated sludge of the sequencing batch reactor showed a better performance than the non‐acclimated sludge in the degradation of photochemically pretreated aqueous Reactive Black 5. The advantage of acclimated sludge compared with non‐acclimated sludge for the biodegradation of Reactive Black 5 diminished when photochemical pretreatment conditions reached higher levels in terms of oxidation time and hydrogen peroxide concentration.