Heavy arsenic doping of silicon grown by atmospheric pressure selective epitaxial chemical vapor deposition

Selective epitaxial Si with a high arsenic concentration of 2.2×10¹⁹ atoms/cm³ was deposited at a high growth rate of 3.3 nm/min under atmospheric pressure. It was confirmed that this method had excellent selectivity and produced films having good crystalline quality, abrupt dopant profiles at the interfaces, and smooth surfaces. The growth mechanism is discussed in terms of the relationship between the effects of arsenic surface segregation and etching by hydrogen chloride.     

Synthesis of High-Purity Zirconium Fluoride for Fluoride Glass Fibers by Chemical Vapor Deposition

A technique for synthesizing ultra-high-purity ZrF₄ using chemical vapor deposition in a ZrBr₄–HF system is developed and a purification mechanism is clarified. The Fe concentration in ZrF₄ is evaluated at less than 10 ppb based on analysis of the transmission loss spectrum of a fiber prepared using synthesized ZrF₄. Purification is achieved mainly in a sublimation process of ZrBr₄, and purification efficiency is determined by sublimation temperature and activity of impurities in ZrBr₄. The concentration of transition-metal impurities in ZrF₄, synthesized by chemical vapor deposition in the ZrBr₄–HF system, is expected to be less than 1 ppb.     

Formation of Tetravalent Fe Ions in LaFeO3 Perovskite Through Mechanochemical Modification by Ball Milling

Mechanochemical modification of previously synthesized LaFeO₃ perovskite‐type oxide by a high‐energy ball milling was investigated to introduce Fe⁴⁺ ions or transform some Fe³⁺ into Fe⁴⁺ in LaFeO₃. X‐ray absorption fine structure studies revealed that the formation of Fe⁴⁺ ions into LaFeO₃ perovskite has been achieved at first time by ball milling at room temperature without any additives or replacement of La³⁺ ions by some divalent cations. The structural model of Fe⁴⁺ containing LaFeO₃ could be described as with a modified perovskite having equal amounts of La and Fe vacancies, which is supported by a good correlation between the results of Fe K‐edge XANES spectra and O₂‐TPD. The synthesis of Fe⁴⁺‐containing LaFeO₃ perovskite by ball milling was able to produce the O₂ adsorption capacity of nonsubstituted perovskite‐type oxide.     

Physiologic stress responses to laparoscopic cholecystectomy. A comparison of the gasless and pneumoperitoneal procedures

BACKGROUND: Differences in the physiological stress response to pneumoperitoneal (PP) and gasless abdominal wall-lifting (AWL) procedures used for laparoscopic cholecystectomy have not been properly evaluated. METHODS: We compared leukocyte count, interleukin-6 (IL-6) levels, arterial blood gases, creatinine clearance, plasma renin activity, cardiothoracic ratio, and clinical outcome in 27 patients without systemic complications who underwent laparoscopic cholecystectomy, including 11 by AWL and 16 by PP. RESULTS: Transient leukocytosis and high IL-6 levels were observed at POD 1 (postoperative day) in both groups, but both values returned to baseline by POD 2. IL-6 levels correlated significantly with operation time (p < 0.01). Changes in blood gases, creatinine clearance, plasma renin activity, and cardiothoracic ratio were not different for the two groups. The clinical outcome was similar for both groups. CONCLUSIONS: Our results indicate that both PP and AWL are appropriate for patients without serious complications.     

Formation of silicon dioxide layers at low temperatures (150-400 °C) by atmospheric pressure plasma oxidation of silicon

The formation of silicon dioxide (SiO₂) layers at low temperatures (150-400 °C) by atmospheric pressure plasma oxidation of Si(0 0 1) wafers have been studied using a gas mixture containing He and O₂. A 150 MHz very high frequency (VHF) power supply was used to generate high-density atomic oxygen in the atmospheric pressure plasma. Oxidation rate, structure, and thickness and refractive index profiles of the oxidized layers were investigated by ellipsometry and infrared absorption spectroscopy. Atomic force microscopy was also employed to observe atomic-scale morphologies of the layer surface and wafer Si surface, after chemical removal of the oxidized layers. It was found that stoichiometric SiO₂ layers were obtained at higher oxidation rates than conventional dry O₂ thermal oxidation and radical oxidation processes, even at a very low substrate temperature of 150 °C. Although thickness variations were observed in the plasma region, the refractive index was independent of both substrate temperature and VHF power. In addition, the SiO₂ surface and SiO₂/Si interface roughnesses were comparable to those obtained in conventional dry oxidation at high temperatures.     

