Phase characterization and mechanical and flame‐retarding properties of nano‐CaSO4/polypropylene and nano‐Ca3(PO4)2/polypropylene composites

An in situ deposition approach was used for the synthesis of nano‐CaSO₄ and nano‐Ca₃(PO₄)₂. The nanosize particles were confirmed with an X‐ray diffraction technique. Composites of polypropylene (PP) with 0.1–0.5 wt % nano‐ or commercial CaSO₄ or nano‐Ca₃(PO₄)₂ were prepared. The transition from the α phase to the β phase was observed for 0.1–0.3 wt % nano‐CaSO₄/PP and nano‐Ca₃(PO₄)₂/PP composites. This was confirmed by Fourier transform infrared. A differential scanning calorimetry analysis was carried out to determine the thermal behavior of the nanocomposites with increasing amounts of the nano‐CaSO₄ and nano‐Ca₃(PO₄)₂ fillers. Increases in the tensile strength and Young's modulus were observed up to certain loading and were followed by a decrease in the tensile strength. A continuous decrease in the elongation at break (%) was also observed for commercial CaSO₄ and larger nano‐Ca₃(PO₄)₂. A decrease in the mechanical properties after a certain loading might have been due to the agglomeration and phase transition of PP in the composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 670–680, 2007     

Generating vegetation leaf area index Earth system data record from multiple sensors. Part 2: Implementation,analysis and validation

The evaluation of a new global monthly leaf area index (LAI) data set for the period July 1981 to December 2006 derived from AVHRR Normalized Difference Vegetation Index (NDVI) data is described. The physically based algorithm is detailed in the first of the two part series. Here, the implementation, production and evaluation of the data set are described. The data set is evaluated both by direct comparisons to ground data and indirectly through inter-comparisons with similar data sets. This indirect validation showed satisfactory agreement with existing LAI products, importantly MODIS, at a range of spatial scales, and significant correlations with key climate variables in areas where temperature and precipitation limit plant growth. The data set successfully reproduced well-documented spatio-temporal trends and inter-annual variations in vegetation activity in the northern latitudes and semi-arid tropics. Comparison with plot scale field measurements over homogeneous vegetation patches indicated a 7% underestimation when all major vegetation types are taken into account. The error in mean values obtained from distributions of AVHRR LAI and high-resolution field LAI maps for different biomes is within 0.5 LAI for six out of the ten selected sites. These validation exercises though limited by the amount of field data, and thus less than comprehensive, indicated satisfactory agreement between the LAI product and field measurements. Overall, the inter-comparison with short-term LAI data sets, evaluation of long term trends with known variations in climate variables, and validation with field measurements together build confidence in the utility of this new 26 year LAI record for long term vegetation monitoring and modeling studies.     

Effect of the surface roughness of conducting polypyrrole thin-film electrodes on the electrocatalytic reduction of nitrobenzene

Conducting polypyrrole (PPy) thin-film electrodes were prepared by the electropolymerization of pyrrole on gold-coated glass plates. Films of various roughnesses were obtained by the variation of the scan rates during electropolymerization. These thin films were modified by doping with 6mM of the dopant NiCl₂. The surface morphology of the films was studied by scanning electron microscopy and atomic force microscopy (AFM), which suggested films prepared with a high scan rate were rougher in nature than the films produced with a low scan rate. The electrocatalytic reduction of nitrobenzene was carried out with these electrodes with the cyclic voltammetry technique in acetonitrile containing 0.1M HClO₄ as a supporting electrolyte. The various results obtained show that the conducting PPy thin-film electrodes were catalytically active toward the electroreduction process. The modified PPy film electrodes doped with NiCl₂ were more active toward nitrobenzene electroreduction than the PPy film alone. The results indicate that the roughness of the films played a very important role in determining their catalytic activity. The PPy films that were more rough in nature were catalytically more active than the smooth films; this may have been due to the availability of more reactive sites in the case of rough films. The apparent diffusion coefficients of the PPy film electrodes were also calculated. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A simple and efficient sun tracking mechanism using programmable logic controller

To increase the unit area illumination of solar ray on PV panel, it is required to track the sun throughout the day. So to reach the goal various type of sun tracking mechanism is already developed but in this paper we designed two different types of sun tracking mechanism: single axis and dual axis tracking using programmable logic controller (PLC) as it has numbers of unique advantages like??it is faster, reliable, requires less maintenance and reprogrammable. A comparative study between those two systems is also presented in this paper. The whole system has been designed and tested using GE, FANUC PLC.     

Alginate–chitosan composite hydrogel film with macrovoids in the inner layer for biomedical applications

Making of a layered composite using two biopolymer gels with regularly aligned voids in the inner layer is described in this article. Calcium alginate constituted the inner layer, within which voids of 500 μm diameter were embedded in monolayer or in multiple layers using a fluidic device for bubbling. The chitosan without any additional crosslinker was used to form the outer layer. The layered structure enabled compartmentalization of drug hold-up, and differential release rates. These aspects were reviewed using bovine serum albumin and vitamin B₁₂ as model solutes. The presence of voids at the inner layer of alginate increased the uptake, raising the level of absorptivity to more than 4000%. The composite film could hold two solutes at a time. The one, held inside the alginate layer started releasing only after 1 h of dipping in the release media. The adhesive strength between layers and the response of the composite film to compressive deformation are studied here. The effect of single or multiple layers of voids in the inner layer is reviewed. The slowing of degradation rate due to chitosan-encapsulation is experimentally determined. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47599.     

