Rating defence major project success: The role of personal attributes and stakeholder relationships

In this paper we develop and test a model of the associations between major project managers' personal attributes and project success in the context of the Australian Defence industry. In our model, emotional intelligence, cognitive flexibility and systemic thinking were hypothesised to relate to project success, mediated by internal and external stakeholder relationships. The model was tested in an online survey with 373 major project managers. Emotional intelligence and cognitive flexibility were found to be related to the development, quality and effectiveness of major project managers' relationships with both internal and external stakeholders; and these in turn were associated with their ratings of project success. Systemic thinking, however, had no relationship with either stakeholder relationships or project success. Additional research is needed to examine the contribution of a wider range of personal attributes to stakeholder relationships and project success, and to assess whether this model is applicable in other industries and types of projects.     

Wound drainage in the prevention of surgical wound infection following artificial pacemaker implantation

A study of the capability of the roll-over test to predict pregnancy-induced hypertension was undertaken using our private patients. Sixty primigravid and 60 multigravid patients were studied between the twenty-eighth and thirty-second week of gestations. These patients were chosen at random by one of our two nurses who conducted all these studies. All results were recorded but were not available to the physicians. Eighteen months later, after all study patients had delivered, the hospital charts and the patients' office records were evaluated to determine if preganancy-induced hypertension had occurred. In primigravid patients a positive test accurately predicted the later development of pregnancy-induced hypertension only 50 per cent of the time while a negative test accurately predicted that it would not develop 93 per cent of the time. In multigravid patients, only 25 per cent of the patients who had positive tests later developed hypertension. The negative test in multigravid patients was accurate 94 per cent of the time.     

Comparison of methods to determine CTOD for SENB specimens in different strain hardening steels

Methods for determining crack tip opening displacement (CTOD) given in national and international standards are compared for steels with a range of strain hardening characteristics. Crack tip opening displacement measurements were made from single‐edge notched bend notches using a silicone rubber casting method. The finite element model produced good agreements with predictions of these CTOD measurements. The versatility of the finite element model enabled CTOD from the original crack tip and the 45° intercept method to be compared. The 45° CTOD generally underestimates the original crack tip CTOD, and is less useful for conditions with stable crack extension. Apart from the high strain hardening material, CTOD calculated using BS 7448‐1, WES 1108 (JWES), and ASTM E1820 was slightly lower than the values determined from silicone measurements and modelling, which is conservative. ASTM E1820 gave the largest underestimation of CTOD, whilst BS 7448‐1 may be unsuitable for higher strain hardening steels, where the standard predicts higher CTOD than measured from the replica. JWES gives the most consistent estimation of CTOD for steels with a wide range of strain hardening values.     

Energy transfer processes from Yb3＋ to Ln3＋ （Ln=Er or Tm） in heavy metal glasses

Heavy metal glasses doubly doped with Yb3+ and Ln3+ ions(Ln=Er or Tm) were studied. Glass host matrices were limited to lead borate glass and lead germanate glass. Efficient resonant(Yb3+-Er3+) and non-resonant(Yb3+-Tm3+) energy transfer was observed for the studied systems. Near-infrared luminescence spectra at 1.53 μm(Er3+) and 1.9 μm(Tm3+) were detected under excitation of Yb3+ by 975 nm diode laser line. They corresponded to 4I13/2→4I15/2(Er3+) and 3F4→3H6(Tm3+) transitions of rare earth ions, respectively. The unusual large spectral linewidth nearly close to 110 nm for 4I13/2→4I15/2 transition of Er3+ ions in lead borate glass was obtained, whereas long-lived near-infrared luminescence at 1.53 μm was detected in lead germanate glass. Quite different situation was observed for Yb3+-Tm3+ doubly doped glasses. In contrast to lead borate glass, near-infrared(3F4→3H6) luminescence spectra were registered for Tm3+ ions in lead germanate glasses, only. These phenomena strongly depended on stretching vibrations of glass host, which was confirmed by FT-IR spectroscopy.     

