Compressive strength and wear properties of SiC/Al6061 composites reinforced with high contents of SiC fabricated by pressure-assisted infiltration

Pressure-assisted infiltration was used to synthesize SiC/Al 6061 composites containing high weight percentages of SiC. A combination of PEG and glass water was used to fabricate SiC preforms and the effect of the presence of glass water on the microstructure and mechanical properties of the preforms was evaluated by performing compression tests on the preforms. Also, the compressive strength and the hardness of the SiC/Al composites were investigated. The results revealed that the glass water improved the compressive strength of the preforms by about five times. The microstructural characterization of the composites showed that the penetration of the aluminum melt into the preforms was completed and almost no porosity could be seen in the microstructures of the composites. Moreover, the composite containing 75 wt% SiC exhibited the highest compressive strength as well as the maximum hardness. The results of the wear tests showed that increasing the SiC content reduces the wear rate so that the Al-75 wt% SiC composite has a lower wear rate and a lower coefficient of friction than those of Al-67 wt% SiC composite. This indicated higher wear resistance in these composites than the Al alloy due to the formation of a tribological layer on the surface of the composites.     

In vitro antimicrobial effects of Myristica fragrans essential oil on foodborne pathogens and its influence on beef quality during refrigerated storage

Nutmeg (Myristica fragrans) seed was subjected to the hydro-distillation method to extract its essential oil (NEO). Its main constituents were α-pinene (20.16%), sabinene (14.45%), and β-pinene (13.26%) with great antimicrobial and antioxidant actions. A novel edible coating was then fabricated based on the sage seed mucilage (SSM) and NEO, to ameliorate the quality and shelf-life of beef slices. The NEO-loaded SSM coating was able to significantly decrease the population of total viable count, Escherichia coli, Staphylococcus aureus, psychrotrophic bacteria, and fungi. Moreover, lipid oxidation of beef slices was remarkably suppressed upon the application of bioactive NEO-loaded SSM edible coating, as compared with the control by Day 6. The coated beef sample, especially NEO-rich SSM coated ones perceived a higher consumer acceptance and firmness than the SSM coated and noncoated samples. The SSM edible coating containing NEO could therefore have the potential to control the growth of pathogenic microorganisms and lipid oxidation, and to improve the color stability and sensory properties of meat and meat products.     

Structural Characterization of Different Asphaltenes of Kuwaiti Origin

Asphaltenes obtained by precipitation from crude Kuwaiti oils have been analyzed by proton magnetic resonance (¹H-NMR), carbon-13 nuclear magnetic resonance (¹³C-NMR) and Infrared (IR) spectral techniques. The molecular weight and elemental analysis were also determined. These combined analytical data were used for the characterization of these Kuwaiti oils. The asphaltenes molecular weights range from approximately 4200-6500 with an H/C ratio of 0.91-1.1 with an average 45-71% aromatic carbons. The average side chain length was of 4-6 carbons. It can also be concluded that the asphaltenes under investigation contain 5-9 sets of condensed aromatic rings joined together by bridges of alkyl chains or other hetero atoms and the average number of each of these sets of condensed aromatic rings is nearly 7. There are a number of alicyclic rings and condensed alicyclic rings in asphaltene. The IR spectra showed main molecular groups including OH, NH, SH, C=O and aliphatic and aromatic C-H's.     

An experimental study of a cross-flow type plate heat exchanger for dehumidification/cooling

The thermal and dehumidification behaviour of a standard cross-flow type plate heat exchanger, intended for use as a dehumidifier/cooler, has been investigated both experimentally and numerically. Three sets of experiments have been carried out where air is blown into the primary and secondary sides of the exchanger, while water and liquid desiccant were being sprayed in a counter flow arrangement. The first set represents the indirect evaporative cooling of the primary stream by the secondary air stream. The second set is with liquid desiccant only and no indirect evaporative cooling. In the third set of experiments the primary air stream is indirectly evaporatively cooled by the secondary air stream and dehumidified by the liquid desiccant sprayed into the primary side of the exchanger. The above experiments indicate that the heat exchanger performs well when used with liquid desiccant. Furthermore, for an exchanger angle of 45°, there is an optimum value of air mass flow rate at which the effectiveness and dehumidification efficiency of the plate heat exchanger are maxima. To investigate the effect of the ambient air conditions on the PHE performance, further experiments were carried out using a heater element and a humidifier. The results show that under laboratory conditions the exchanger effectiveness and dehumidification efficiency increase with increasing primary air inlet temperature and humidity ratio. The experimental results were used to validate a computer model developed for the cross-flow type plate heat exchanger/dehumidifier. Comparison indicates that the numerical results are in good agreement with the experiments.     

