Multimodal sensing and active continuous closed‐loop feedback for achieving reliable manipulation in the outdoor physical world

The use of field robots can greatly decrease the amount of time, effort, and associated risk compared to if human workers were to carryout certain tasks such as disaster response. However, transportability and reliability remain two main issues for most current robot systems. To address the issue of transportability, we have developed a lightweight modularizable platform named AeroArm. To address the issue of reliability, we utilize a multimodal sensing approach, combining the use of multiple sensors and sensor types, and the use of different detection algorithms, as well as active continuous closed‐loop feedback to accurately estimate the state of the robot with respect to the environment. We used Challenge 2 of the 2017 Mohammed Bin Zayed International Robotics Competition as an example outdoor manipulation task, demonstrating the capabilities of our robot system and approach in achieving reliable performance in the fields, and ranked fifth place internationally in the competition.     

Effect of the addition of silver compounds during the pyrolysis of manganese nitrate on tantalum anodic oxide film

A study of the pyrolysis of an aqueous solution of manganese nitrate in the presence of silver compounds has been carried out. Thermal analysis showed that the MnO₂ formation temperature and the transformation temperature from MnO₂ to Mn₂O₃ shifted towards a lower temperature in the presence of silver acetate. A large particle-size and high crystallinity MnO₂ was formed; this may be a useful method of making an excellent tantalum capacitor with high capacitance.     

Stabilization of inter-area and/or oscillatory modes in large-scale power system by voltage impedance power system (VIPS) apparatus based on decentralized control scheme

New technologies such as power electronics have made it possible to change continuously the impedance of a power system not only to control power flow but also to enhance stability. A power system incorporating a variable impedance apparatus such as a variable series capacitor (VSrC) and high-speed phase shifter (HSPS) is called VIPS (Variable Impedance Power System) by the authors. This paper proposes a novel control method of VIPS apparatus such as VSrC and HSPS installed at an interconnecting point for stabilizing inter-area unstable and/or oscillatory modes. The proposed design method of the control system is a kind of hierarchical decentralized control method of a large-scale power system based on a Lyapunov function. Under the proposed control scheme, each subsystem can be stabilized independently by local controllers such as AVR, speed governor and PSS, and then the whole interconnected system can be stabilized by VIPS apparatus taking into account interactions between subsystems. The effectiveness and robustness of the VIPS apparatus control are shown by numerical examples with model systems including a large-scale power system.     

Macroscopic analysis of design processes based on a scheme for coding designers' cognitive actions

We have devised a new scheme for coding designers' cognitive actions from video/audio design protocols. Designers' actions are coded into four cognitive levels; physical, perceptual, functional and conceptual. Relations between actions belonging to different levels, such as dependencies and triggering relations, are also coded. The present scheme has two benefits. First, we found that design actions are definable in a systematic way using the vocabulary of the scheme, and thus a designer's cognitive behaviours in each of local design stages is represented as a structure composed of defined primitive actions. This is expected to lay the foundation for microscopic analyses of how particular types of actions contribute to the formation of key design ideas. Second, this scheme is suitable for macroscopic analyses of how designers cognitively interact with their own sketches. We examined, for a practising architect, the ways in which drawing, inspection of drawings, perception, and functional thoughts correlated with one another in his design process. The findings suggest that design sketches serve not only as external memory or as a provider of visual cues for association of non-visual information, but also as a physical setting in which design thoughts are constructed on the fly.     

Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

Preparation of pyrochlores. A1−xHxTaO3·nH2O (A=Na,K)

Pyrochlores of A_1?xH_xTaO₃·nH₂O (A=Na,K) were prepared under the hydrothermal conditions. The values of x for these compounds were increased from 0.3 to 0.5 for A=Na and from 0.2 to 0.5 for A=K by treatment with the distilled water. The compounds with x<0.5 were decomposed to a mixture of NaTaO₃ and Na₂Ta₄O₁₁ for A=Na, or to a mixture of KTaO₃ and a tetragonal tungsten bronze phase, and those with x=0.5 to a single phase of A₂Ta₄O₁₁ at elevated temperatures. Below the decomposition temperatures, defect pyrochlores with oxygen vacancies, $\text{A}{}_{\mathrm{<mtext>1?</mtext><mtext>x</mtext>}}\text{TaO}{}_{\mathrm{<mtext>3?</mtext><mtext>x</mtext><mtext>2</mtext>}}$, were produced. They were hygroscopic, and in the case of A=K and x=0.5 the original phase was recovered by leaving in air for several hours.     

Interferon-gamma and interleukin-10 inhibit antigen presentation by Langerhans cells for T helper type 1 cells by suppressing their CD80 (B7-1) expression

CD80(B7-1) and CD86(B7-2) co-stimulatory molecules have been reported to activate Th1/Th2 development pathways differentially. It is well known that Langerhans cells (LC), potent antigen-presenting dendritic cells in the epidermis, express several co-stimulatory molecules and that this expression is modulated by several cytokines. Based on the recently reported effect of interferon (IFN)-gamma and interleukin (IL-)-10 on the expression of CD80 and CD86 by LC, we examined the effects of these cytokines on the expression of CD54 (intercellular adhesion molecule-1) and CD40 in addition to CD80 and CD86 on LC, and correlated the expression of each co-stimulatory molecule with antigen presentation for a Th1 clone by cultured LC (cLC) treated with these cytokines. LC cultured for 72 h significantly up-regulated MHC class II antigen expression and all the co-stimulatory molecules were examined. As previously reported, IL-10 or IFN-gamma inhibited the up-regulation of CD80 expression. Granulocyte/macrophage-colony-stimulating factor (GM-CSF) partially restored the suppression of CD80 expression induced by IFN-gamma on cultured LC, while it had virtually no effect on the inhibition induced by IL-10. Antigen presentation for the myoglobin-specific syngeneic Th1 clone by cLC, which were pre-incubated with these cytokines, correlated well with their CD80 expression. In addition, among the antibodies for CD80, CD86, CD28 or CD40, the suppression of the Th1 clone stimulation by LC was found to occur only with anti-CD80 and anti-CD28 antibodies. Finally, we studied the effects of IFN-gamma and IL-10 on GM-CSF production by epidermal keratinocytes (KC). We could show that only IFN-gamma, but not IL-10, suppressed GM-CSF production by KC. These findings suggest that both IFN-gamma and IL-10 suppress antigen presentation by LC for Th1 cells by suppressing their CD80 expression. The inhibitory effect of IFN-gamma on CD80 expression on LC appears to be partially mediated through the suppression of GM-CSF production by KC.     

Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.