An optimized skin texture model using gray-level co-occurrence matrix

Neural Computing and Applications - Texture analysis is devised to address the weakness of color-based image segmentation models by considering the statistical and spatial relations among the group...     

Noncoherent detection scheme for GSM system

A receiver employing frequency discriminator demodulation and maximum likelihood sequence estimator detection is proposed for the GSM mobile telephone system. Computer simulated bit error rates based on two ray and GSM propagation models are presented. The proposed scheme is more tolerant to carrier frequency offset than a coherent system     

EFFECT OF CRACKING REACTIONS KINETICS ON THE MODEL PREDICTIONS OF AN INDUSTRIAL FLUID CATALYTIC CRACKING UNIT

Fluid catalytic cracking (FCC) is one of the most complex processes in the petroleum industry. The large degree of uncertainty in the kinetics of the cracking reactions and catalyst deactivation by coke deposition in the riser reactor are among several factors that contribute to the process complexity. The model developed by the authors (Ali and Rohani, 1995) is used lo investigate the effect of the three-lumped kinetic scheme (Weekman and Nace, 1970) and the four-lumped scheme (Lee ct ah, 1989) on the model predictability and reliability. The effect of changes in the catalyst circulation rate, gas oil feed rate, and oxygen feed concentration on various process variables is compared. It is shown that the three-lumped kinetic scheme, despite its extensive use in the literature (McFarlane et ah, 1993; Elnashaie and Elshishini, 1993; Theologos and Markatos, 1993; Arandes and de Lasa, 1992; Lopez-lsunza and Ruiz-Martinez, 1991), leads to erroneous results and should not be used in the dynamic simulation of the FCC units,     

On-line determination of supersaturation of a kcl-nacl aqueous solution based on density measurement

A method is developed for the calculation of the saturation temperature of a KCI-NaCI aqueous solution, based on the measurement of the density and temperature of a sample solution, and prior knowledge of the NaCl concentration. Experimental density and solubility data for solutions saturated with KCI in the temperature range of 299 to 321 K with concentrations of NaCl greater than 0.200 kg/kg H₂O were used to develop the empirical correlation allowing the calculation of the solution saturation level. The method is applicable in the on-line determination of the level of supersaturation in a KCI crystallizer in which the NaCl concentration is known. Knowledge of the prevailing supersaturation is necessary for the control of crystal purity and crystal size distribution in industrial potash crystallizers.     

Sixty-four years of informetrics research: productivity,impact and collaboration

This paper analyses the information science research field of informetrics to identify publication strategies that have been important for its successful researchers. The study uses a micro-analysis of informetrics researchers from 5,417 informetrics papers published in 7 core informetrics journals during 1948–2012. The most productive informetrics researchers were analysed in terms of productivity, citation impact, and co-authorship. The 30 most productive informetrics researchers of all time span several generations and seem to be usually the primary authors of their research, highly collaborative, affiliated with one institution at a time, and often affiliated with a few core European centres. Their research usually has a high total citation impact but not the highest citation impact per paper. Perhaps surprisingly, the US does not seem to be good at producing highly productive researchers but is successful at producing high impact researchers. Although there are exceptions to all of the patterns found, researchers wishing to have the best chance of being part of the next generation of highly productive informetricians may wish to emulate some of these characteristics.     

Effects of dynamic vulcanization on tensile,morphological, and swelling properties of poly(vinyl chloride) (PVC)/epoxidized natural rubber (ENR)/(Kenaf core powder) composites

The effects of dynamic vulcanization on properties of poly(vinyl chloride) (PVC)/epoxidized natural rubber (ENR)/(kenaf core powder) composite were studied. Tensile properties indicated that the strength, elongation at break, and Young's modulus of the composites exhibited an increase for samples with dynamic vulcanization. Morphological analysis using scanning electron microscopy showed the interaction between ENR and PVC. There was no bonding between kenaf core powder and the PVC/ENR matrix owing to the different polarity of both components. Filler agglomerates increased, which leads to an increase of filler‐filler interaction and poor dispersion. Furthermore, swelling index indicated that the composite with dynamic vulcanization shows lower absorption of tolune compared with composites without dynamic vulcanization. J. VINYL ADDIT. TECHNOL., 22:206–212, 2016. © 2014 Society of Plastics Engineers     

Synthesis of polyamidoxime chelating ligand from polymer‐grafted corn‐cob cellulose for metal extraction

A conventional free‐radical initiating process was used to prepare graft copolymers from acrylonitrile (AN) with corn‐cob cellulose with ceric ammonium nitrate (CAN) as an initiator. The optimum grafting was achieved with corn‐cob cellulose (anhydroglucose unit, AGU), mineral acid (H₂SO₄), CAN, and AN at concentrations of 0.133, 0.081, 0.0145, and 1.056 mol/L, respectively. Furthermore, the nitrile functional groups of the grafted copolymers were converted to amidoxime ligands with hydroxylamine under basic conditions of pH 11 with 4 h of stirring at 70°C. The purified acrylic polymer‐grafted cellulose and polyamidoxime ligand were characterized by Fourier transform infrared spectroscopy and field emission scanning electron microscopy analysis. The ligand showed an excellent copper binding capacity (4.14 mmol/g) with a faster rate of adsorption (average exchange rate = 7 min), and it showed a good adsorption capacity for other metal ions as well. The metal‐ion adsorption capacities of the ligand were pH‐dependent in the following order: Cu²⁺ > Co²⁺ > Mn²⁺ > Cr³⁺ > Fe³⁺ > Zn²⁺ > Ni²⁺. The metal‐ion removal efficiency was very high; up to 99% was removed from the aqueous media at a low concentration. These new polymeric chelating ligands could be used to remove aforementioned toxic metal ions from industrial wastewater. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40833.     

Enhancement of etch rate for preparation of nano-sized ion-track membranes of poly(vinylidene fluoride): Effect of pretreatment and high-LET beam irradiation

We investigated how pretreatment and high-LET beam irradiation affected the ion-track dissolution rate in poly(vinylidene fluoride) (PVDF) films by SEM observations and conductometric analysis in order to develop the preparation methodology of nano-sized ion-track membranes. PVDF thin films irradiated with four types of ion beams were exposed to a 9 mol/dm³ KOH aqueous solution after their storage in air at 120 °C. This heating treatment was found to enhance the etch rate in the latent track, both in the inner core and outer halo regions, without changing that in the bulk, probably due to the formation of parasitic oxidation products facilitating the introduction of the etching agent to improve the etchability. Additionally, the irradiation of heavier higher-LET ions, causing each track to more activated sites (like radicals), was preferable for achieving effective etching.     

Particles settling studies using ultrasonic techniques

Effects of acoustic velocity and attenuation measurements during settling of 43-, 110- and 168-μm glass beads in water are reported. Ultrasonic waves were generated at a frequency of 3.2 MHz. An abrupt increase in acoustic velocity and a sharp peak in the attenuation characterized the onset of settled bed. The observed attenuation peak at the transition between suspended and settled bed was attributed to dissipation caused by viscous absorption losses. The critical concentration at which increase in acoustic velocity and attenuation peak occurred was estimated for these particle sizes.