Sequentially Enhanced Electrokinetic Remediation of Heavy Metals in Low Buffering Clayey Soils

This paper presents the results of an experimental investigation undertaken to evaluate different purging solutions to enhance the removal of multiple heavy metals, particularly chromium, nickel, and cadmium, from a low buffering clay, specifically kaolin, during electrokinetic remediation. Experiments were conducted on kaolin spiked with Cr(VI), Ni(II), and Cd(II) in concentrations of 1,000, 500, and 250 mg/kg, respectively, which simulate typical electroplating waste contamination. A total of five different tests were performed to investigate the effect of different electrode purging solutions on the electrokinetic remedial efficiency. A constant DC voltage gradient of 1 V/cm was applied for all the tests. The removal of heavy metals from the soil using tap water as the purging solution was very low. When 1 M acetic acid was used as the purging solution in the cathode, the removal of chromium, nickel, and cadmium was increased to 20, 19, and 13%, respectively. Using 0.1 M ethylene diamine tetraacetic acid as the purging solution in the cathode, 83% of the initial Cr was removed; however, the nickel and cadmium removal was very low. A sequentially enhanced electrokinetic remediation approach involving the use of water as a purging solution at both the anode and cathode initially, followed by the use of acetic acid as the cathode purging solution and a NaOH alkaline solution as the anode purging solution was tested. This sequential approach resulted in a maximum removal of chromium, nickel, and cadmium of 68–71, 71–73, and 87–94%, respectively. This study shows that the sequential use of appropriate electrode purging solutions, rather than a single electrode purging solution, is necessary to remediate multiple heavy metals in soils using electrokinetics.     

Assessment of electrokinetic removal of heavy metals from soils by sequential extraction analysis

Electrokinetic remediation of metal-contaminated soils is strongly affected by soil-type and chemical species of contaminants. This paper investigates the speciation and extent of migration of heavy metals in soils during electrokinetic remediation. Laboratory electrokinetic experiments were conducted using two diverse soils, kaolin and glacial till, contaminated with chromium as either Cr(III) or Cr(VI). Initial total chromium concentrations were maintained at 1000mg/kg. In addition, Ni(II) and Cd(II) were used in concentrations of 500 and 250mg/kg, respectively. The contaminated soils were subjected to a voltage gradient of 1 VDC/cm for over 200h. The extent of migration of contaminants after the electric potential application was determined. Sequential extractions were performed on the contaminated soils before and after electrokinetic treatment to provide an understanding of the distribution of the contaminants in the soils. The initial speciation of contaminants was found to depend on the soil composition as well as the type and amounts of different contaminants present. When the initial form of chromium was Cr(III), exchangeable and soluble fractions of Cr, Ni, and Cd ranged from 10 to 65% in kaolin; however, these fractions ranged from 0 to 4% in glacial till. When the initial form of chromium was Cr(VI), the exchangeable and soluble fractions of Cr, Ni and Cd ranged from 66 to 80% in kaolin. In glacial till, however, the exchangeable and soluble fraction for Cr was 38% and Ni and Cd fractions were 2 and 10%, respectively. The remainder of the contaminants existed as the complex and precipitate fractions. During electrokinetic remediation, Cr(VI) migrated towards the anode, whereas Cr(III), Ni(II) and Cd(II) migrated towards the cathode. The speciation of contaminants after electrokinetic treatment showed that significant change in exchangeable and soluble fractions occurred. In kaolin, exchangeable and soluble Cr(III), Ni(II), and Cd(II) decreased near the anode and increased near the cathode, whereas exchangeable and soluble Cr(VI) decreased near the cathode and increased near the anode. In glacial till, exchangeable and soluble Cr(III), Ni(II), and Cd(II) were low even before electrokinetic treatment and no significant changes were observed after the electrokinetic treatment. However, significant exchangeable and soluble Cr(VI) that was present in glacial till prior to electrokinetic treatment decreased to non-detectable levels near the cathode and increased significantly near the anode. In both kaolin and glacial till, low migration rates occurred as a result of contaminants existing as immobile complexes and precipitates. The overall contaminant removal efficiency was very low (less than 20%) in all tests.     

Optical design of a dynamic focus catheter for high-resolution endoscopic optical coherence tomography

The optical system design of a dynamic focus endoscopic probe for optical coherence tomography is reported. The dynamic focus capability is based on a liquid lens technology that provides variable focus by changing its curvatures in response to an electric field variation. The effects of a cylindrical exit window present, in practice, for a catheter were accounted for. Degradation in image quality caused by this window was corrected to get diffraction limited imaging performance. As a result, the dynamically focusing catheter with a lateral resolution ranging from 4 to 6 mum through an approximately 5 mm imaging distance was designed without mechanically refocusing the system.     

Enhanced Electrokinetic Remediation of Heavy Metals in Glacial Till Soils Using Different Electrolyte Solutions

Previous electrokinetic remediation studies involving the geochemical characterization of heavy metals in high acid buffering soils, such as glacial till soil, revealed significant hexavalent chromium migration towards the anode. The migration of cationic contaminants, such as nickel and cadmium, towards the cathode was insignificant due to their precipitation under the high pH conditions that result when the soil has a high acid buffering capacity. Therefore the present laboratory study was undertaken to investigate the performance of different electrolyte (or purging) solutions, which were introduced to either dissolve the metal precipitates and/or form soluble metal complexes. Tests were conducted on a glacial till soil that was spiked with Cr(VI), Ni(II), and Cd(II) in concentrations of 1,000, 500, and 250 mg/kg, respectively, under the application of a 1.0 VDC/cm voltage gradient. The electrolyte solutions tested were 0.1M EDTA (ethylenediaminetetraacetic acid), 1.0M acetic acid, 1.0M citric acid, 0.1M NaCl/0.1M EDTA, and 0.05M sulfuric acid/0.5M sulfuric acid. The results showed that 46–82% of the Cr(VI) was removed from the soil, depending on the purging solution used. The highest removal of Ni(II) and Cd(II) was 48 and 26%, respectively, and this removal was achieved using 1.0M acetic acid. Although cationic contaminant removal was low, the use of 0.1M NaCl as an anode purging solution and 0.1M EDTA as a cathode purging solution resulted in significant contaminant migration towards the soil regions adjacent to the electrodes. Compared to low buffering capacity soils, such as kaolin, the removal of heavy metals from the glacial till soil was low, and this was attributed to the more complex composition of glacial till. Overall, this study showed that the selection of the purging solutions for the enhanced removal of heavy metals from soils should be primarily based upon the contaminant characteristics and the soil composition.     

An analysis of Android adware

Journal of Computer Virology and Hacking Techniques - Most Android smartphone applications, or apps, are free—to generate revenue, advertisements are displayed when an app is used. Billions...