Physicochemical Characterization of Interaction of Ibuprofen by Solid-State Milling with Aluminum Hydroxide

This present study is a preliminary exploration of the affinity between a carboxylic model drug ibuprofen and aluminum hydroxide. Ibuprofen was comilled with aluminum hydroxide in different weight ratios in the solid state and was characterized by scanning electron microscopy (SEM), X-ray powder diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), and in vitro dissolution studies. XRD and SEM studies indicated complete interaction of ibuprofen with aluminum hydroxide and complete amorphization of aluminum hydroxide–ibuprofen complexed salt as well, on comilling with aluminum hydroxide at 1:2 ratio. FTIR data showed the disappearance of acid carbonyl peak with the appearance and the corresponding increase in absorbance of new signal at 1,682 cm^?1 in the 1:1 and 1:2 ibuprofen–aluminum hydroxide-comilled powder. The accompanied increase in the absorbance of carboxylate peak in the ibuprofen–aluminum hydroxide physical mixture, and 1:0.1, 1:0.5, 1:1, and 1:2 (IBA_pm, and IB₁A_0.1, IB₁A_0.5, IB₁A₁, and IB₁A₂, respectively) comilled powder indicated an acid–base reaction between ibuprofen and aluminum hydroxide. On storage at 40°C and 75% relative humidity (RH) for 10 weeks, XRD study showed the absence of reversion to the crystalline state and FTIR data revealed continued increase of new signal at 1,682 cm^?1 relative to carboxylic acid peak and no reappearance of carboxylic acid peak. In vitro dissolution studies revealed that the percent release of ibuprofen from the aluminum hydroxide-comilled powder is in the following order: IB₁A₂ < IB₁A₁ < ibuprofen crystal < ibuprofen milled alone < IB₁A_0.1 < IB₁A_0.5. Aluminum metal cation might have interacted to form a complex through the carboxyl and carbonyl groups of ibuprofen. Improved dissolution of drug associated with IB₁A_0.1 and IB₁A_0.5 is because of the absence of a new signal at 1,682 cm^?1 and improved amorphization of the drug to some extent. Dissolution of drug affected in IB₁A₂ and IB₁A₁ may be because of the insoluble stable complex formation.     

Optimum lateral extent of soil domain for dynamic SSI analysis of RC framed buildings on pile foundations

This article describes a novel approach for deciding optimal horizontal extent of soil domain to be used for finite element based numerical dynamic soil structure interaction (SSI) studies. SSI model for a 12 storied building frame, supported on pile foundation-soil system, is developed in the finite element based software framework, OpenSEES. Three different structure-foundation configurations are analyzed under different ground motion characteristics. Lateral extent of soil domain, along with the soil properties, were varied exhaustively for a particular structural configuration. Based on the reduction in the variation of acceleration response at different locations in the SSI system (quantified by normalized root mean square error, NRMSE), the optimum lateral extent of the soil domain is prescribed for various structural widths, soil types and peak ground acceleration levels of ground motion. Compared to the past studies, error estimation analysis shows that the relationships prescribed in the present study are credible and more inclusive of the various factors that influence SSI. These relationships can be readily applied for deciding upon the lateral extent of the soil domain for conducting precise SSI analysis with reduced computational time.     

Control of Dynamic Brake Through Heuristic Rule

In this paper, it is shown that the application of a dynamic brake or thyristorcontrolled braking resistor (TCBR) at the generator terminals enhances the power transfer limit over a transmission line greatly. Two types of dynamic brake configuration have been considered here: a 3-phase, bidirectional, fullwave, Y-connected, phase controlled conventional brake and a 3-phase, fullwave, thyristor-controlled rectifier bridge. A simple rule-based '' ON-OFF'' control law based on the local measurement of generator output power and its derivative is proposed in this paper. Detail digital simulation studies using the PSCAD/EMTDC package have been carried out. It was found that with the insertion of the dynamic brake circuit and its associated control, the system is able to recover following 3-line-to-ground faults even at very heavy power transfer levels, which is not possible otherwise.     

3D Simulations to investigate initial condition effects on the growth of Rayleigh–Taylor mixing

The effect of initial conditions on the growth rate of turbulent Rayleigh–Taylor (RT) mixing has been studied using carefully formulated numerical simulations. An implicit large-eddy simulation (ILES) that uses a finite-volume technique was employed to solve the three-dimensional incompressible Euler equations with numerical dissipation. The initial conditions were chosen to test the dependence of the RT growth parameters (α_b, α_s) on variations in (a) the spectral bandwidth, (b) the spectral shape, and (c) discrete banded spectra. Our findings support the notion that the overall growth of the RT mixing is strongly dependent on initial conditions. Variation in spectral shapes and bandwidths are found to have a complex effect of the late time development of the RT mixing layer, and raise the question of whether we can design RT transition and turbulence based on our choice of initial conditions. In addition, our results provide a useful database for the initialization and development of closures describing RT transition and turbulence.     

The Structure And Properties of a Thermo‐mechanically Processed Low Carbon High Strength Steel

Research efforts were given towards development of low carbon high strength steels since recent past. The present study deals with the development of a low carbon high strength steel alloyed with Mn, Ni, Mo, Cu and microalloyed with Ti and Nb. The steel was subjected to three stage controlled rolling operation followed by accelerated cooling. The structure and properties of the steel at various processing conditions were evaluated. Microstructural observation reveals predominantly lath martensite along with twinned martensite structure at all processing conditions. High strength values at higher finish rolling temperatures have been obtained due to fine martensitic structure along with tiny precipitates of microalloying carbide and carbonitride. The strength value increases marginally at lower finishing temperature due to comparatively finer lath size of martensite and increased precipitation density of carbides, carbonitrides along with Cu particles. The variation in impact toughness properties at different finish rolling temperatures is found to be negligible at ambient and subambient temperatures. The formation of stable and large TiN/TiCN particles during casting have impaired the impact toughness values at ambient and at ‐40°C temperatures.