A Single Mutation at the Ferredoxin Binding Site of P450 Vdh Enables Efficient Biocatalytic Production of 25‐Hydroxyvitamin D3

Vitamin D₃ hydroxylase (Vdh) from Pseudonocardia autotrophica is a cytochrome P450 monooxygenase that catalyzes the two‐step hydroxylation of vitamin D₃ (VD₃) to produce 25‐hydroxyvitamin D₃ (25(OH)VD₃) and 1α,25‐dihydroxyvitamin D₃ (1α,25(OH)₂VD₃). These hydroxylated forms of VD₃ are useful as pharmaceuticals for the treatment of conditions associated with VD₃ deficiency and VD₃ metabolic disorder. Herein, we describe the creation of a highly active T107A mutant of Vdh by engineering the putative ferredoxin‐binding site. Crystallographic and kinetic analyses indicate that the T107A mutation results in conformational change from an open to a closed state, thereby increasing the binding affinity with ferredoxin. We also report the efficient biocatalytic synthesis of 25(OH)VD₃, a promising intermediate for the synthesis of various hydroxylated VD₃ derivatives, by using nisin‐treated Rhodococcus erythropolis cells containing Vdh_T107A. The gene‐expression cassette encoding Bacillus megaterium glucose dehydrogenase‐IV was inserted into the R. erythropolis chromosome and expressed to avoid exhaustion of NADH in a cytoplasm during bioconversion. As a result, approximately 573 μg mL^?1 25(OH)VD₃ was successfully produced by a 2 h bioconversion.     

Corrosion Behavior of Sialon Ceramics in Supercritical Water

The corrosion behavior of sialon ceramics was investigated in supercritical water at 450°C under 45 MPa for 2–50 h. α-sialon exhibited better corrosion resistance than β-sialon and α/β-sialon. Pitting corrosion with the formation of corrosion products was observed in the case of β-sialon and α/β-sialon. By contrast, the corrosion behavior of α-sialon was characterized by uniform corrosion with the formation of corrosion products. The degree of strength deterioration was strongly dependent on the corrosion morphology. The bending strength of α-sialon after corrosion for 30 h was about 90% of its initial strength, while the strength of β-sialon decreased to 65% of its original strength.     

Influence of cocations on catalytic activity of copper ion-exchanged ZSM-5 zeolite for reduction of nitric oxide with ethene in the presence of oxygen

The coexistence of alkaline earth (Ca and Sr) and transition metal (Fe, Co and Ni) cations with Cu ions in ZSM-5 zeolite is effective in the promotion of the maximum activity and the expansion of the active temperature range for the reduction of nitric oxide with ethene in the presence of excess oxygen.     

Clinical and pathological significance of numerical aberrations of chromosomes 11 and 17 in colorectal neoplasms

Numerical chromosome aberrations by interphase cytogenetic analysis have been reported in a few samples of colorectal neoplasms. No studies have defined a distinct relationship between these aberrations and clinicopathological features. To investigate the chromosome aberrations as a marker of invasiveness or prognosis, we conducted an interphase cytogenetic study using fluorescence in situ hybridization and examined 142 colorectal neoplasms consisting of 15 adenomas and 127 cancers. The target chromosomes were chromosomes 11 and 17. We also evaluated the nuclear DNA content as detected by flow cytometry, analyzed the relationship between the frequency of aneusomy and clinicopathological features, and examined the survival rate in these patients. The loss of chromosome 11 was observed in 31% of adenomas, whereas in cancers DNA aneuploidy was observed in 63% of cases, a gain of chromosome 17 was observed in 63% of cases, and a gain of chromosome 11 was observed in 42% of cases. Numerical chromosome aberrations in diploid DNA were also observed. Increased depth of invasion (>/=T3) and advanced Dukes' stage (>/=B) of malignant tumors were associated with a higher frequency of a gain of chromosome 11 (P < 0.01 and P < 0.05, respectively). Increased depth of invasion (>/=T2) in cancers was associated with a higher frequency of a gain of chromosome 17 (P < 0.05). Multivariate analysis of postoperative survival showed that a loss or gain of chromosome 11 was independently associated with a poor prognosis (P < 0.05). Numerical chromosome aberrations appear prior to the alteration of nuclear DNA content as detected by flow cytometry and influence the progression of colorectal cancers. Aneusomy of chromosome 11 is associated with poor postoperative prognosis of primary colorectal cancers.