Comparative evaluation of extraction of tetra- and hexa-valent neptunium ions by CMPO in a room temperature ionic liquid

ABSTRACT

Solvent extraction studies were performed to understand the extraction behavior of Np⁴⁺ and NpO₂ ²⁺ from acidic feeds with CMPO (octyl (phenyl)-N,N-diisobutyl carbamoyl methyl phosphine oxide) dissolved in 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide, a water immiscible ionic liquid. Slope analyses on the distribution data revealed the extraction of ML₂ type species, where M = Np⁴⁺ or NpO₂ ²⁺, and L = CMPO. Studies were also carried out with Pu⁴⁺ and UO₂ ²⁺ under identical conditions. The nature of the extracted species was found to vary with the nature of the ionic species.     

An energy-efficient cloud system with novel dynamic resource allocation methods

The Journal of Supercomputing - In the last decade, cloud computing has brought enormous changes to people’s lives. Cloud computing gives a client-driven computational model. In this case,...     

Escherichia coli,Salmonella spp., and Staphylococcus aureus susceptibility to antimicrobials of human and veterinary importance in poultry sector of India

In India, little attention has been paid on antimicrobial resistance (AMR) in the context of developing “One Health” approach. Hence, utilizing multi-disciplinary approach, we assess the AMR level and dynamics/pattern of multi-drug resistance (MDR) in Escherichia coli, Salmonella spp., and Staphylococcus aureus circulating over the different stages of poultry in India. A total of 342 isolates including E. coli (n = 143), Salmonella spp. (n = 104), and S. aureus (n = 95) were recovered from fecal (n = 80) and cecal (n = 80) samples of chicken, collected across the different poultry-retail shops and poultry-farms located at urban and rural areas of Rajasthan, India, respectively. High rates of AMR to drugs that are critically/highly important both in human and veterinary medicine were observed among all the isolates. Upward trends in AMR prevalence was observed in poultry-retail shops than in poultry-farms. Notably, >90% of all the isolates were MDR, of particular, pattern/prevalence of MDR was substantially varied across the poultry-farms vs. poultry-retail shops. Our results indicate AMR including MDR to be common in E. coli, Salmonella spp., and S. aureus distributed frequently in poultry. The study encourages the formulation of national policy, programmes and further research with a “One Health” approach that can benefits to the human/animal and the environment.     

The hot blow forming of AZ31 Mg sheet: Formability assessment and application development

The hot blow forming of magnesium sheet offers significant opportunity for forming complex, lightweight parts for automotive applications. This paper characterizes the elevated-temperature formability of AZ31 magnesium sheet materials and the effect of processing conditions on the performance of these materials. In addition, magnesium sheet application development at General Motors Corporation is reviewed.     

High char‐yielding poly[acrylonitrile‐co‐(itaconic acid)‐co‐(methyl acrylate)]: synthesis and properties

Polyacrylonitrile terpolymers of various compositions consisting of acrylonitrile (AN), itaconic acid (IA) and methyl acrylate (MA) were synthesized by solution polymerization in dimethylsulfoxide. Increase in concentration of either IA or MA retarded the overall polymerization rate and the polymer molecular weight. The system consisting of AN + MA and varying IA concentration was more prone to retardation in comparison with the system composed of AN + IA with variable MA concentration. The retardation factors were quantified. Minor quantities of MA boost the reactivity of IA in the terpolymer system. The terpolymer was richer in MA vis‐à‐vis the feed. The thermal characteristics of the terpolymer were examined as a function of its composition. In contrast to the copolymer of AN and IA requiring 1–1.5 mol% IA, the terpolymer required an IA content of approximately 2.5 mol% for optimum thermal stability. The polymer with 90 mol% AN, 2.5 mol% IA and 7.5 mol% MA exhibited reasonably good char‐forming characteristics and thermal stability. The overall crystallinity and crystallite size of the polymers were found to decrease on incorporation of the comonomers. The ‘aromatization index’ of the copolymer increased with the temperature of pyrolysis through re‐organization of the tetrahydropyridine ladder structure. Copyright © 2005 Society of Chemical Industry     

Micro- and nanofabrication processes for hybrid synthetic and biological system fabrication

The application of micro- and nanofabrication processes to the development of hybrid synthetic and biological systems may enable the production of new devices such as controllable transporters, gears, levers, micropumps, or microgenerators powered by biological molecular motors. However, engineering these hybrid devices requires fabrication processes that are compatible with biological materials such as kinesin motor proteins and microtubules. In this paper, the effects of micro- and nanofabrication processing chemicals and resists on the functionality of casein, kinesin, and microtubule proteins are systematically examined to address the important missing link of the biocompatibility of micro- and nanofabrication processes needed to realize hybrid system fabrication. It is found that both casein, which is used to prevent motor denaturation on surfaces, and kinesin motors are surprisingly tolerant of most of the processing chemicals examined. Microtubules, however, are much more sensitive. Exposure to the processing chemicals leads to depolymerization, which is partially attributed to the pH of the solutions examined. When the chemicals were diluted in aqueous buffers, a subset of them no longer depolymerized microtubules and in their diluted forms still worked as resist removers. This approach broadens the application of micro- and nanofabrication processes to hybrid synthetic and biological system fabrication.     

