Investigation on replication of microfluidic channels by hot embossing

In this study, effects of embossing temperature, time, and force on production of a microfluidic device were investigated. Polymethyl methacrylate (PMMA) substrates were hot embossed by using a micromilled aluminum mold. The process parameters were altered to observe the variation of replication rate in width and depth as well as symmetry of the replicated microfluidic channels. Analysis of variance (ANOVA) on the experimental results indicated that embossing temperature was the most important process parameter, whereas embossing time and force have less impact. One distinguishing aspect of this study is that, the channels were observed to be skewed to either side of the channel depending on the location of the protrusions on the mold. The mechanism of the skewness was investigated by finite element analysis and discussed in detail. Results showed that the skewness depends on the flow characteristics of the material and could be reduced by increasing the embossing temperature. The best replication rates were obtained at parameter settings of 115°C, 10?kN, and 8?min for the molds with minimum 56?µm wide features of 120?µm depth. We also showed that the fabricated channels could be successfully sealed by solvent-assisted thermo-compressive bonding at 85°C under 5.5?kN force.     

Graphene oxide reinforced polyvinyl alcohol/polyethylene glycol blend composites as high-performance dielectric material

Novel flexible dielectric composites composed of polyvinyl alcohol (PVA), polyethylene glycol (PEG), and graphene oxide (GO) with high dielectric constant and low dielectric loss have been developed using facile and eco-friendly colloidal processing technique. The structure and morphology of the PVA/PEG/GO composites were evaluated using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, UV-vis spectroscopy (UV-vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The dielectric behavior of PVA/PEG/GO composites was investigated in the wide range of frequencies from 50 Hz to 20 MHz and temperature in the range 40 to 150 °C using impedance spectroscopy. The dielectric constant for PVA and PVA/PEG (50/50) blend film was found to be 10.71 (50 Hz, 150 °C) and 31.22 (50 Hz, 150 °C), respectively. The dielectric constant for PVA/PEG/GO composite with 3 wt% GO was found to be 644.39 (50 Hz, 150 °C) which is 60 times greater than the dielectric constant of PVA and 20 times greater than the dielectric constant of PVA/PEG (50/50) blend film. The PVA/PEG/GO composites not only show high dielectric constant but also show low dielectric loss which is highly attractive for practical applications. These findings underline the possibilities of using PVA/PEG/GO composites as a flexible dielectric material for high-performance energy storage applications such as embedded capacitors.     

Reduction of carbamylated albumin by extended hemodialysis

Introduction Among conventional hemodialysis (CHD) patients, carbamylated serum albumin (C‐Alb) correlates with urea and amino acid deficiencies and is associated with mortality. We postulated that reduction of C‐Alb by intensive HD may correlate with improvements in protein metabolism and cardiac function. Methods One‐year observational study of in‐center nocturnal extended hemodialysis (EHD) patients and CHD control subjects. Thirty‐three patients receiving 4‐hour CHD who converted to 8‐hour EHD were enrolled, along with 20 controls on CHD. Serum C‐Alb, biochemistries, and cardiac MRI parameters were measured before and after 12 months of EHD. Findings EHD was associated with reduction of C‐Alb (average EHD change ?3.20 mmol/mol [95% CI ?4.23, ?2.17] compared to +0.21 [95% CI ?1.11, 1.54] change in CHD controls, P < 0.001). EHD was also associated with increases in average essential amino acids (in standardized units) compared to CHD (+0.38 [0.08, 0.68 95%CI]) vs. ?0.12 [?0.50, 0.27, 95% CI], P = 0.047). Subjects who reduced C‐Alb more than 25% were found to have reduced left ventricular mass, increased urea reduction ratio, and increased serum albumin compared to nonresponders, and % change in C‐Alb significantly correlated with % change in left ventricular mass. Discussion EHD was associated with reduction of C‐Alb as compared to CHD, and reduction of C‐Alb by EHD correlates with reduction of urea. Additional studies are needed to test whether reduction of C‐Alb by EHD also correlates with improved clinical outcomes.     

