A new design strategy for DC/DC LLC resonant converter: Concept,modeling, and fabrication

In this paper, a new design procedure for LLC converter has been introduced. In fact, this method is a computer-based design algorithm based on a numerical technique. In the process of designing, the value of the resonant element is obtained by solving the LLC converter fundamental equation. This converter will be controlled by using state feedback, such as output voltage variable. As a matter of fact, in a control system, the change of output voltage (because of load variation) will affect the switching frequency, so the output voltage will be tuned. In the designing process, the fundamental equations of LLC converter are obtained, and the value of the resonant elements is calculated. Also, a comparison analysis is carried out between the proposed and typical methods. The simulation is done to investigate the validity of the proposed method. Moreover, a prototype is manufactured, and the experimental test is done to evaluate its applicability.     

Low temperature J-resistance curve determination of asphalt concrete using wavelet-Radon transform

A single specimen test using the three point single edge notched beam configuration at low temperatures for obtaining hot mix asphalt （HMA） resistance curves is developed.Resistance curves are obtained for mixtures at six temperature levels of＋5,0,-5,-10,-15,and-20 ℃ and three binder contents of 4％,4.5％,and 5％.Crack extension increments during the test are measured by means of an image processing technique using Radon transform and feature extraction.All the specimens exhibit a rising R-curve,indicating ductility and toughening mechanisms in the ductile-quasi brittle fracture of the mixture.It is observed that the reduction of temperature results in a further tendency of the mixture for unstable crack growth and less subcritical crack length.It is also shown that using the binarization process,an automatic index can be developed that can represent the extent of brittleness and extent of the low temperature in which the cracking has occurred.     

Pressure effects on dynamics behavior of multiwall boron nitride nanotubes

The dynamic behavior of Multiwall boron nitride nanotubes (MWBNNTs) is investigated by employing multiple elastic shells model. The influences of van der Waals interactions on layers are shown as nonlinear functions of the interlayer distance of MWBNNTs. Governing equations are solved by using the developed finite element method and by employing time history diagrams. The radial wave speed from the outermost layer to the innermost layer is computed. The effects of geometrical factors such as diameter-to-thickness ratio on dynamic behavior of MWBNNTs are determined. The magnification aspects of MWBNNTs are computed, and the effects of surrounding pressures on wave speed and magnification aspect of MWBNNTs are discussed.     

Modeling dynamic viscosity of n-alkanes using LSSVM technique

One of the important thermophysical properties is viscosity which expresses the resistance of fluid to flow. The least squares support vector machine (LSSVM) algorithm is proposed as a novel method for prediction of dynamic viscosity of different normal alkanes in a wide range of pressure and temperature. As this study is purely computational, 228 experimental data points were gathered from literature for training and validation of the model. The outcomes of the LSSVM algorithm were compared with the actual data with acceptable average absolute relative deviation and the coefficient of determination (R²) of 1.014 and 0.9968, respectively. The comparisons showed that the predicting model has the potential of prediction of n-alkane dynamic viscosity in terms of pressure, temperature, and carbon number of n-alkane, so this strategy can be used as a simple tool for predicting the behavior of reservoir fluids.     

Study of the behavior of mechanically stabilized earth (MSE) walls subjected to differential settlements

The limit equilibrium (LE) analysis has been used to design MSE walls. Presumably, the deflection of MSE walls can be limited to an acceptable range by ensuring sufficient factors of safety (FOSs) for both external and internal stabilities. However, unexpected ground movements, such as movements induced by excavations, volume changes of expansive soils, collapse of sinkholes, and consolidations of underlying soils, can induce excessive differential settlements that may influence both the stability and the serviceability of MSE walls. In this study, a numerical model, which was calibrated by triaxial tests and further by a specially-designed MSE wall tests, investigated the behavior of an MSE wall as well as the influence of various factors on the performance of the MSE wall when the wall facing settled relatively to the reinforced zone. The numerical results showed that the differential settlement would cause substantial vertical and horizontal movements for the MSE wall, as well as an increase in lateral earth pressure and geosynthetic reinforcement strain. The maximum horizontal movement and increase of the lateral earth pressure occurred at about 1.0 m above the toe. The differential settlement resulted in a critical plane that coincided with the plane of 45°+?/2. The maximum increase of the strain for each geogrid layer occurred in that plane, and the bottom layer had the greatest strain increase among all layers of reinforcement. The study further indicated that the surcharge, backfill friction angle, tensile stiffness of geogrid, reinforcement length and MSE wall height had noticeable influences on horizontal and vertical movements, and strain in geosynthetics. According to the results, the MSE wall that had a higher factor of safety would have less movements and geosynthetic strain increase. In contrast, only the friction angle, tensile stiffness and MSE wall height showed some degree of influence on the lateral earth pressure due to differential settlements.     