Practical Equivalent Continuum Model for Simulation of Jointed Rock Mass Using FLAC3D

A simple practical equivalent continuum numerical model for simulating the behavior of jointed rock mass has been extended to three-dimensional using FLAC3D. This model estimates the properties of jointed rock mass from the properties of intact rock and a joint factor (Jf), which is the integration of the properties of joints to take care of the effects of frequency, orientation, and strength of joint. A new FISH function has been written in FLAC3D specifically for modeling jointed rocks using the Duncan and Chang hyperbolic model. This model has been validated first with simple element tests at different confining pressures for different rocks with different joint configurations. Explicit modeling of the joints has also been done in element tests and results obtained compare well with the results of equivalent continuum model and also with experimental results. Further, this has been applied for a case study of a large underground power house cavern in the Himalayas. The analysis has been done under various stages of excavation, assigning a null model available in FLAC3D for simulating the excavation.     

Triggering of cellulase biosynthesis by cellulose in Trichoderma reesei. Involvement of a constitutive, sophorose-inducible, glucose-inhibited beta-diglucoside permease

We prepared [U-14C]cellobiose by cultivating Acetobacter pasteurianus in the presence of [U-14C]glucose and hydrolyzing the [U-14C]cellulose formed with beta-glucosidase-free cellulase from Trichoderma reesei. This 14C-labeled cellobiose was used to investigate the presence of an uptake system for cellobiose in T. reesei. Evidence was obtained for the presence of a high affinity (Km for cellobiose 0.3 microM) but low activity (2.5 milliunits/mg fungal dry weight) cellobiose permease. The permease is formed constitutively, but higher levels are formed after addition of sophorose (glucosyl-beta-1,2-diglucoside), a reputed cellulase inducer. The permease appears to be specific for beta-diglucosides, as the uptake of [U-14C]cellobiose is inhibited by sophorose, gentiobiose (glucosyl-beta-1,3-glucoside), and cellobiose. Under these conditions, cellooligodextrines (n, 4-7; final concentration, 1 mM) are not inhibitors. Glucose, but no other monosaccharides, inhibits the permease. The hypersecretory mutant T. reesei RUT C-30 exhibits elevated permease activities, whereas in T. reesei QM 9979, a mutant strain defective in the induction of cellulases by cellulose or sophorose, strongly reduced permease activities were demonstrated. The results stress a hitherto not recognized point of control in the induction of cellulases by T. reesei at the level of uptake of cellulose oligosaccharides.     

Genetic mapping of a major susceptibility locus for juvenile myoclonic epilepsy on chromosome 15q

The epilepsies are a group of disorders characterised by recurrent seizures caused by episodes of abnormal neuronal hyperexcitability involving the brain. Up to 60 million people are affected worldwide and genetic factors may contribute to the aetiology in up to 40% of patients. The most common human genetic epilepsies display a complex pattern of inheritance. These are categorised as idiopathic in the absence of detectable structural or metabolic abnormalities. Juvenile myoclonic epilepsy (JME) is a distinctive and common variety of familial idiopathic generalised epilepsy (IGE) with a prevalence of 0.5-1.0 per 1000 and a ratio of sibling risk to population prevalence (lambda(s)) of 42. The molecular genetic basis of these familial idiopathic epilepsies is entirely unknown, but a mutation in the gene CHRNA4, encoding the alpha4 subunit of the neuronal nicotinic acetylcholine receptor (nAChR), was recently identified in a rare Mendelian variety of idiopathic epilepsy. Chromosomal regions harbouring genes for nAChR subunits were therefore tested for linkage to the JME trait in 34 pedigrees. Significant evidence for linkage with heterogeneity was found to polymorphic loci encompassing the region in which the gene encoding the alpha7 subunit of nAChR (CHRNA7) maps on chromosome 15q14 (HLOD = 4.4 at alpha = 0.65; Z(all) = 2.94, P = 0.0005). This major locus contributes to genetic susceptibility to JME in a majority of the families studied.