The Inflammatory Profile of Obesity and the Role on Pulmonary Bacterial and Viral Infections

Obesity is a globally increasing health problem, entailing diverse comorbidities such as infectious diseases. An obese weight status has marked effects on lung function that can be attributed to mechanical dysfunctions. Moreover, the alterations of adipocyte-derived signal mediators strongly influence the regulation of inflammation, resulting in chronic low-grade inflammation. Our review summarizes the known effects regarding pulmonary bacterial and viral infections. For this, we discuss model systems that allow mechanistic investigation of the interplay between obesity and lung infections. Overall, obesity gives rise to a higher susceptibility to infectious pathogens, but the pathogenetic process is not clearly defined. Whereas, viral infections often show a more severe course in obese patients, the same patients seem to have a survival benefit during bacterial infections. In particular, we summarize the main mechanical impairments in the pulmonary tract caused by obesity. Moreover, we outline the main secretory changes within the expanded adipose tissue mass, resulting in chronic low-grade inflammation. Finally, we connect these altered host factors to the influence of obesity on the development of lung infection by summarizing observations from clinical and experimental data.     

A Comparative Study of Mechanical Properties,Thermal Conductivity,Residual Stresses,and Wear Resistance of Aluminum-Alumina Composites Obtained by Squeeze Casting and Powder Metallurgy

Squeeze casting and powder metallurgy techniques were employed to fabricate AlSi12/Al₂O₃ composites, which are lightweight structural materials with potential applications in the automotive industry. The impact of the processing route on the material properties was studied. Comparative analyses were conducted for the Vickers hardness, flexural strength, fracture toughness, thermal conductivity, thermal residual stresses, and frictional wear. Our results show that the squeeze cast composite exhibits superior properties to those obtained using powder metallurgy.

     

Effect of Tempering and Strain on Decomposition of Metastable Austenite in X210CrW12 Thixo-Cast Steel

Thixoforming of hot rolled X210CrW12tool steel led to the formation of globular austenitic grains (82.4 vol.%) surrounded by eutectic mixture (α-Fe and M₇C₃ carbides). The thixo-cast steel reached compression strength 4.8 GPa at plastic strain 34%. The analysis of pole figures after deformation indicated distinct texturization of microstructure in comparison with undeformed steel. Main texture components for austenite were {101}, 〈010〉, while ferrite did not reveal clearly formed orientation. DSC analysis confirmed that austenitic structure in the X210CrW12 steel was metastable and temperature of decomposition depended on the strain applied at 634 °C for the un-deformed sample and at 599 °C for sample compressed up to 4.8 GPa. Discontinuous transformation of austenite into perlite, that started mainly at grain boundaries and proceeded to the center, was the predominant mechanism responsible for the decomposition of globular grains in thixoformed X210CrW12 steel. The decomposition caused by tempering of supersaturated and severely strained steel led to obtaining characteristic product of transformation of higher hardness in comparison with only tempered sample. In the deformed sample the reaction started on slip bands and twins which revealed high density of defects, promoting precipitation of carbides, followed by local depletion in carbon as a result of α′- Fe formation. In contrast to non-deformed state they covered the area of grains. Two fronts of reaction α-Fe plate +M₃C → mixture of α-Fe and M₇C₃ carbides were also observed.     

Identification of Mg<Subscript>2</Subscript>Cu particles in Cu-alloyed austempered ductile iron

In the present work, the Mg₂Cu precipitates in copper-alloyed austempered ductile iron (ADI) were identified by analyzing techniques such as TEM and SEM with EDS. It was revealed that, in castings made of ADI-containing copper, highly dispersed particles of Mg₂Cu are formed, whose size does not exceed <1 μm. The research work was carried out on ductile iron that was austenitized at 900 °C, followed by austempering at 380 °C. The microstructure was investigated using various techniques, including optical microscopy, XRD, SEM, and TEM. In addition to this, the exhibited impact properties of castings with Cu, Ni, and Cu+Ni were also determined. This study casts a new light on the formation of the structure of Cu-alloyed ADI. The highly-dispersive and brittle Mg₂Cu particles that are located in the vicinity of the graphite nodules have a negative effect on the impact properties of ADI. It has also been shown that impact strength decreases from levels of 160-180 J (for copper-free ADI) to 90-120 J (for copper-and copper-nickel-alloyed ADI).     

