Flux Jumps and H-T Diagram of Instability for MgB2

We present a study of magneto-thermal instabilities in polycrystalline MgB₂ superconductor, by magnetic hysteresis loop measurements and by investigations of magnetic flux dynamics with a miniature Hall probe. Temperature and magnetic field ranges where the flux jumps may be observed have been determined. On the basis of measurements of the magnetic flux dynamics, an average magnetic diffusivity describing the process of the flux jump is estimated. This parameter is compared with the thermal and magnetic diffusivities calculated on the basis of available data for thermal conductivity, heat capacity and resistivity. It is shown that the estimated value of the field of the first flux jump is influenced significantly by the field dependence of specific heat. In order to explain the observed phenomenon, the temperature reached by the sample during the flux jump at different magnetic fields is calculated.     

俄联邦防爆电气设备——对照国际标准俄国国家标准的修改、差异和独特性

1 俄联邦防爆电气设备应用情况 传统上快速发展的工业部门如进行石油和天然气生产、运输以及加工处理的那些部门、石油化工行业，以及很多可能出现爆炸性环境的其他行业，在其一些场所中需要使用防爆电气设备。     

Construction of the TUK-84 shipping assembly

The construction and basic technical characteristics of the TUK-84 assembly are described. The materials used to fabricate the vessel parts and sealing components are presented, and the composition and operation of the system which monitors the technical parameters are described. The construction of the rolled layers (courses) is discussed and their advantages are shown. __________ Translated from Atomnaya énergiya,Vol. 100, No. 6, pp. 419–422, June, 2006.     

The effects of a “distinct window” screen design on computer-mediated group decision making

An experiment was performed to test a distinct-window conferencing screen design as an electronic cue of social status differences in computer-mediated group decision-making. The screen design included one distinct window to symbolize high-status, and two nondistinct windows to symbolize low-status. The results indicated that the distinct-window screen design did produce status affects in groups of peers making decisions on judgmental problems. Randomly assigned occupants of the distinct window had greater influence on group decisions and member's attitudes than occupants of nondistinct windows.The authors would like to thank Shyam Kamadolli and Phaderm Nangsue, the programmers who developed the software used in this experiment. We would also like to thank the editor and our three anonymous reviewers for exceedingly helpful comments on an earlier draft of this article.     

Halogenated Ti3C2 MXenes Prepared by Microwave Molten Salt for Hg0 Photo-Oxidation

Ti₃C₂ MXenes with different halogen modifications are prepared rapidly and efficiently by microwave molten salt method, and the MXene surface functional group modification is successfully achieved to address the problems of low purity, complex functional groups, and uncontrollable energy band structure of MXenes obtained by traditional liquid phase etching. Among them, the modification of the iodine (I) functional group onto the surface of Ti₃C₂ changes the energy band structure and band gap, resulting in easier photoexcitation and more photogenerated carriers. The increased Fermi energy is closer to the conduction band, the decreased surface work function weakens the electron confinement ability. The photogenerated carriers can migrate to the surface of the material more easily with extended lifetime, so the activity of the catalyst is improved. Further, for gaseous monomeric mercury (Hg⁰) photo-oxidative removal, Ti₃C₂-I₂ exhibits 85.5% efficiency of Hg⁰ photo-oxidative removal under visible light. Based on the experimental characterization and density functional theory calculations, a mechanism for the photo-oxidative removal of Hg° from Ti₃C₂-I₂ MXene is proposed, which provides a valuable strategy for studying Ti₃C₂ MXenes in the field of photocatalysis.     

Local effects in the vicinity of inserts in sandwich panels

The paper considers local bending effects induced in the vicinity of inserts in sandwich panels. Such local bending effects are associated with an increase of bending stresses in the sandwich faces and normal and shear stresses in the sandwich core. An earlier developed analytic model [Proceedings of the Sixth International Conference on Sandwich Structures (ICSS-6) (2002) 551] is adapted for the case of a sandwich panel with circular insert, with elastic properties differing from those of the core. The locally induced stresses in the faces and core due to presence of the insert are expressed via simple analytic relations (and charts) enabling an estimation of these local stresses. Finite element analysis is employed to demonstrate the applicability of the analytic model, and a good correspondence between the numerical and the analytical data is found. A study case related to marine applications, namely a circular insert in a sandwich deck panel used for mounting of a rigging fixture, is considered, and optimization of an existing design is carried out.     

Lime production in a MAK-90 sintering machine

The production of lime by bed roasting in a MAK-90 sintering machine is considered. The thermal and material balances of the process are analyzed. The thermal system of the sintering machine is modernized so as to permit lime production, with reduction in the power consumption and considerable decrease in dust emission.