User activities and the heterogeneity of urban space:The case of Dahiyat Al Hussein park

Urban researchers have maintained a constant interest in the complexity and continuity of urban space usage. Some have applied actor–network theory (ANT) to investigate the heterogeneity of spaces and present them through the networks of their users’ activities. However, these accounts are predominantly limited in examining the extent to which these spaces may be heterogeneous when exploring such networks. This paper draws on recent ANT scholarship, which employs an ethnographic research conducted in a main park in a housing project at Dahiyat Al Hussein in Amman, Jordan. The findings describe the complex and unpredictable negotiations that occur within spaces by documenting the varieties and interrelations among user activity networks within this common and shared urban space. This research reveals the extent to which spaces, parks in this case, may be heterogeneous by unpacking their usage. The conclusions and insights assert the necessity of paying attention to design detail and creating designs that are responsive to evolving user activities.     

An alternative gibbs-duhem method for the calculation of activities from the redox data for iron oxide in ternary oxide systems

An alternative approach is presented in this article for the calculation of the activity of FeO, Fe₂O₃, and the other component in ternary oxide slags when the redox behavior of iron oxides is known. The approach avoids the use of the “tangent intercepts” to the iso-oxygen activity curves as required in Schuhmann's method. Favorable comparisons were obtained for the systems of FeO-Fe₂O₃-CaO and FeO-Fe₂O₃-SiO₂ between the isoactivity curves derived using this method and those established in previous work using Schuhmann's method. Direct calculation of the free energy of mixing from the redox data is also possible. An example is given for the FeO-Fe₂O₂-CaO system.     

Haemolytic activity of Aeromonas species isolated in Libya

Twenty seven Aeromonas strains (5A. hydrophila, 8A. sobria and 14A. caviae) isolated from children with diarrhoea and 34 Aeromonas strains (9A. hydrophila, 7A. sobria an 18A. caviae) isolated from children without diarrhoea were tested from haemolysin production. The results obtained showed that haemolysin production using human, horse or sheep erythrocytes was significantly associated with A.hydrophila and A sobria but not with A.caviae, regardless of whether these strains were isolated from children with or without diarrhoea. Human or horse rather than sheep erythrocytes are recommended for use in the haemolysin assay.     

The equilibrium partitioning of titanium between Ti3+ and Ti4+ valency states in CaO-SiO2-TiO x slags

The redox behavior of titanium in CaO-SiO₂-TiO _x melts was investigated using a slag-gas equilibrium technique. Titanium partitioning between Ti³⁺ and Ti⁴⁺ valency states and the ratio of activity coefficients of TiO_1.5 and TiO₂ were determined as functions of oxygen partial pressure, temperature, and slag composition. The equilibrium experiments were carried out at temperatures between 1783 and 1903 K under CO-CO₂-Ar gas atmosphere with oxygen partial pressure ranging from 10⁻¹² to 10⁻⁷ atm (1.01×10⁻¹⁰ kPa to 1.01×10⁻⁵ kPa). The slags had CaO/SiO₂ ratios between 0.55 and 1.35 and total titanium oxide concentrations from 7 to 50 mass pct. Experimental results showed that the Ti³⁺/Ti⁴⁺ ratio in CaO-SiO₂-TiO _x slags, containing up to 50 mass pct TiO _x , increased with decreasing oxygen partial pressure and decreased with increasing CaO/SiO₂ ratio and decreasing temperature. Measured variation of the redox ratio Ti³⁺/Ti⁴⁺ with oxygen partial pressure closely followed the ideal behavior. Increasing the CaO/SiO₂ ratio increased the ratio of activity coefficients of TiO_1.5 and TiO₂. The effect of total titania content on this ratio was more complex and in accord with Raman spectroscopy data.     

Fabrication of a biocompatible flexible electroosmosis micropump

In in-vivo microsystems, one of the components is a biocompatible micropump in order to produce the necessary force to deliver the fluid from the inlet to the outlet. In this contribution, a flexible micropump is fabricated which is aimed to be suitable in drug delivery applications. It provides high degree of biocompatibility, since the only employed materials are implantation grade polydimethylsiloxane elastomer and gold for the electrical interconnects. The working principle of the micropump is based on transverse DC electroosmosis which is a new variant of conventionally applied high voltage DC electroosmosis. This new technique is based on topography irregularities introduced in the channel resulting in a non-uniform charge distribution. The advantage is to drive the micropump using a relatively low DC voltage of 10 V while getting an effective flow speed of 60 μm/s. In order to characterize the flow speed, dyed 3 μm beads are dispersed in the working fluid and their speed is measured by the line scanning technique using a confocal microscope. It is also observed that the flow has a helical profile which is an attractive feature for an efficient micro-mixer in active microfluidics and μ-TAS applications.     