Correction to: A Comparative Study of Mechanical Properties,Thermal Conductivity,Residual Stresses,and Wear Resistance of Aluminum-Alumina Composites Obtained by Squeeze Casting and Powder Metallurgy

Metallurgical and Materials Transactions A -     

Melt-spinning and semi-solid processing of bainitic steel

A steel with a chemical composition meant to form nanostructured bainite following appropriate heat treatment, was, cooled rapidly from the liquid phase (1550°C) using melt spinning and modified injection-suction methods, as well as from a semi-solid temperature (1430°C) through thixoforming. The hardness of the as-cast melt spun ribbons was ～960?HV due to a fine martensite–austenite mixture surrounded by three-dimensional skeleton-like primary carbides of length scale 0.2–0.3?µm. The suction-injection cast method led to a similar structure but less hard (780?HV) due to a lower cooling rate. The thixoformed material showed unmelted globular, fine grains and a fine eutectic mixture formed directly from the liquid phase. The variety of processed steel samples were tempered and their microstructures, examined.     

Critical assessment: opportunities in developing semi-solid processing: aluminium,magnesium, and high-temperature alloys

Semi-solid metal processing (SSM) is a modern metal forming technology offering net-shape metal components of complex geometry in a one-step operation. The process relies on the thixotropic behaviour of metals with non-dendritic microstructures in a wide semi-solid temperature range. The beneficial effects are currently exploited in aluminium and magnesium alloys. This alternative manufacturing route to casting and forging has generated high expectations regarding high melting alloys, although no conclusive results have been achieved so far. Current studies focus on a deep understanding of the fundamental basics of alloys in the semi-solid range, e.g. rheology, microstructural evolution, and the consequences of forming, e.g. relations between process parameters, microstructure, and properties. This critical assessment aims at defining the important needs for further development of SSM, and assessing current knowledge.     

The Effect of Thermo-Mechanical Treatment on Structure of Ultrahigh Carbon PM Steel

The effects of thermo-mechanical treatment on selected properties related to the structure of Fe-0.85Mo-0.65i-1.4C powder metallurgy (PM) steel are reported. Three kinds of initial microstructure of specimens, i.e., pearlite + ferrite + cementite, martensite + retained austenite and α + spheroidized cementite were examined. Processing was carried out on a plastometer-dilatometer Bähr machine by compression cylindrical specimens at 775 °C at a strain rate of 0.001 s^?1. X-ray diffraction was carried out with symmetrical Bragg-Brentano and grazing incident angle methods on a D8-Advance diffractometer with filtered radiation of cobalt CoK _α . The following features were determined: texture, density of dislocations, density of vacancies, lattice parameter of Fe _α and mean size of crystallites. Significant differences in structure were observed, especially in quenched specimen, as a result of the thermo-mechanical treatment. Regardless of initial state of the specimens, the determined properties were on a similar level. Crystallite size was in the range 97-106 nm, crystallite texture (I{200}/I{110}) × 10 = 1.15-1.62 and density of vacancies I{110}/I{220} = 7.06-7.52.     

Formation of a quasicrystalline phase in Al–Mn base alloys cast at intermediate cooling rates

Al-rich 94Al–6Mn and 94Al–4Mn–2Fe alloys were suction-cast to evaluate the feasibility of obtaining bulk quasicrystal-strengthened Al-alloys at intermediate cooling rates alloyed with non-toxic, easily accessible and affordable additions. The influence of different cooling rates on the potential formation of a quasicrystalline phase was examined by means of scanning and transmission electron microscopy, X-ray diffraction and differential scanning calorimetry. Increased cooling rates in the thinnest castings entailed a change in sample phase composition. The highest cooling rates turned out to be insufficient to form an icosahedral quasicrystalline phase (I-phase) in the binary alloy. Instead, an orthorhombic approximant phase occurred (L-phase). The addition of Fe to the 94Al–6Mn binary alloy enhanced the formation of a quasicrystalline phase. At intermediate cooling rates of 10²–10³ K/s, various metastable phases were formed, including decagonal and icosahedral quasicrystals and their approximants. Rods (1 mm in diameter) composed of I-phase particles embedded in Al matrix exhibited a hardness of 1.5 GPa, much higher than the 1.1 GPa of 94Al–6Mn.