A simulation study of reduction kinetics for sponge iron production in a rotary hearth furnace

ABSTRACT

A mathematical model has been developed by coupling genetic algorithm (GA) with heat and material balance equations to estimate rate parameters and solid-phase evolution related to the reduction of iron ore-coal composite pellets in a multi-layer bed Rotary hearth Furnace (RHF). The present process involves treating iron ore-coal composite pellets in a crucible over the hearth in RHF. The various solid phases evolved at the end of the process are estimated experimentally, and are used in conjunction with the model to estimate rate parameters. The predicted apparent activation energy for the wustite reduction step is found to be lower than those of the reduction of higher oxides. The thermal efficiency is found to decrease significantly with an increase in the carbon content of the pellet. Thermal efficiency was also found to increase mildly up to three layers. Multilayer bed remains as a potential design parameter to increase thermal efficiency.     

Electromagnetic Resistive Drift Instability in Current Carrying Low Temperature Tokamak Edges

It is shown that the purely growing electrostatic rippling mode can couple with the shear Alfven wave to give rise to an oscillatory electromagnetic instability in tokamak edge regions. This mechanism can be one of the causes of electromagnetic fluctuations observed near plasma edges. This instability can occur only in the very low temperature regions where resistivity fluctuations can become important due to large electron-ion collision frequency.     

Mechanisms of resistance in a human cell line exposed to sequential topoisomerase poisoning

Camptothecins are a new class of anticancer drugs that target DNA topoisomerase I; current efforts are directed toward elucidating optimal combinations of these drugs with other antineoplastic agents. A rationale for the use of sequential therapy involving the combination of camptothecins with topoisomerase II-targeting drugs, such as etoposide, has arisen from observations of increased topoisomerase II protein levels in cell lines resistant to camptothecin. In an effort to understand potential mechanisms of resistance to this strategy, we developed a U-937 cell subline, denoted RERC, that is capable of surviving exposure to sequential topoisomerase poisoning. The RERC cells are 200-fold resistant to camptothecin, 8-fold resistant to etoposide, and 10-fold hypersensitive to cisplatin compared to the parental U-937 cells. Biochemical analyses indicate that the resistant phenotype involves alterations in both topoisomerase I and topoisomerase IIalpha. Topoisomerase I catalytic activity in the resistant cells is similar to that of the parental line but is resistant to camptothecin. Moreover, the resistant cells express a single mRNA species of topoisomerase I that codes for a mutation in codon 533. In addition, topoisomerase IIalpha protein levels are decreased 10-fold in the resistant line, coincident with a two-fold decrease in the expression of topoisomerase IIalpha mRNA. Collectively, these results indicate that resistance to sequential topoisomerase poisoning may involve a reduction in total cellular topoisomerase activity.     

Assessment of Bonelike® graft with a resorbable matrix using an animal model

Synthetic bone grafts have been developed to provide an alternative to autografts and allografts. Bonelike® is a patented synthetic osteoconductive bone graft that mimics the mineral composition of natural bone. In the present preliminary animal studies a user-friendly version of synthetic bone graft Bonelike® have been developed by using a resorbable matrix, Floseal®, as a vehicle and raloxifene hydrochloride as a therapeutic molecule, that is known to decrease osteoclast activity and therefore enhanced bone formation. From histological and scanning electron microscopy evaluations, the use of Bonelike® associated with Floseal® and raloxifene hydrochloride showed that new bone was rapidly apposed on implanted granules and also that the presence of the matrix and therapeutic molecule does not alter the proven highly osteoconductivity properties of Bonelike®. Therefore, this association may be one step-forward for the clinical applications of Bonelike® scaffolds since it is much more easy-to-handle when compared to granular materials.     

Fecal bile acid excretion and composition in response to changes in dietary wheat bran,fat and calcium in the rat

The effect and possible interactive influence of different dietary amounts of wheat bran, fat and calcium on the fecal excretion, concentration and composition of bile acids was studied in Fischer-344 rats. The fecal bile acids were analyzed using gas-liquid chromatography. Dietary wheat bran increased both total bile acid excretion and fecal weight without changes in fecal bile acid concentration. The proportion of fecal hyodeoxycholic acid decreased with increasing dietary fiber, whereas that of lithocholic and deoxycholic acids increased significantly with fiber intake. The percent content of fecal chenodeoxycholic acid did not change. Increasing dietary fat led to an increase in bile acid excretion without changes in either fecal weight or bile acid concentration. In contrast, the level of dietary calcium did not affect the total excretion of bile acids. However, since calcium increased the fecal weight, it consequently diluted bile acids and decreased their fecal concentration. Dietary fat and calcium had no influence on fecal bile acid composition. There were no interactive effects of wheat bran, fat and calcium on fecal bile acids. The finding in this study that dietary fiber, fat and calcium induce significant changes in fecal bile acids may be of relevance to the potential of bile acids to promote carcinogenesis.     

Hyperspectral imaging-based unsupervised adulterated red chili content transformation for classification: Identification of red chili adulterants

Neural Computing and Applications - Preserving red-chili quality is of utmost importance in which the authorities demand quality techniques to detect, classify, and prevent it from impurities. For...     

Investigations on the Three Commercial Species of Rosaceae

Physico-chemical properties of the seed oils of three species of Rosaceae family, namely Prunus armeniaca (apricot), Prunus cerasifera (prune), and Prunus persica (peach) have been determined. Fatty acid composition of the oils and amino acids composition of seed cake proteins have also been determined and their utility in every day life has been discussed.     

Diffusion of saturated hydrocarbons in low density polyethylene (LDPE) films

The diffusion coefficients at zero penetrant concentration, D₀, of n-heptane, n-heptane, n-octane, n-decane, and 2,2,4-trimethylpentane (TMP) in LDPE were obtained in the range of 25–50°C, using the desorption method. The dependence of D₀ on the size and shape of the penetrant is reported. It was found that D₀ decreases with increasing penetrant molecule size. The activation energies of diffusion in the temperature range of 25–50°C increase with increasing penetrant molecule size and are independent of temperature. The results are interpreted in terms of the free volume theory and semiquantitative estimates of the free volume parameters are reported.     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.