Correction to: “SPOCU”: scaled polynomial constant unit activation function

Neural Computing and Applications - Addendum on SPOCU fitting and Erratum.     

MIG Brazing of Galvanized Thin Sheet Joints for Automotive Industry

MIG welding of zinc-coated thin plates in the automotive industry leads to major issues, mainly zinc evaporation followed by a decrease of corrosion resistance, as well as residual strains and stresses difficult to minimize. The use of a lower heat input technique for joining galvanized steels would bring significant benefit, if the final overall mechanical properties of the joints are adequate for the application. The use of MIG brazing (MIGB) with the recently commercialized alloyed copper-based filler metal is an alternative worth considering. The present paper addresses the MIGB processes, describing the influence of the different shielding gases and the process parameters on the mechanical, corrosion, and metallurgical properties of the joint, when lower heat input procedures are targeted. The paper describes the influence of the gases on the mechanical properties of the brazed joint, both in normal conditions after joining and after corrosion in a salt water environment. Microstructural features of the different zones are discussed. Results of corrosion and tensile tests are presented and interpreted.     

Expression profiles of effector proteins SopB, SopD1, SopE1, and AvrA differ with systemic, enteric, and epidemic strains of Salmonella enterica

The presence and expression of sopB, sopD1, sopE1, and avrA genes encoding virulence associated effector proteins were studied comparatively in 405 Salmonella enterica strains. They belong to different serovars and clonal types (genotypes, phage types) and originated from different clinical (systemic infection, focal enteritis, enterocolitis) and epidemic sources (epidemics, sporadic cases). The sopB and sopD1 determinants were commonly prevalent, but sopE1 and avrA genes only in 55% and 80%, respectively. A correlation of this pattern of absence and presence of the respective genes to the epidemic and clinical origin could not be detected. In contrast, the expression of the respective genes appeared differently: SopB and SopE1 proteins are well produced, but SopD1 and AvrA proteins only rarely under the applied standard culture conditions. However, using a range of different environmental signals (temperature, pH, cations, etc.) some of the S. enterica nonproducer strains (e. g., S. Agona, S. Bovismorbificans, S. Virchow, etc.) begin to produce AvrA and SopD1. They turned now into an expression profile which was found typically for the epidemic strains of S. Typhimurium and S. Enteritidis. Also S. enterica strains from systemic infections could be characterized by their strong SopB and SopE1 expression while SopD1 and AvrA proteins were missing. Although it is premature to outline generally a correlation of these expression profiles and the clinical and epidemiological potency of Salmonellae, the reported results allow a first understanding how a fine tuning of their virulence will take place.     

Homogeneity analysis in a Korte--Schmidt-type integrating gold sphere

Homogeneity measurements in a gold-coated integrating sphere at eight wavelengths in the range from 400 to 2000 nm are presented and discussed. The inner sphere wall was scanned with a mirror-based internal sphere scanner at 288 different positions. The spatially resolved measurements show the transition from poor reflectivity, associated with large inhomogeneities at 400 nm, to high reflectivity in the infrared region at 2000 nm, associated with only small deviations. From the measurements the spectrally dependent relative uncertainty of the radiance of the inner sphere wall was deduced. A spectrally dependent sphere homogeneity correction factor F(lambda) relative to a specific point within the sphere wall was also derived.     

Grain Size Dependence of Electrical Conductivity in Polycrystalline Cerium Oxide

The magnitude and activation energy of electrical conductivity in nanocrystalline cerium oxide exhibit a clear grain size dependence. Experimental results compiled from the literature were analyzed using a space charge model, which takes into account the deviation of point defect concentrations from their bulk values in the vicinity of grain boundaries. The consequences on conductivity arising from such space charge layers were calculated using the brick-layer model (BLM) for grain sizes L large compared to the screening length . The obtained results were supplemented by the calculated conductivity in the flat-band limit for L . This combination allowed for a quantitative comparison with experimental values, which were obtained in the mesoscopic regime of grain sizes from 10–40 nm. The analysis yielded a value for the space charge potential in cerium oxide of 0.55 V. This space charge potential is caused by a reduced standard chemical potential of oxygen vacancies in the grain boundary core as compared to the bulk phase.     