Harmonic and intermodulation performance in an R-LED series network

Analytical expressions are obtained for predicting the harmonic and intermodulation performance of R-LED series networks. These expressions are in terms of the ordinary Bessel functions with arguments depenedent on the modulation index.     

Performance analysis of support vector machines classifiers in breast cancer mammography recognition

Support vector machine (SVM) is a supervised machine learning approach that was recognized as a statistical learning apotheosis for the small-sample database. SVM has shown its excellent learning and generalization ability and has been extensively employed in many areas. This paper presents a performance analysis of six types of SVMs for the diagnosis of the classical Wisconsin breast cancer problem from a statistical point of view. The classification performance of standard SVM (St-SVM) is analyzed and compared with those of the other modified classifiers such as proximal support vector machine (PSVM) classifiers, Lagrangian support vector machines (LSVM), finite Newton method for Lagrangian support vector machine (NSVM), Linear programming support vector machines (LPSVM), and smooth support vector machine (SSVM). The experimental results reveal that these SVM classifiers achieve very fast, simple, and efficient breast cancer diagnosis. The training results indicated that LSVM has the lowest accuracy of 95.6107 %, while St-SVM performed better than other methods for all performance indices (accuracy = 97.71 %) and is closely followed by LPSVM (accuracy = 97.3282). However, in the validation phase, the overall accuracies of LPSVM achieved 97.1429 %, which was superior to LSVM (95.4286 %), SSVM (96.5714 %), PSVM (96 %), NSVM (96.5714 %), and St-SVM (94.86 %). Value of ROC and MCC for LPSVM achieved 0.9938 and 0.9369, respectively, which outperformed other classifiers. The results strongly suggest that LPSVM can aid in the diagnosis of breast cancer.     

Mechanical characterization and modeling stress relaxation behavior of acrylic–polyurethane-based graft-interpenetrating polymer networks

The stress relaxation behavior of acrylic–polyurethane (PU)-based graft-interpenetrating polymer networks (IPNs) was characterized via dynamic mechanical analysis (DMA) and modeled using finite element method (FEM) analysis. Stress relaxation of glassy IPN specimens was experimentally studied under flexural testing, while rubbery IPN specimens were tested in tension. The effects of varying the styrene content in the acrylic copolymer phase, compatibility of the two phases in IPNs, and changing the concentration of acrylic copolymer and PU were studied. A higher percentage of styrene content resulted in higher homogeneity of IPN specimens, and decrease in initial modulus for acrylic copolymer specimens. Additionally, glassy IPN specimens with 90% styrene shows resistance to relaxation as high as acrylic copolymer samples. Experimental results were used to develop a numerical model to study stress relaxation response of specimens. While polymer systems have been studied computationally, numerical modeling of IPN systems is still in its infancy. A three-dimensional FEM model was developed using the Generalized Maxwell model and four-term Prony series constants, which were extracted from the stress relaxation experiments. With four terms in the Prony series, a good match was observed between experimental observations and results from the FEM model.     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

On ℤ2ℤ2[u]-additive codes

In this paper, a new class of additive codes which is referred to as ?₂ ?₂[u]-additive codes is introduced. This is a generalization towards another direction of recently introduced ?₂ ?₄-additive codes [J. Borges, C. Fernández-Córdoba, J. Pujol, J. Rif´a, and M. Villanueva, ?₂ ?₄-linear codes: Generator matrices and duality, Designs Codes Cryptogr. 54(2) (2010), pp. 167–179]. ?₂ ?₄-additive codes have shown to provide a promising class of codes with their algebraic structure and applications such as steganography. The standard generator matrices are established and by introducing orthogonality the parity-check matrices are also obtained. A MacWilliams-type identity that relates the weight enumerator of a code with its dual is proved. Furthermore, a Gray map that maps these codes to binary codes is defined and some examples of optimal codes which are the binary Gray images of ?₂ ?₂[u]-additive codes are presented.     

Analysing legal status of electronic agents in contracting through interactive websites: comparative study of American,English and EU laws developing Iranian legal system

In the modern world, electronic communications play a significant role in national and international electronic transactions. This issue has forced all legal systems to face up to many emerging legal problems in the context of electronic communications, such as the legal status of electronic agents in contracting electronically. Regarding the legal validity of e-contracts made through interactive websites, the legal status of electronic agents which play an important role in this process is questionable to see whether they are akin to real agents in the physical world or they are only a mere tool of communication. The current article tries to analyse this question by criticising a number of theories and some others based on the technical nature of the Internet, the traditional legal rules and principles and the UNCITRAL regulations on e-commerce and also the statues of American, English and EU laws on e-commerce to develop Iranian legal system.