Infrared-to-visible conversion luminescence of Er ions in lead borate transparent glass-ceramics

Transparent glass-ceramics were successfully prepared during controlled heat treatment of lead borate glasses. The PbF₂ particles were dispersed into a borate glass matrix which was evidenced by X-ray diffraction analysis. The phase identification revealed that crystalline peaks can be related to the orthorhombic PbF₂ phase. Green up-conversion luminescence due to the ⁴S_3/2–⁴I_15/2 transition of Er³⁺ ions was registered. In comparison to the precursor glass the luminescence intensity was considerably higher, whereas the luminescence linewidth slightly decreased in the studied oxyfluoride transparent glass-ceramics. It indicated that a part of the trivalent erbium was incorporated into the PbF₂ crystalline phase.     

Photoluminescence and energy transfer in transparent glass-ceramics based on GdF3:RE3+ (RE = Tb,Eu) nanocrystals

In the present work,the transparent oxyfluoride glass-ceramic samples containing GdF_3:RE~(3+)(RE=Tb,Eu) nanocrystals(nGCs) were fabricated via controlled heat-treatment of precursor xerogels prepared using a sol-gel method.The formation of GdF_3 nanocrystalline phase from gadolinium(III) trifluoroacetate was verified based on XRD measurements.The average crystal sizes calculated from Scherrer formula were estimated to～10 nm as well as～6 nm for Tb~(3+)-and Eu~(3+)-doped samples,respectively.The optical behavior of prepared sol-gel samples was evaluated based on photoluminescence excitation(PLE) and emission spectra(PL) as well as luminescence decay analysis.Obtained samples exhibit the ~5D_4→~7F_J(J=6-3,Tb~(3+))and the ~5D_0→~7F_J(J=0-4,Eu~(3+)) emission bands recorded within the visible spectral area under excitation at near-UV(393 nm(Eu~(3+)),351,369,378 nm(Tb~(3+))) as well as middle-UV illumination(273 nm(Gd~(3+))).Additionally,based on recorded decay curves,the luminescence lifetimes(τ_m) for the ~5D_4(Tb3+) and the ~5D_0(Eu~(3+))excited states were also evaluated.In general,recorded luminescence spectra and double-exponential character of decay curves for nGCs indicate a successful migration of Tb~(3+) and Eu~(3+) dopant ions from amorphous silicate framework to lowphonon energy GdF_3 nanocrystal phase.     

The effect of fatigue pre‐cracking forces on fracture toughness

Testing procedures for the determination of the fracture toughness of a material by monotonic loading of fatigue pre‐cracked specimens are well established in standards such as BS 7448, BS EN ISO 15653, ISO 12135, ASTM E1820 and ASTM E1921. However, a review of these standards indicates a wide range of permitted fatigue pre‐cracking forces, whilst the underlying assumption in each standard is that the pre‐cracking conditions do not affect the fracture toughness determined. In order to establish the influence of different fatigue pre‐cracking forces on the fracture toughness, tests were carried out on specimens from an API 5L X70 pipeline steel. Single‐edge notch bend specimens of Bx2B geometry were notched through thickness and tested at temperatures of +20 °C, ?80 °C and ?140 °C to show the fracture behaviour in different regions of the fracture toughness ductile‐to‐brittle transition curve. Fatigue pre‐cracking was conducted on a high‐frequency resonance fatigue test machine over a range of pre‐cracking forces permissible within the various standards and beyond. The results showed that an excessively high pre‐cracking force can result in a significant overestimation of the value of fracture toughness for material exhibiting brittle behaviour, whilst very low fatigue pre‐cracking forces appeared to result in an increase in scatter of fracture toughness. A review of standards indicated that there was a possibility to misinterpret the intention of the ISO 12135 standard and potentially use excessively high pre‐cracking forces. Suggested clarifications to this standard have therefore been proposed to avoid the risk of overestimating fracture toughness.     

Social benchmarking to improve river ecosystems

To complement physical measures or indices of river health a social benchmarking instrument has been developed to measure community dispositions and behaviour regarding river health. This instrument seeks to achieve three outcomes. First, to provide a benchmark of the social condition of communities' attitudes, values, understanding and behaviours in relation to river health; second, to provide information for developing management and educational priorities; and third, to provide an assessment of the long-term effectiveness of community education and engagement activities in achieving changes in attitudes, understanding and behaviours in relation to river health. In this paper the development of the social benchmarking instrument is described and results are presented from the first state-wide benchmark study in Victoria, Australia, in which the social dimensions of river health, community behaviours related to rivers, and community understanding of human impacts on rivers were assessed.