Ternary Blends of Renewable Fast Pyrolysis Bio-Oil,Advanced Bioethanol,and Marine Gasoil as Potential Marine Biofuel

An alternative for reducing emissions from marine fuel is to blend bio-oil from lignocellulose non-edible feedstocks to diesel fossil fuels. Phase diagrams of the ternary systems were built to represent the transition from heterogeneous regions to homogeneous regions. Four homogeneous blends of bio-oil of eucalyptus-bioethanol-marine gasoil were experimentally characterized with respect to the most important fuel parameters for marine engines: water content, flash point, low heating value, viscosity, and acidity. Blends with closer properties to marine gasoil replacement, lower costs, and environmental impacts should be tested for large engines.     

Near‐Infrared (NIR) Organic Light‐Emitting Diodes (OLEDs): Challenges and Opportunities

The rapid development of the science and technology of organic semiconductors has already led to mass application of organic light‐emitting diodes (OLEDs) in television monitors of outstanding quality as well as in a large variety of smaller displays found in smartphones, tablets, and other gadgets, while introduction of the technology to the illumination sector is imminent. Notably, the requirements of all such applications for emission in the visible range of the electromagnetic spectrum are well tuned to the optical and electronic properties of typical organic semiconductors, thereby representing relatively “low‐hanging fruits,” in terms of material development and exploitation. However, the question arises as to whether developing materials suited for efficient near‐infrared (NIR, 700–1000 nm) emission is possible, and, crucially, desirable to enable new classes of applications spanning from through‐space, short‐range communications to biomedical sensors, night vision, and more generally security applications to name but a few. Here, the major fundamental hurdles to be overcome to achieve efficient NIR emission from organic π‐conjugated systems are discussed, recent progress is reviewed, and an outlook for further development of both materials and applications is provided.     

Sofosbuvir Selects for Drug-Resistant Amino Acid Variants in the Zika Virus RNA-Dependent RNA-Polymerase Complex In Vitro

The nucleotide analog sofosbuvir, licensed for the treatment of hepatitis C, recently revealed activity against the Zika virus (ZIKV) in vitro and in animal models. However, the ZIKV genetic barrier to sofosbuvir has not yet been characterized. In this study, in vitro selection experiments were performed in infected human hepatoma cell lines. Increasing drug pressure significantly delayed viral breakthrough (p = 0.029). A double mutant in the NS5 gene (V360L/V607I) emerged in 3 independent experiments at 40–80 µM sofosbuvir resulting in a 3.9 ± 0.9-fold half- maximal inhibitory concentration (IC₅₀) shift with respect to the wild type (WT) virus. A triple mutant (C269Y/V360L/V607I), detected in one experiment at 80 µM, conferred a 6.8-fold IC₅₀ shift with respect to the WT. Molecular dynamics simulations confirmed that the double mutant V360L/V607I impacts the binding mode of sofosbuvir, supporting its role in sofosbuvir resistance. Due to the distance from the catalytic site and to the lack of reliable structural data, the contribution of C269Y was not investigated in silico. By a combination of sequence analysis, phenotypic susceptibility testing, and molecular modeling, we characterized a double ZIKV NS5 mutant with decreased sofosbuvir susceptibility. These data add important information to the profile of sofosbuvir as a possible lead for anti-ZIKV drug development.     

Polyynes from Submerged Electric Arc. IV. Hydrogenation to Ene-Ynes

The polyynes produced by the electric arc between graphite electrodes submerged in hexane are readily reduced to a mixture of polyenes and ene-ynes by a treatment with Zn dust and hydrochloric acid. Experimental evidences of this reduction reaction are presented by electronic absorption spectroscopy, FT-IR spectroscopy, and HPLC analysis with diode-array detector. Some consequences of this simple passage from polyynes to ene-ynes are briefly discussed in a biochemical context.     

Thermal-lens and photo-acoustic methods for the determination of SiC thermal properties

In this paper we report the use of photothermal techniques such as Thermal lens (TL) spectrometry, Photoacoustic and heat capacity, ρc_p, to determine the thermo-optical parameters, such as thermal conductivity (K), thermal diffusivity (D), specific heat (c_p) and the optical path dependence with temperature (ds/dT), of an undoped polycrystalline 3C-SiC. To our knowledge, this is the first time that Thermal lens technique is used for wide band-gap systems. Results obtained for the polycrystalline sample with TL technique indicates that ds/dT is negative at room temperature. Moreover, the obtained values of thermal diffusivity and thermal conductivity are in good agreement with that found in the literature, indicating that the phototermal techniques can be used to obtain the referred parameters in circumstances where other techniques cannot be used, for example, in harsh environments.     

An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.     

Comparison of a modified Sugiura procedure with portal systemic shunt for prevention of recurrent variceal bleeding in cirrhosis

BACKGROUND: There is no agreement on the management of patients with cirrhosis and recurrent variceal bleeding after failure of medical or endoscopic treatments or both. Portal systemic shunts are highly effective in preventing rebleeding but are associated with a high incidence of chronic encephalopathy. This study compared the results of a slightly modified Sugiura procedure (esophageal transection plus esophagogastric devascularization plus splenectomy) with those of nonselective portal systemic shunts in patients with previous variceal bleeding. METHODS: Fifty-four patients were included in this randomized controlled study between January 1984 and April 1989. The major end point was chronic encephalopathy. Secondary end points were recurrent variceal bleeding, survival, ascites, and hepatocellular carcinoma. RESULTS: Twenty-seven patients were assigned to each group. The rate of chronic encephalopathy was significantly (p = 0.002) lower after modified Sugiura procedure than after portal systemic shunt. Recurrent variceal bleeding was more frequent after modified Sugiura procedure than after portal systemic shunt, but the difference is not significant. One-, two-, and three-year survival rates were 93%, 81%, and 67%, respectively, in the modified Sugiura group and 78%, 66%, and 39%, respectively, in the portal systemic shunt group (p = 0.044). CONCLUSIONS: These results suggest that the modified Sugiura procedure is better overall than the nonselective portal systemic shunt in the management of patients with cirrhosis and recurrent variceal bleeding. Although the rebleeding rate is higher after the modified Sugiura procedure, this does not seem to affect mortality in these patients.     

Transmission loss allocation through equivalent bilateral exchanges and economical analysis

A new loss allocation (LA) scheme based on the principle of equivalent bilateral exchanges (EBEs) is presented and compared with other available techniques. Formulation and results from extensive simulations including consistency tests show that the suggested methodology has several desirable properties: It is flow-based, requiring only a solved load flow for its implementation; it is not dependent on the choice of a slack bus; it is straightforward to apply; undesirable negative loss allocation is not produced; and low volatilities are shaped. An economic analysis with various LA methods is also carried out when these are integrated into a combined economic dispatch/load flow dispatch strategy, a likely scenario for LA in a real system. This combined dispatch strategy yields prices charged to the loads and rates received by the generators that account for loss allocation and loss supply. Results show that these economic indexes are very close to the marginal costs derived from an optimal power flow (OPF) approach with the advantage of reducing volatility.     

Vibrational analysis of functionalized polyolefins/poly(vinylchloride) blends

Polyolefins functionalized with diethylmaleate were mixed with poly(vinylchloride) (PVC) in different compositions. Intermolecular interactions involving the carbonyl groups of the side chains of the functionalized polyolefins and methine hydrogens of PVC were investigated by means of infrared spectroscopy. The major flexibility of the ester groups attached to the backbone chains, with respect to polyesters, seems to increase the capability of such groups to interact with groups of more polar polymers, thus allowing prediction of easier miscibility, which however also depends on the starting polyolefin structure and function-alization degree.