Nonlinear Optical Properties of TeO2-Based Glasses: MOx-TeO2 (M = Sc, Ti, V, Nb, Mo, Ta, and W) Binary Glasses

The third-order nonlinear optical susceptibilities, X⁽³⁾, of TeO₂-based glasses containing transition metal oxides (M = Sc₂O₃, TiO₂, V₂O₅, Nb₂O₅, MoO₃, Ta₂O₅, and WO₃) glasses have been measured by the third harmonic generation (THG) method in order to investigate the effect of the empty d-orbital contributions to the third-order nonlinear optical susceptibilities. It is found that the addition of TiO₂, Nb₂O₅, and WO₃ to TeO₂ glass increases the X⁽³⁾ value as well as the refractive index, while others decrease both of them. The positive effect of the TiO₂, Nb₂O₅, or WO₃, on the X⁽³⁾ of TeO₂ glass was interpreted in terms of the cationic empty d-orbital contribution. There is an almost linear relation between the X⁽³⁾ and the term (n²_ω+ 2)³.(n²_ω -1).E_d/E²₀ containing three measurable parameters only, irrespective of the kinds of MO, which was derived based on the bond orbital theory developed by M. E. Lines. The largest X⁽³⁾ value obtained is 1.69 × 10⁻¹² esu for 30NbO_2.5.70TeO₂ glass, about 60 times larger than that of pure fused silica glass.     

Permeation of Zidovudine and Probenecid from Oily Bases Containing Alcohols Through Rat Skin

Permeation of zidovudine (3'-azido-3'-deoxythymidine, AZT) and probenecid from oily bases containing an alcohol through rat skin was examined. Isopropyl myristate (IPM), as an oily vehicle, showed a penetration enhancing effect for AZT and probenecid. Ethanol, n-propanol, and n-butanol were used as additives in IPM and were examined for their own permeation and the enhancing effect on the permeation of AZT and probenecid. The skin permeation of AZT and probenecid from IPM was enhanced by addition of the alcohol in IPM. The degree of the enhancement was decreased with increasing lipophilicity of the alcohol used. me permeation rate of the drug from those systems was shown to be governed by penetration-enhancing effects of the oily base and alcohol, and the penetration of the alcohol itself through the skin.     

Data fitting with a spline using a real-coded genetic algorithm

To obtain a good approximation for data fitting with a spline, frequently we have to deal with knots as variables. The problem to be solved then becomes a continuous nonlinear and multivariate optimization problem with many local optima. Therefore, it is difficult to obtain the global optimum. In this paper, we propose a method for solving this problem by using a real-coded genetic algorithm. Our method can treat not only data with a smooth underlying function, but also data with an underlying function having discontinuous points and/or cusps. We search for the best model among candidate models by using the Bayes Information Criterion (BIC). With this, we can appropriately determine the number and locations of knots automatically and simultaneously. Five examples of data fitting are given to show the performance of our method.     

Photoelectrochemical properties of sol–gel-derived Ti1−xVxO2 solid solution film photoelectrodes

Ti_1−xV_xO₂ solid solution film photoelectrodes were prepared by the dip-coating sol–gel method. X-ray diffraction and X-ray photoelectron spectroscopy were employed to ensure the formation of the solid solution and their composition. Obvious photoresponses were observed in the visible region for the solid solution film electrodes with x0.05 and the red shift of the photoresponse was enhanced with increasing x. Moreover, the solid solution film electrodes were found to be photoelectrochemically stable. However, the onset potential of photocurrent shifted positively with increasing x. Band model of the solid solution was suggested to explain the effects of the vanadium incorporation on the photoelectrochemical properties.     

Transdermal Absorption of Zidovudine from Ethanol-Isopropyl Myristate Mixed System and Influence of Probenecid on It in Rats

Transdermal absorption of zidovudine (AZT) from an ethanol-isopropyl myristate (IPM) mixed system was examined in rats. For comparison of bioavailability (BA) after topical applications, 0.25 ml of the ethanol/IPM system containing 40% ethanol and 60 mM AZT was applied as a standard formulation. Values of the area under the plasma concentration-time curves of AZT for 8 hr (AUC_0-8), as indices of BA, following application of various formulations were compared with that of the standard formulation. Then the influence of content of the drug and ethanol, and application volume of the system was evaluated. BA was effectively improved only when the total amount of ethanol applied on the skin was increased. On the other hand, simultaneous transdermal application of AZT and probenecid increased the AU_0-8, of AZT without necessitating the increase in ethanol content in the formulation. In addition, coadministered probenecid improved cerebrospinal fluid/plasma concentration ratio of AZT.     