Ambient‐cured polyesteramide‐based anticorrosive coatings from linseed oil—A sustainable resource

Ambient‐cured polyesteramide (APEA) coating resin synthesized from dihydroxy fatty amide obtained from linseed oil, a sustainable resource, and poly(styrene‐co‐maleic anhydride), a bifunctional acid component, was found to exhibit improved physicomechanical and anticorrosive properties. The structural elucidation of APEA resin has been carried out by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopies. The physicomechanical and chemical resistance properties were investigated by standard methods. The corrosion resistance performance was evaluated in acid, alkali, and organic solvent. The thermal behavior was studied by TGA technique. A comparative study of these properties of APEA with reported baked polyesteramide (PEA) coatings was carried out. A remarkable improvement in the drying property of APEA was observed. The APEA coatings also showed improved physicomechanical and anticorrosive properties as compared to the baked PEA coatings. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1818–1824, 2005     

Multicast routing protocols in wireless mesh networks: a survey

Wireless mesh networks (WMNs) introduce a new type of network that has been applied over the last few years. One of the most important developing issues in WMNs is multicast routing, which is a key technology that provides dissemination of data to a group of members in an efficient way. In this article, after an introduction about the structure of a WMN, multicast routing algorithms and protocols in WMNs are surveyed in a detailed and efficient manner. Moreover, effort is made to scale the study into one of the important potential capabilities of multicast routing mechanisms in WMNs, which is taking advantage of using different channels and radios association. While nodes in a single-radio mesh network operating on single-channel have restrictions for capacity, equipping mesh routers with multiple radios using multiple channels can decrease the intention of capacity problem as well as increase the aggregate bandwidth available to the network and improving the throughput. Hence, the purpose of channel assignment is to decrease the interferences while increasing the network capacity and keeping the connectivity of the network. Therefore, this article investigates the multicast protocols considering a definition of three types of WMNs, based on channel-radio association including SRSC, SRMC and MRMC. In its follow, a classification for multicast routing algorithms regarding the achieved optimal solutions will be presented. Finally, a study of MRMC and its relevant problems will be offered, considering the joint channel assignment and the multicast tree construction problem.     

Improved extra group network: a new fault-tolerant multistage interconnection network

Supersystems are shown to provide enough computational power to solve complex problems on a real-time basis. In all these systems, the computational parallelism is obtained from multiple processors. Multistage interconnection networks (MINs) play a vital role on the performance of these multiprocessor systems. This paper introduces a new fault-tolerant MIN named as improved extra group network (IEGN). IEGN is designed by existing extra group (EGN) network, which is a regular multipath network with limited fault tolerance. IEGN provides four times more paths between any source–destination pairs compared with EGN. The performance of IEGN has been evaluated in terms of permutation capability, fault tolerance, reliability, path length, and cost. It has also been proved that the IEGN can achieve better results in terms of fault tolerance, reliability, path length and cost-effectiveness, in comparison to known networks, namely, EGN, augmented baseline network, augmented shuffle-exchange network, fault-tolerant double tree, Benes network, and Replicated MIN.     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

Thermal antioxidative kinetics of sesamol in triacylglycerols and fatty acid methyl esters of sesame,olive, and canola oils

Oxidation kinetics of the triacylglycerols (TAGs) and fatty acid methyl esters (FAMEs) of sesame, olive, and canola oils were studied in the presence of the different concentrations of sesamol (0.1%–0.16%) at 60, 80, and 100°C. Sesamol increased the temperature coefficient, T_C, and Q₁₀ number of the TAGs more significantly compared to the FAMEs. All the sesamol-added TAG and FAME systems, respectively, of the olive, canola, and sesame oils, respectively, exerted increased values of the Arrhenius (activation energy, E_a, and frequency factor, A) and Eyring (enthalpy, ΔH⁺⁺, and entropy, ΔS⁺⁺) equation parameters. Sesamol improved the Gibbs free energy (ΔG⁺⁺) of the activated complex formation in the canola, sesame, and olive systems, respectively, and the effect was greater in the FAMEs.