Upregulation of osteopontin expression in renal cortex of streptozotocin-induced diabetic rats is mediated by bradykinin

The model of streptozotocin (STZ)-induced diabetes in Wistar rats was used to study the expression of osteopontin during development of diabetic nephropathy. Diabetes was confirmed by serum glucose levels exceeding 16 mmol/l during the experimental period of 12 weeks. During this period of time, diabetic nephropathy developed, as characterized by a reduced glomerular filtration rate (2.7 +/- 0.3 ml/min in controls vs. 1.7 +/- 0.1 ml/min in diabetic rats) and proteinuria (8.3 +/- 1.7 mg/24 h in controls vs. 22.0 +/- 4 mg/24 h in diabetic rats). Northern blot analysis revealed a time-dependent upregulation of renal cortical osteopontin expression reaching 138 +/- 6% of control levels after 2 weeks and 290 +/- 30% (mean +/- SE, n = 6-9) after 12 weeks. By immunostaining, the increased osteopontin expression could be located to the tubular epithelium of the renal cortex. Chronic treatment of animals with ramipril (3 mg/kg) during the 12-week experimental period led to a further increase in osteopontin mRNA expression in diabetic animals, amounting to 570 +/- 73% (mean +/- SE, n = 6) of controls. Increased levels of osteopontin were not associated with accumulation of monocyte/macrophages that were identified by the cell type specific monoclonal antibody ED-1. The increased osteopontin expression in ramipril-pretreated rats was abolished by application of the bradykinin B2-receptor antagonist, icatibant (0.5 mg/kg). In addition, increased osteopontin expression in diabetic rats, which did not receive any treatment after STZ injection, could as well be reduced by icatibant given for the final 2 weeks of the experimental period. These data suggest that a strong bradykinin B2-receptor-mediated upregulation of osteopontin occurs during the pathogenesis of experimental diabetic nephropathy in rats.     

Auditory-evoked potentials as indicator of brain serotonergic activity--first evidence in behaving cats

Due to the increasing importance of the central serotonergic neurotransmission for pathogenetic concepts and as a target of pharmacotherapeutic interventions in psychiatry, reliable indicators of this system are needed. Several findings from basic and clinical research suggest that the stimulus intensity dependence of auditory evoked potentials (AEP) may be such an indicator of behaviorally relevant aspects of serotonergic activity (Hegerl and Juckel 1993, Biol Psychiatry 33:173-187). In order to study this relationship more directly, epidural recordings over the primary and secondary auditory cortex were conducted in chronically implanted cats under intravenous (i.v.) administration of drugs influencing the serotonergic and other modulatory systems (8-OH-DPAT, m-CPP, ketanserin, DOI, apomorphine, atropine, clonidine). The intensity dependence of the cat AEP component with the highest functional similarity to this of the N1/P2-component in humans was significantly changed by influencing 5-HT1a and 5-HT2 receptors, but not 5-HT1c receptors. This serotonergic modulation of the intensity dependence was only found for the primary auditory cortex which corresponds to the known different innervation of the primary and secondary auditory cortex by serotonergic fibers. Our study supports the idea that the intensity dependence of AEP could be a valuable indicator of brain serotonergic activity; however, this indicator seems to be of relative specificity because at least cholinergic effects on the intensity dependence were also observed.     

Modeling resistive switching materials and devices across scales

Resistance switching devices based on electrochemical processes have attractive significant attention in the field of nanoelectronics due to the possibility of switching in nanosecond timescales, miniaturization to tens of nanometer and multi-bit storage. Their deceptively simple structures (metal-insulator-metal stack) hide a set of complex, coupled, processes that govern their operation, from electrochemical reactions at interfaces, diffusion and aggregation of ionic species, to electron and hole trapping and Joule heating. A combination of experiments and modeling efforts are contributing to a fundamental understanding of these devices, and progress towards a predictive understanding of their operation is opening the possibility for the rational optimization. In this paper we review recent progress in modeling resistive switching devices at multiple scales; we briefly describe simulation tools appropriate at each scale and the key insight that has been derived from them. Starting with ab initio electronic structure simulations that provide an understanding of the mechanisms of operation of valence change devices pointing to the importance of the aggregation of oxygen vacancies in resistance switching and how dopants affect performance. At slightly larger scales we describe reactive molecular dynamics simulations of the operation of electrochemical metallization cells. Here the dynamical simulations provide an atomic picture of the mechanisms behind the electrochemical formation and stabilization of conductive metallic filaments that provide a low-resistance path for electronic conduction. Kinetic Monte Carlo simulations are one step higher in the multiscale ladder and enable larger scale simulations and longer times, enabling, for example, the study of variability in switching speed and resistance. Finally, we discuss physics-based simulations that accurately capture subtleties of device behavior and that can be incorporated in circuit simulations.