Morphology,Ionic Conductivity,and Impedance Spectroscopy Studies of Graphene Oxide-Filled Polyvinylchloride Nanocomposites

Graphene oxide was synthesized using modified Hummers method. The preparation of polyvinylchloride/graphene oxide nanocomposites was carried out using colloidal processing. The morphology of polyvinylchloride/graphene oxide nanocomposite confirms that graphene oxide was uniformly distributed within the polyvinylchloride matrix indicating complete exfoliation of graphene oxide. Significant improvement in the microhardness of the nanocomposite was observed as compared to neat polyvinylchloride. The impedance spectroscopy of nanocomposites was carried out in the frequency range (50 Hz to 35 MHz) and temperature range (80–150°C). Thus, based on the results obtained, we found that polyvinylchloride/graphene oxide nanocomposites hold great promise in many potential applications such as an electrode material for supercapacitors.     

Photothermal nanoblade for large cargo delivery into mammalian cells

It is difficult to achieve controlled cutting of elastic, mechanically fragile, and rapidly resealing mammalian cell membranes. Here, we report a photothermal nanoblade that utilizes a metallic nanostructure to harvest short laser pulse energy and convert it into a highly localized explosive vapor bubble, which rapidly punctures a lightly contacting cell membrane via high-speed fluidic flows and induced transient shear stress. The cavitation bubble pattern is controlled by the metallic structure configuration and laser pulse duration and energy. Integration of the metallic nanostructure with a micropipet, the nanoblade generates a micrometer-sized membrane access port for delivering highly concentrated cargo (5 × 10(8) live bacteria/mL) with high efficiency (46%) and cell viability (>90%) into mammalian cells. Additional biologic and inanimate cargo over 3-orders of magnitude in size including DNA, RNA, 200 nm polystyrene beads, to 2 μm bacteria have also been delivered into multiple mammalian cell types. Overall, the photothermal nanoblade is a new approach for delivering difficult cargo into mammalian cells.     

Microstructure–conductivity relationship of Na3Zr2(SiO4)2(PO4) ceramics

The ionic conductivity of solid electrolytes is dependent on synthesis and processing conditions, ie, powder properties, shaping parameters, sintering time (t_s), and sintering temperature (T_s). In this study, Na₃Zr₂(SiO₄)₂(PO₄) was sintered at 1200 and 1250°C for 0-10 hours and its microstructure and electrical performance were investigated by means of scanning electron microscopy and impedance spectroscopy. After sintering under all conditions, the sodium super-ionic conductor-type structure was formed along with ZrO₂ as a secondary phase. The microstructure investigation revealed a bimodal particle size distribution and grain growth at both T_s. The density of samples increased from 60% at 1200°C for 0 hours to 93% at 1250°C for 10 hours. The ionic conductivity of the samples increased with t_s due to densification and grain growth, ranging from 0.13 to 0.71 mS/cm, respectively. The corresponding equivalent circuit fitting for the impedance spectra revealed that grain boundary resistance is the prime factor contributing to the changing conductivity after sintering. The activation energy of the bulk conductivity (E_a,bulk) remained almost constant (0.26 eV) whereas the activation energy of the total conductivity (E_a) exhibited a decreasing trend from 0.37 to 0.30 eV for the samples with t_s = 0 and 10 hours, respectively—both sintered at 1250°C. In this study, the control of the grain boundaries improved the electrical conductivity by a factor of 6.     

Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites

ABSTRACT

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO₂) nanoparticles (NP_S) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO₂ nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO₂ nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO₂ NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO₂ nanocomposite films as low cost, lightweight and flexible material for EMI shielding.     

Dielectric properties and electromagnetic interference shielding studies of nickel oxide and tungsten oxide reinforced polyvinylchloride nanocomposites

ABSTRACT

Polyvinylchloride (PVC)/nickel oxide (NiO)/tungsten oxide (WO₃) nanocomposite films were prepared via solution casting technique. The crystallinity, morphology, and the analysis of dispersion state of PVC/NiO/WO₃ nanocomposite was carried out using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The dielectric studies of nanocomposite films were investigated and a maximum dielectric constant of 2.3 with dielectric loss (tan δ) of 2.4 was attained. The EMI shielding studies were carried out in the X and Ku-band frequency range (8 GHz-18 GHz). The maximum SE of 15.78 dB in X-band and 12.05 dB in Ku-band was achieved for 75/20/5 compositions of the PVC/NiO/WO₃ nanocomposite.     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.