Electrical and optical properties of semi-insulating polycrystalline silicon thin films: the role of microstructure and doping

We have investigated the relationship between microstructure and electrical conductivity in semi-insulating polycrystalline silicon (SIPOS) with oxygen concentrations in the 2–35 at.% range and the effect of doping with boron, phosphorus, arsenic and erbium by ion implantation. SIPOS thin films are mixtures of silicon and silicon oxide phases. The chemical and morphological evolution of these phases upon annealing is emphasized. Electrical conductivity measurements are interpreted in terms of a physical model containing few free parameters related to the material microstructure. A direct extension of this model explains also the conductivity increase in SIPOS doped with elements of the third or the fifth group. In the last part of the paper, data of electroluminescence at 1.54 μm in Er-implanted SIPOS due to intra-4f transitions of the Er³⁺ ion are shown and discussed.     

A Constraint-based Approach for Annotating Music Scores with Gestural Information

The physical gestures that operate music instruments are responsible for the qualities of the sound being produced in a performance. Gestural information is thereby crucial for a model of music performance, paired with a model of sound synthesis where this information is applied. The highly constrained nature of performers gestures makes this task suitable to be modeled via a constraint-based approach, coupled with a strategy aimed at maximizing the gestural comfort of performers. We illustrate the problem representation, the search strategy and a validation of the model against human performance.     

Xylene Isomerization in a ZSM-5/SS Membrane Reactor

A membrane reactor containing different types of ZSM-5/porous SS membranes was used to perform the xylene isomerization reaction. The parent Na-ZSM-5 layer was synthesized by secondary growth on top of porous stainless steel tubes. The xylene isomerization reaction was carried out at different temperatures in the membrane reactor and in a fixed-bed reactor of identical geometry for comparison. Two different kinds of membranes were prepared by ion exchange: a Pt/H-ZSM-5 catalytic membrane and two Ba-ZSM-5 composites with different Ba²⁺ concentration. The p-xylene production using 100% exchanged Ba-membrane was about 28% higher than the fixed-bed reactor at 370 °C, when m-xylene was fed.     

Development of an undergraduate course – Internet-based instrumentation and control

The objective, strategy, and implementation details of a new undergraduate course, Internet-based Instrumentation and Control, are presented. The course has a companion laboratory that is supported by the National Science Foundation and industry. The combination is offered to senior-level undergraduate engineering students interested in sensing, instrumentation, control, and web programming that want to learn more about the integration of these technologies for solving real-world engineering problems. The course will also be offered to gifted high school seniors with similar interests and can serve as a vehicle to attract them to engineering disciplines. Preliminary assessment of the first offering of the course is encouraging and has shown that the course has achieved success in helping students understand concepts and master basic technologies for developing Internet-based automatic systems.     

A methodology for the performance evaluation of data querystrategies in universal mobile telecommunication systems (UMTS)

The anticipated emergence of third-generation mobile systems, referred to as universal mobile telecommunication systems (UMTS), raises the problem of reconsidering the design of the databases destined to contain the user information. In particular, it is expected that the key concepts of the new database architectures will be high distribution and fast updating of information. So far, the problem of determining the most appropriate distributed database (DDB) architectures for third-generation mobile systems has not been widely dealt with in literature. This paper presents a methodology for evaluating hierarchical DDB architectures by means of an analytical model of the data querying operation. This methodology allows for structural alternatives, differing on account of the number of levels and branches in the hierarchy, to be evaluated in terms of query loads and mean response times, according to a given user mobility characterization and a given search protocol operation. By way of illustration, the paper discusses a case study, concerning a query operation arising from a location updating procedure and applied to a hierarchical tree-like DDB in which some structural alternatives are considered     

Molecular dynamics simulations of polyphosphazenes: poly[bis(chloro)phosphazene][NPCl2] n

Suitable parameter sets for the CHARMm force field were derived for the structural units in polychlorophosphazene [P=N, P N, P Cl] using the Dinur Hagler energy second derivative procedure based on quantum mechanical SCI calculations using the 6–31G^* basis set. To validate the reliability of the parameter set, structural results obtained with CHARMm for the adopted model compounds (OP₂NCl₅ and OP₃N₂Cl₅) were compared with those derived fromab initio quantum mechanics using the 6–31G^* basis set. Application of molecular dynamics (MD) simulations in combinatioin with the available X-ray diffraction data provided structural and conformational information on the polymer. The calculation made using the periodic boundary conditions (PBC) agree well with the polychlorophosphazene ordered in a monoclinic unit cell (a=5.98,b=12.99,c=4.92 A; β=111.7). This model was stabilized mainly by the image atoms contribution to the electrostatic energy term and had aquasi-planar conformation of the backbone chain (glide symmetry). The MD calculations also provided evidence that the difference between single and double PN bonds is less marked than that measured experimentally. This result is, however, in agreement with more recent and accurate X-ray studies on poly(methylphosphazene). Validation of the polymer model provided a complete picture, otherwise experimentally inaccessible, of the internal fluctuations of the polymeric chains.     

Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

Preceramic organoboron–silicon polymers

Several boron-containing organosilicon polymers were synthesized from a sodium-coupling reaction of silicon and boron halides with and without alkyl halide in hydrocarbon solvents. The B–Si preceramic polymers were characterized using techniques such as IR, UV, and NMR spectrometry, gel permeation chromatography, elemental analysis, molecular weight measurement, and thermal analyses (TGA, DSC, DTA, and TMA). The chemical structures of the preceramic polymers were postulated based on the analytical results. Black ceramic materials were obtained from the precursor polymers upon thermal degradation at temperatures above 1000°C in an inert atmosphere. The precursor polymers had a ceramic yield of up to 70%. Thermogravimetric analysis of the ceramic material in air at a flow rate of 100 mL/min showed it was stable up to 1000°C with little weight gain or loss. Several methods were used to characterize the ceramic materials: XRD, solid NMR, high-temperature DTA, elemental analysis, and acid digestion. The analyses indicated that the ceramic materials comprised a mixture of silicon carbide (SiC), silicon borides (SiB₄, SiB₆), and amorphous Si–B–C ceramics, with small amounts of silica and free silicon.