点阴极电场辅助阳极连接中的紧密接触面积和电流

用等效电路的方法研究了点阴极情况下的电场辅助阳极连接效应，计算了连接电流，连接孕育期和紧密接触面积，本文结果表明，连接初期电流迅速衰减，随后缓慢变小，直至某一稳定值，孕育期随温度上升指数下降，连接温度高时，孕育期将难以观察到；待连接表面之间紧密接触面积随时间延长而非线性扩展，紧密接触区域增大时，其边界向外推进速度渐小，而接触面积增加渐快。     

4-bit adder-accumulator at 41-GHz clock frequency in InP DHBT technology

A 41-GHz 4-b adder-accumulator test circuit implemented in InP double heterojunction bipolar transistor (DHBT) technology using 624 transistors is reported. High clock rates are obtained by combining the logic functions into pipelined latches. The adder-accumulator contains a single-level parallel-gated carry circuit that is used as a step toward reduced power consumption. The carry circuit has a maximum clock frequency of 55 GHz. The accumulator architecture employs modular, pipelined 2-b adders and is cascadable to 2 N-bits. The test circuit includes a 4-b digital to analog converter (DAC) that facilitates demonstration of high-speed operation.     

Disc filtration for separation of flocs from a moving bed bio-film reactor.

A Discfilter with 10 and 18 microm filter openings, respectively, was placed in parallel to a flotation plant for separation of biological flocs from a post-denitrifying Kaldnes Moving Bed Process, the last treatment step at the municipal wastewater treatment plant at Sj?unda, Malm?, Sweden. The effluent concentrations from the 10 and 18 microm filter were 2-5 and 2-8 mg SS L(-1), respectively, which is comparable to, or better than, the flotation plant. Comparison with experiences from activated sludge plants shows that the Discfilter works especially well after the Kaldnes process. Particle size distribution (PSD) studies show that particles larger than the filter openings of 10 and 18 microm are separated with approximately 90% efficiency, whereas most of the smaller particles pass the filter. This fact indicates that the major particle separation mechanism is physical blocking. These findings point to the possibility of improving the prediction of the separation efficiency by combining measurements of turbidity and suspended solids with particle size analysis.     

A process model for active brazing of ceramics: Part II Optimization of brazing conditions and joint properties

In the present investigation, the process model developed in Part I has been applied to evaluate the microstructure and strength evolution during active brazing of ceramics. As a starting point, reaction-layer growth is assumed to occur isothermally with no restrictions in the supply of reactive element. Different kinds of diagrams are then constructed to show how specific process variables (e.g. the heating and cooling period, the limiting layer thickness, and the diffusion mechanism) affect the growth kinetics. It is concluded that the key to improved joint properties lies in control of the reaction-layer thickness through optimization of the brazing conditions, and an illustration of this is given. This revised version was published online in November 2006 with corrections to the Cover Date.     

Sexual dimorphism of circulating somatotropin, insulin-like growth factor I and II, insulin-like growth factor binding proteins, and insulin: relationships to growth rate and carcass characteristics in growing lambs

The effects of sex and age on patterns of circulating somatotropin (ST) concentration and plasma IGF-I, IGF-II, insulin, and IGF binding protein-3 (IGFBP-3) were studied in ram, wether, and ewe lambs (n = 7 or 8) sampled at mean ages of 81 (I1) and 158 d (I2). Between 81 and 158 d of age, rams grew more rapidly than wethers (P < .01), and wethers grew more rapidly than ewes (P < .01). The sex differences in growth were reflected in empty body weight at slaughter: rams > wethers > ewes (P < .05). Mean plasma ST concentrations, ST pulse amplitude, and integrated plasma ST concentrations were greater (P < .05) in rams than in ewes at I1 and I2. Characteristics of the ST plasma profile in wethers were generally intermediate between those of rams and ewes. The interpulse interval was greater in ewes than in wethers at I2. The IGF-I and IGFBP-3 concentrations were greater in rams than in ewes at both sampling times. Plasma IGF-II was greater in ewes than in rams at I2. Mean plasma ST was approximately two thirds less at I2 than at I1 regardless of sex. Mean plasma ST and IGF-I at both ages were positively correlated with growth. Mean plasma ST at I2 was negatively correlated with fatness at slaughter. Sex and age significantly affected patterns of circulating ST and concentrations of IGF-I and IGFBP-3 in prepubertal growing lambs, under conditions for which growth rates and composition were also sexually dimorphic.     

Autocoro最新技术: e-save

能源成本上涨速度高于纱线价格上涨速度,Autocoro纺纱厂每年的能耗成本约占每年营业额的5％,主要能耗是电能.     

Isolation and Spectroscopic Characterization of Eu@C72

A new Eu-endohedral fullerene cage, namely, Eu@C₇₂, was synthesized, separated, and a single isomer, Eu@C₇₂-I, has been isolated by multi-step HPLC for the first time and characterized by LDI-TOF mass spectrometry, UV-Vis and EPR spectroscopy. Additionally, a second isomer, Eu@C₇₂-II, has been separated by HPLC and identified by LDI-TOF mass spectrometry.     

A histological and histomorphometrical evaluation of screw-type calciumphosphate (Ca-P) coated implants; an in vivo experiment in maxillary cancellous bone of goats

The bone response to different calcium phosphate (Ca-P) coated implants was evaluated in a goat animal model. Two types of plasma spray coatings were applied to a commercially pure titanium (cpTi) tapered, conical screw-design implant (BioComp^®); hydroxyapatite (HA-PS) and a dual coating, consisting of FA and HA (FA/HA-PS). In addition an amorphous RF magnetron sputter coating (Ca-P-a) and uncoated implants were investigated. Forty-eight implants were inserted in the maxilla of 12 adult female goats. After implantation periods of 3 and 6 months, the bone implant interface was evaluated histologically and histomorphometrically. After both implantation periods all plasma spray coated implants were maintained. On the other hand three Ca-P-a and two cpTi implants were lost. Histological examination revealed a better bone response to both plasma spray coated implants. Histomorphometrical evaluation confirmed this finding. At 3 and 6 months significantly higher percentages of bone contact (p<0.001, ANOVA) were measured for both plasma spray coated implants than for the cpTi and Ca-P-a implants, while no significant difference (p<0.05) existed between both implantation periods. Degradation of both plasma spray coatings was observed. Supported by the results, it is concluded that, although Ca-P coatings can improve the performance of dental implants, the presence of a Ca-P coating is not the only important factor for bone healing around implants placed in low density trabecular bone.