Synthesis of boron nitride from triammoniadecaborane and hydrazine under pressure

Boron nitride (BN) of low crystallinity was synthesized from triammoniadecaborane (TAD) and hydrazine at 125 MPa below 650° C. TAD itself was pyrolysed at 600° C and 125 MPa to form a mixture of amorphous boron and boron nitride containing BH and NH bonds. The infrared spectrum of the pyrolysed product of TAD itself at 600° C and 125 MPa showed the BNB absorption at 800cm^–1 due to the formation of B₃N₃ structures. The X-ray diffraction (XRD) of the reaction product from TAD and hydrazine at 600° C had broad diffractions centred at 2=25.5° and 43.0° (CuK). The BH absorption at 2500cm^–1 decreased in intensity on increasing the N/B ratio from 0.3 to 0.85, and disappeared finally at a ratio of N/B=1.3. The reaction product at 125 MPa had a porous structure. The electron diffraction of the specimen changed from faint rings to spots on circular rings after heat treatment at 800° C for 10 h. The heat-treated specimen, however, did not give sharp reflections corresponding to hexagonal BN in the XRD profile. BN of low crystallinity was transferred to cubic BN at 1200° C and 6.5 GPa in a 90% yield, which was higher than that of well-crystallized BN in the presence of AIN.     

Preparation of multiple oxide BaTiO3 fibres by the sol-gel method

Multiple oxide BaTiO₃ gel fibres were prepared by the sol-gel method from Ba(OC₂H₅)₂-Ti(O-isoC₃H₇)₄-H₂O-C₂H₅OH-CH₃COOH and Ba(CH₃COO)₂-Ti(O-isoC₃H₇)₄-H₂O-CH₃COOH solutions. Relatively long gel fibres of 10cm length were obtained from both solutions in the limited composition region. The latter solution in particular showed a spinnability even when it contained no water. Therefore, the occurrence of spinnability of the solution was considered to be due to the formation of linear polymers composed of bridging acetate groups such as TiO-C(CH₃)-O-Ti rather than metalloxane bonding as Ti-O-Ti. Addition of water to the solutions seems to break the bridging acetate bonds and replace some of them by bridging oxygen bonds. The as-drawn gel fibres which were X-ray amorphous crystallized into BaTiO₃ ceramic fibres of 5mm average length upon heating above 600 ° C. However, the gel fibres drawn from the sols without water became powdery on heating because of the lack of Ti-O-Ti metalloxane bonds. The crystallization behaviour of the BaTiO₃ gel fibres is discussed based on the infrared spectroscopy, X-ray diffraction analysis and thermogravimetric-differential thermal analysis.     

Structural changes of glass-ceramics of the Cu2O-Al2O3-SiO2 system on heating in air

The behaviour of copper ions in low thermal expansion glass-ceramics prepared from Cu₂O · Al₂O₃ ·_nSiO₂ glasses, or in-spodumene type Cu₂O · Ae₂O₃ ·nSiO₂ crystals included in the glass-ceramics on heating in air was investigated. On hewing at 300 to 500° C, the copper ions behaved as in the corresponding glasses. Cuprous ions in the glass-ceramics or-spondumene type crystals were oxidized into the cupric state, and at the same time an equal amount of cuprous ions to those oxidized were expelled out of the specimen for the requirement of electrical charge neutrality and then reacted with oxygen to form CuO on the surface. The oxidation of cuprous ions and the decrease of the copper content of the-spondumene type crystals brought about a considerable decrease in the lattice spooings.     

Structure and Nonlinear Optical Properties of Lanthanide Borate Glasses

The third–order nonlinear optical susceptibility, χ⁽³⁾, of lanthanide (lanthanum, praseodymium, neodymium, and samarium) borate glasses has been measured by the third harmonic generation method. The structure of the present glass system has been studied by infrared and Raman spectroscopic methods. The network structures of the present Ln₂O₃–B₂O₃ glasses have been confirmed to be basically similar to each other. Praseodymium, neodymium, and samarium borate glasses exhibit χ⁽³⁾ values that are larger than lanthanum borate glasses, because of the optical resonance effect, in accordance with the f – f transition. Especially, the χ⁽³⁾ value for 30Pr₂O₃·70B₂O₃ glass is 1.8 × 10⁻¹² esu, which is a factor of ∼60 larger than that of SiO₂ glass. This striking enhancement of χ⁽³⁾ is mainly attributed to the large transition moment to the first excitation state.