Critical aspects of sinter-hardening of prealloyed Cr–Mo steel

In recent years, growing demand for greater mechanical properties of PM steel components with competitive fabrication cost has led to significant innovations in different fields of powder metallurgy. Recent research has been focused on reaching higher performance with lower cost. To this end, the possibility of combining the conventional sintering and post-sintering processes for a particular powder composition has been introduced. Sinter-hardening is a result of the research conducted along this line. Elimination of any secondary operation such as quench-hardening by incorporating it in the sintering process (i.e. sinter-hardening) is of great interest, as it will lead to lower processing costs and equal, if not higher mechanical performance. However, to ensure the desired mechanical properties of the final component and robustness of the performance, critical aspects of the sinter-hardening process should be rigorously studied.Hence with specific attention to a Cr–Mo steel powder (FL-5305), this study deals with the influence of density on cooling rate, the effect of different sintering temperatures (e.g. 1120 °C and 1250 °C) on austenite grain size and consequently, hardenability. The microstructure development in sinter-hardened FL-5305 material has been analyzed and predicted by means of the available literature for solid steel and also using the commercial software (JMatPro 5.0) for materials assessment based on thermodynamic and kinetics modeling. Finally, inaccurate carbon control and its adverse impact on excessive formation of cementite have been addressed.     

Optimal design of gas turbine CHP plant with preheater and HRSG

Located in the south of Iran, Jiroft Paper Mill Company requires an integrated combined heat and power plant, which can provide 50 MW of electric power and 100 ton h^?1 saturated steam at 13 bar, to produce paper from an adjacent eucalyptus forest. The plant is composed of an air compressor, combustion chamber, air preheater, turbine, as well as a heat recovery steam generator. The design parameters of the plant were chosen as: compressor pressure ratio (r_c), compressor isentropic efficiency (η_AC), gas turbine isentropic efficiency (η_T), combustion chamber inlet temperature (T₃), and turbine inlet temperature (T₄). In order to optimally find the design parameters a thermoeconomic approach has been followed. An objective function representing the total cost of the plant in terms of dollar per second was defined as the sum of the operating cost related to the fuel consumption and the capital investment for equipment purchase and maintenance costs. Subsequently, different parts of the objective function have been expressed in terms of decision variables. Finally, the optimal values of decision variables were obtained by minimizing the objective function using sequential quadratic programming. The influence of changes in the demanded power and steam on the design parameters has also been studied for 40, 50, 60, and 70 MW of net power output, and 100, 120, and 150 ton h^?1 of saturated steam mass flow rate. Finally, the sensitivity analysis of change in design parameters with change in fuel or investment cost was performed. Copyright © 2009 John Wiley & Sons, Ltd.     

Teachers' use of software for pupils with specific learning difficulties

Abstract Previous research in the USA suggests that teachers use mainly drill and practice software programs to support reading problems for pupils with specific learning difficulties (SpLDs). More recently, holistic and active learning approaches have led to wider use of content free software. A small scale study was undertaken to explore teacher's use of software in supporting pupils' learning. The approach used questionnaires for 56 teachers and interviews for nine of those teachers who had responded. The teaching approach used by teachers was related to the type of software that they used (64 programs were identified). The software was categorised into 'drill and practice' and framework groups. The teachers who used whole book approaches to teaching preferred framework software. Teachers using structured approaches made more use of drill and practice software but also used framework software.     

Colposcopic evaluation of patients with abnormal cytologic smears during pregnancy

A new tube test for pregnancy, having a sensitivity of 0.5 I.U. of human chorionic gonadotropin per milliliter, was evaluated, along with two other commercially available kits, in a hospital patient population. Of 586 patients in the study, 302 were in nonobstetric services and many were acutely ill. Approximately one fourth of the women were age 40 or older. The medical records of 66% of the patients were retrieved to obtain information on the drugs administered prior to pregnancy testing. A small number of problems did occur in the pregnancy test procedures. Inconclusive results were recorded for both pregnant and nonpregnant patients and could not be correlated with disease states and/or medications. The importance of a reagent control for tube test procedures is discussed.